View source for Watcom Makefile Procedure

← Watcom Makefile Procedure

You do not have permission to edit this page, for the following reasons:
The action you have requested is limited to users in one of the groups: Users, Administrators.
You must confirm your email address before editing pages. Please set and validate your email address through your user preferences.
You can view and copy the source of this page.
<pre>
;;; -*- Scheme -*-   wmaker.scm  ..bm2008-jan-27
;;; prints OpenWatcom 1.7a makefile for Gambit-C v4.1.2
;;; - unpack into c:/Gambit-W ..(change name later as needed)
;;; - copy wmaker.scm to c:/Gambit-W/misc
;;; - gsi wmaker
;;; - wmake -f Makefile.wcc

(define (print-title)
  (display "# OpenWatcom 1.7a Makefile for Gambit-C v4.1.2\n\n"))

;; matches targets to compilation rules given list of associations,pathname
(define (wcc-target-rule pair-list folder)
  ;; pair-list .. associated targets and compile rule
  ;; folder .. pathname prefix
  (let ([s (length pair-list)])
    (let loop ([i 0])
      (if (< i s)
	  (begin
	    (display 
	     (string-append
	      folder (list-ref pair-list i) 
	      ".obj: " folder (list-ref pair-list i) ".c\n"
	      "\t" (list-ref pair-list (+ i 1))
	      " -bt=$(NTO) $*.c -fo=$*.obj\n\n"))
	    (newline)
	    (loop (+ i 2)))))))


(define (gambitc-dir)
  ;; modified name avoids clash with possible c:/Gambit-C/
  (display "GAMBCDIR=\"C:/Gambit-W")
  ;;trailing slashes are seen in Gambit batch files so..
  (let loop1 ((i 0))
    (if (< i 75)
	(begin
	  (display (string #\/ #\. ))
	  (loop1 (+ i 1)))))
  (display (string #\"))
  (newline))

(define (dll-enable)
  ;; not using 'nt_dll' yet
  (display "\nNTO=nt \nNTDLL=nt\n"))

(define (folders)
  (display 
   (string-append
    "INCDIRS = -Ic:\\WATCOM\\H -Ic:\\WATCOM\\H\\NT -I..\\include\n"
    "BINDIR  = ..\\bin\n"
    "GSCDIR  = ..\\gsc\n"
    "GSIDIR  = ..\\gsi\n"
    "LIBDIR  = ..\\lib\n\n"
    "LIBNAME = gambc.lib\n"
    "WINLIBS = ws2_32.lib\n"
    "WINGUILIBS = $(WINLIBS) kernel32.lib user32.lib gdi32.lib\n\n")))

(define (comp-gen)
  ;; copied from "misc/openwatcom.bat" 
  ;; -3r for 386, was changed to -5r for pentium
  (display
   (string-append
    "\nCOMP_GEN=wcc386 -w0 -zp4 -zq -obetir -bm -5r -mf &\n"
    "\t$(INCDIRS) &\n"
    "\t-D___GAMBCDIR=$(GAMBCDIR) -D___SYS_TYPE_CPU=\"i686\" &\n"
    "\t-D___SYS_TYPE_VENDOR=\"pc\" -D___SYS_TYPE_OS=\"openwatcom\" &\n"
    "\t-D___IMPORTED_ID_SUFFIX=\"_\" \n\n"
    "COMP_LIB_MH\t=$(COMP_GEN) -D___LIBRARY\n"
    "COMP_LIB_PR_MH\t=$(COMP_LIB_MH) -D___PRIMAL\n"
    "COMP_LIB\t=$(COMP_LIB_MH) -D___SINGLE_HOST\n"
    "COMP_LIB_PR\t=$(COMP_LIB_PR_MH) -D___SINGLE_HOST\n"
    "COMP_APP\t=$(COMP_GEN) -D___SINGLE_HOST\n\n")))

(define (target-all)
  ;; default rule to compile library, gsi, and gsc
  (display 
   (string-append 
    "all: $(LIBDIR)\\gambc.lib $(BINDIR)\\gsi.exe "
    "$(BINDIR)\\gsc.exe\n\n")))

;; --------------- gsi section --------------------------
(define gsi-files
  (list "_gsilib" "_gambcgsi" "_gsi" "_gsi_" ))

(define (gsi-target-list gsi-files)
  ;; tell wcc the dependents to compile and the rule for executable
  (define (gsi-target-item  name )
    (display (string-append "GSIOBJS += $(GSIDIR)\\" name ".obj\n")))
  (display "GSIOBJS=\n")
  (for-each gsi-target-item gsi-files)
  (newline)
  (display 
   (string-append
    "\n$(BINDIR)\\gsi.exe: $(GSIOBJS)\n"
    "\twlink name $*.exe op quiet op stack=16384 system nt &\n"
    "\t\tfile {$(GSIOBJS)} &\n"
    "\t\tlibrary { $(LIBDIR)\\$(LIBNAME) $(WINLIBS)}\n\n")))

;; -- target-name ..... rule ---
(define gsi-pairs
  (list "_gsilib"    "$(COMP_LIB)"
	"_gambcgsi"  "$(COMP_LIB)"
	"_gsi"       "$(COMP_APP)"
	"_gsi_"      "$(COMP_APP)"))

;; --------------- gsc section --------------------------

(define gsc-pairs
  (list 
   "_host"     "$(COMP_LIB)"
   "_utils"    "$(COMP_LIB)"
   "_source"   "$(COMP_LIB)"
   "_parms"    "$(COMP_LIB)"
   "_env"      "$(COMP_LIB)"
   "_ptree1"   "$(COMP_LIB)"
   "_ptree2"   "$(COMP_LIB)"
   "_gvm"      "$(COMP_LIB)"
   "_back"     "$(COMP_LIB)"
   "_front"    "$(COMP_LIB)"
   "_prims"    "$(COMP_LIB)"
   "_t-c-1"    "$(COMP_LIB)"
   "_t-c-2"    "$(COMP_LIB)"
   "_t-c-3"    "$(COMP_LIB)"
   "_gsclib"   "$(COMP_LIB)"
   "_gambcgsc" "$(COMP_LIB)" 
   "_gsc"      "$(COMP_APP)"
   "_gsc_"     "$(COMP_APP)"
))

(define (gsc-target-list gsc-pairs)

  ;; tell wcc the dependents to compile and the rule for executable
  (define (gsc-target-item  name )
    (display (string-append "GSCOBJS += $(GSCDIR)\\" name ".obj\n")))

  (display "GSCOBJS=\n")
  ;;(for-each gsc-target-item gsc-files)
  
  (let ([s (length gsc-pairs)])
    (let loop ([i 0])
      (if (< i s)
	  (begin
	    (gsc-target-item (list-ref gsc-pairs i))
	    (loop (+ i 2))))))
  
  (display 
   (string-append
    "\n$(BINDIR)\\gsc.exe: $(GSCOBJS)\n"
    "\twlink name $*.exe op quiet op stack=16384 system nt &\n"
    "\t\tfile {$(GSCOBJS)} &\n"
    "\t\tlibrary { $(LIBDIR)\\$(LIBNAME) $(WINLIBS)}\n\n")))

;; --------------- lib section --------------------------
(define lib-pairs
  (list 
 "main"       "$(COMP_LIB_PR)"
 "setup"      "$(COMP_LIB_PR)"
 "mem"        "$(COMP_LIB_PR)"
 "os"         "$(COMP_LIB_PR)"
 "os_base"    "$(COMP_LIB_PR)"
 "os_time"    "$(COMP_LIB_PR)"
 "os_shell"   "$(COMP_LIB_PR)"
 "os_files"   "$(COMP_LIB_PR)"
 "os_dyn"     "$(COMP_LIB_PR)"
 "os_tty"     "$(COMP_LIB_PR)"
 "os_io"      "$(COMP_LIB_PR)"
 "c_intf"     "$(COMP_LIB_PR)"
 "_kernel"    "$(COMP_LIB_PR)"
 "_system"    "$(COMP_LIB_PR)"
 "_num"       "$(COMP_LIB_PR_MH)"
 "_std"       "$(COMP_LIB_PR)"
 "_eval"      "$(COMP_LIB_PR)"
 "_io"        "$(COMP_LIB_PR_MH)"
 "_nonstd"    "$(COMP_LIB_PR)"
 "_thread"    "$(COMP_LIB_PR)"
 "_repl"      "$(COMP_LIB_PR)"
 "_gambc"     "$(COMP_LIB_PR)"

))

(define (lib-target-list lib-pairs)
  
  ;; tell wcc the dependents to compile and the rule for executable
  (define (lib-target-item  name )
    (display (string-append "LIBOBJS += $(LIBDIR)\\" name ".obj\n")))
  
  (display "LIBOBJS=\n")
  ;;(for-each gsc-target-item gsc-files)
  
  (let ([s (length lib-pairs)])
    (let loop ([i 0])
      (if (< i s)
	  (begin
	    (lib-target-item (list-ref lib-pairs i))
	    (loop (+ i 2))))))
  
  (display 
   (string-append
    "\n$(LIBDIR)\\gambc.lib: $(LIBOBJS)\n"
    "\twlib /q /n /t $*.lib $(LIBOBJS)\n\n")))


(define (prepare-header)
  (let ([ OUT #f] [INP #f] [inchar #f] [hatch (integer->char 35)] )
    (set! OUT (open-output-file "../include/gambit.h"))
    (set! INP (open-input-file  "../include/gambit.h.in"))

    (display
     (string-append 
      (string hatch) " ifndef ___VOIDSTAR_WIDTH\n"
      (string hatch) " define ___VOIDSTAR_WIDTH ___LONG_WIDTH\n"
      (string hatch) " endif\n"
      (string hatch) " ifndef ___MAX_CHR\n"
      (string hatch) " define ___MAX_CHR 0x10ffff\n"
      (string hatch) " endif\n\n")
     OUT)
    (let reader ()
      (set! inchar (read-char INP ))
      (if (eof-object? inchar)
	  #f
	  (begin
	    (write-char inchar OUT)
	    (reader))))
    
    (close-input-port INP)
    (close-output-port OUT)))

(define (maker)
  (print-title)
  (gambitc-dir)
  (newline)
  (folders)
  (dll-enable)
  (comp-gen)
  (target-all)
  
  (lib-target-list lib-pairs )
  (wcc-target-rule lib-pairs "$(LIBDIR)\\")
  
  (gsi-target-list gsi-files )
  (wcc-target-rule gsi-pairs "$(GSIDIR)\\")
  
  (gsc-target-list gsc-pairs )
  (wcc-target-rule gsc-pairs "$(GSCDIR)\\")
  
  ;;(display "..done\n")
  )

(prepare-header)
(with-output-to-file "Makefile.wcc" maker )

 ------------- snip ---------------------------
# -------------------------------------------------------------------
# Example Application Makefile
# Compiler:  OpenWatcom C++ v1.7a

WINLIBS = ws2_32.lib
#WINGUILIBS = kernel32.lib user32.lib gdi32.lib

GAMBITROOT = c:\Gambit-W
WATCOM	= c:\WATCOM
INCDIRS  = -I$(WATCOM)\H
INCDIRS	+= -I$(WATCOM)\H\NT 
INCDIRS	+= -I$(GAMBITROOT)\include 
INCDIRS	+= -I..\clib

LIBDIR	= $(GAMBITROOT)\lib

SCM	= ..\scheme
CLIB	= ..\clib

PGM	= hoi
OBJS	= model.obj screen.obj page0.obj page1.obj menubar.obj sk_tty.obj &
	start.obj start_.obj

WCC_OPTS= -w0 -zp4 -zq -obetir -bm -5r -mf $(INCDIRS) &
	-D___SYS_TYPE_CPU="i686" -D___SINGLE_HOST &
	-D___SYS_TYPE_VENDOR="pc" -D___SYS_TYPE_OS="openwatcom" &
	-D___IMPORTED_ID_SUFFIX="_"

all:	start_.obj
        wlink name hoi.exe op quiet op stack=16384 system nt &
        file {$(OBJS)} &
	library { $(LIBDIR)\gambc.lib $(WINLIBS) $(CLIB)\pdcurses.lib}
	
start_.obj: .always
	gsc -c $(SCM)\model.scm
	gsc -c $(SCM)\screen.scm
	gsc -c $(SCM)\page0.scm
	gsc -c $(SCM)\page1.scm
	gsc -c $(SCM)\menubar.scm
	gsc -c $(SCM)\start.scm
	gsc -link &
		$(SCM)\model.c &
		$(SCM)\screen.c &
		$(SCM)\page0.c &
		$(SCM)\page1.c &
		$(SCM)\menubar.c &
		$(SCM)\start.c
	wcc386 $(WCC_OPTS) $(CLIB)\sk_tty.c
	wcc386 $(WCC_OPTS) $(SCM)\model.c
	wcc386 $(WCC_OPTS) $(SCM)\screen.c
	wcc386 $(WCC_OPTS) $(SCM)\page0.c
	wcc386 $(WCC_OPTS) $(SCM)\page1.c
	wcc386 $(WCC_OPTS) $(SCM)\menubar.c
	wcc386 $(WCC_OPTS) $(SCM)\start.c
	wcc386 $(WCC_OPTS) $(SCM)\start_.c

## end


</pre>
Return to Watcom Makefile Procedure.
Retrieved from "https://gambitscheme.org/wiki/index.php?title=Watcom_Makefile_Procedure"