[Top] [Contents] [Index] [ ? ]

Gambit-C

This manual documents Gambit-C. It covers release v4.6.6.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

1. The Gambit-C system

The Gambit programming system is a full implementation of the Scheme language which conforms to the R4RS, R5RS and IEEE Scheme standards. It consists of two main programs: gsi, the Gambit Scheme interpreter, and gsc, the Gambit Scheme compiler.

Gambit-C is a version of the Gambit programming system in which the compiler generates portable C code, making the whole Gambit-C system and the programs compiled with it easily portable to many computer architectures for which a C compiler is available. With appropriate declarations in the source code the executable programs generated by the compiler run roughly as fast as equivalent C programs.

For the most up to date information on Gambit and add-on packages please check the Gambit web page at http://gambit.iro.umontreal.ca. The web page has links to the Gambit mailing list, the bug reporting system, and the source code repository.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

1.1 Accessing the system files

Files related to Gambit, such as executables, libraries and header files, are stored in multiple Gambit installation directories. Gambit may be installed on a system according to two different installation models.

In the first model there is a single directory where all the Gambit installation directories are stored. This central installation directory is typically /usr/local/Gambit-C under UNIX, /Library/Gambit-C under Mac OS X and C:/Program Files/Gambit-C under Microsoft Windows. This may have been overridden when the system was built with the command ‘configure --prefix=/my/Gambit-C’. If the system was built with the command ‘configure --enable-multiple-versions’ then the central installation directory is prefix/version, where version is the system version string (e.g. v4.6.6 for Gambit v4.6.6). Moreover, prefix/current will be a symbolic link which points to the central installation directory. In this model, the Gambit installation directory named X is simply the subdirectory X of the central installation directory.

In the second model some or all of the Gambit installation directories are stored in installation specific directories. The location of these directories is assigned when the system is built using the command ‘configure --bindir=/my/bin --includedir=/my/include --libdir=/my/lib’.

The advantage of the first model is that it is easy to have multiple versions of Gambit coexist and to remove all the files of a given version. However, the second model may be necessary to conform to the package installation conventions of some operating systems.

Executable programs such as the interpreter gsi and compiler gsc can be found in the bin installation directory. Adding this directory to the PATH environment variable allows these programs to be started by simply entering their name. This is done automatically by the Mac OS X and Microsoft Windows installers.

The runtime library is located in the lib installation directory. When the system’s runtime library is built as a shared-library (with the command ‘configure --enable-shared’) all programs built with Gambit-C, including the interpreter and compiler, need to find this library when they are executed and consequently this directory must be in the path searched by the system for shared-libraries. This path is normally specified through an environment variable which is LD_LIBRARY_PATH on most versions of UNIX, LIBPATH on AIX, SHLIB_PATH on HPUX, DYLD_LIBRARY_PATH on Mac OS X, and PATH on Microsoft Windows. If the shell is sh, the setting of the path can be made for a single execution by prefixing the program name with the environment variable assignment, as in:

 
$ LD_LIBRARY_PATH=/usr/local/Gambit-C/lib gsi

A similar problem exists with the Gambit header file gambit.h, located in the include installation directory. This header file is needed for compiling Scheme programs with the Gambit-C compiler. When the C compiler is being called explicitly it may be necessary to use a -I<dir> command line option to indicate where to find header files and a -L<dir> command line option to indicate where to find libraries.

Access to both of these files can be simplified by creating a link to them in the appropriate system directories (special privileges may however be required):

 
$ ln -s /usr/local/Gambit-C/lib/libgambc.a /usr/lib # name may vary
$ ln -s /usr/local/Gambit-C/include/gambit.h /usr/include

Alternatively these files can be copied or linked in the directory where the C compiler is invoked (this requires no special privileges).

Another approach is to set some environment variables which are used to tell the C compiler where to find header files and libraries. For example, the following settings can be used for the gcc C compiler:

 
$ export LIBRARY_PATH=/usr/local/Gambit-C/lib
$ export CPATH=/usr/local/Gambit-C/include

Note that this may have been done by the installation process. In particular, the Mac OS X and Microsoft Windows prebuilt installers set up the environment so that the gcc compiler finds these files automatically.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2. The Gambit Scheme interpreter

Synopsis:

 
gsi [-:runtimeoption,…] [-i] [-f] [-v] [[-] [-e expressions] [file]]

The interpreter is executed in interactive mode when no file or ‘-’ or ‘-e’ option is given on the command line. Otherwise the interpreter is executed in batch mode. The ‘-i’ option is ignored by the interpreter. The initialization file will be examined unless the ‘-f’ option is present (see section Customization). The ‘-v’ option prints the system version string, system time stamp, operating system type, and configure script options on standard output and exits. Runtime options are explained in Runtime options.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.1 Interactive mode

In interactive mode a read-eval-print loop (REPL) is started for the user to interact with the interpreter. At each iteration of this loop the interpreter displays a prompt, reads a command and executes it. The commands can be expressions to evaluate (the typical case) or special commands related to debugging, for example ‘,q’ to terminate the process (for a complete list of commands see Debugging). Most commands produce some output, such as the value or error message resulting from an evaluation.

The input and output of the interaction is done on the interaction channel. The interaction channel can be specified through the runtime options but if none is specified the system uses a reasonable default that depends on the system’s configuration. When the system’s runtime library was built with support for GUIDE, the Gambit Universal IDE (with the command ‘configure --enable-guide’) the interaction channel corresponds to the console window of the primordial thread (for details see GUIDE), otherwise the interaction channel is the user’s console, also known as the controlling terminal in the UNIX world. When the REPL starts, the ports associated with ‘(current-input-port)’, ‘(current-output-port)’ and ‘(current-error-port)’ all refer to the interaction channel.

Expressions are evaluated in the global interaction environment. The interpreter adds to this environment any definition entered using the define and define-macro special forms. Once the evaluation of an expression is completed, the value or values resulting from the evaluation are output to the interaction channel by the pretty printer. The special “void” object is not output. This object is returned by most procedures and special forms which the Scheme standard defines as returning an unspecified value (e.g. write, set!, define).

Here is a sample interaction with gsi:

 
$ gsi
Gambit v4.6.6

> (define (fact n) (if (< n 2) 1 (* n (fact (- n 1)))))
> (map fact '(1 2 3 4 5 6))
(1 2 6 24 120 720)
> (values (fact 10) (fact 40))
3628800
815915283247897734345611269596115894272000000000
> ,q

What happens when errors occur is explained in Debugging.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.2 Batch mode

In batch mode the command line arguments denote files to be loaded, REPL interactions to start (‘-’ option), and expressions to be evaluated (‘-e’ option). Note that the ‘-’ and ‘-e’ options can be interspersed with the files on the command line and can occur multiple times. The interpreter processes the command line arguments from left to right, loading files with the load procedure and evaluating expressions with the eval procedure in the global interaction environment. After this processing the interpreter exits.

When the file name has no extension the load procedure first attempts to load the file with no extension as a Scheme source file. If that file doesn’t exist it will search for both a source file and an object file. The object file’s name is obtained by adding to the file name a ‘.on’ extension with the highest consecutive version number starting with 1. The source file’s name is obtained by adding to the file name the file extensions ‘.scm’ and ‘.six’ (the first found is the source file). If both a source file and an object file exist, then the one with the latest modification time is loaded. Otherwise the file that is found is loaded. When the file name has an extension, the load procedure will only attempt to load the file with that specific name.

When the extension of the file loaded is ‘.scm’ the content of the file will be parsed using the normal Scheme prefix syntax. When the extension of the file loaded is ‘.six’ the content of the file will be parsed using the Scheme infix syntax extension (see Scheme infix syntax extension). Otherwise, gsi will parse the file using the normal Scheme prefix syntax.

The ports associated with ‘(current-input-port)’, ‘(current-output-port)’ and ‘(current-error-port)’ initially refer respectively to the standard input (‘stdin’), standard output (‘stdout’) and the standard error (‘stderr’) of the interpreter. This is true even in REPLs started with the ‘-’ option. The usual interaction channel (console or IDE’s console window) is still used to read expressions and commands and to display results. This makes it possible to use REPLs to debug programs which read the standard input and write to the standard output, even when these have been redirected.

Here is a sample use of the interpreter in batch mode, under UNIX:

 
$ cat h.scm
(display "hello") (newline)
$ cat w.six
display("world"); newline();
$ gsi h.scm - w.six -e "(pretty-print 1)(pretty-print 2)"
hello
> (define (display x) (write (reverse (string->list x))))
> ,(c 0)
(#\d #\l #\r #\o #\w)
1
2

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.3 Customization

There are two ways to customize the interpreter. When the interpreter starts off it tries to execute a ‘(load "~~lib/gambcext")’ (for an explanation of how file names are interpreted see Host environment). An error is not signaled when the file does not exist. Interpreter extensions and patches that are meant to apply to all users and all modes should go in that file.

Extensions which are meant to apply to a single user or to a specific working directory are best placed in the initialization file, which is a file containing Scheme code. In all modes, the interpreter first tries to locate the initialization file by searching the following locations: ‘.gambcini’ and ‘~/.gambcini’ (with no extension, a ‘.scm’ extension, and a ‘.six’ extension in that order). The first file that is found is examined as though the expression (include initialization-file) had been entered at the read-eval-print loop where initialization-file is the file that was found. Note that by using an include the macros defined in the initialization file will be visible from the read-eval-print loop (this would not have been the case if load had been used). The initialization file is not searched for or examined when the ‘-f’ option is specified.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.4 Process exit status

The status is zero when the interpreter exits normally and is nonzero when the interpreter exits due to an error. Here is the meaning of the exit statuses:

0

The execution of the primordial thread (i.e. the main thread) did not encounter any error. It is however possible that other threads terminated abnormally (by default threads other than the primordial thread terminate silently when they raise an exception that is not handled).

64

The runtime options or the environment variable ‘GAMBCOPT’ contained a syntax error or were invalid.

70

This normally indicates that an exception was raised in the primordial thread and the exception was not handled.

71

There was a problem initializing the runtime system, for example insufficient memory to allocate critical tables.

For example, if the shell is sh:

 
$ gsi -:d0 -e "(pretty-print (expt 2 100))"
1267650600228229401496703205376
$ echo $?
0
$ gsi -:d0,unknown # try to use an unknown runtime option
$ echo $?
64
$ gsi -:d0 nonexistent.scm # try to load a file that does not exist
$ echo $?
70
$ gsi nonexistent.scm
*** ERROR IN ##main -- No such file or directory
(load "nonexistent.scm")
$ echo $?
70
 
$ gsi -:m4000000 # ask for a 4 gigabyte heap
*** malloc: vm_allocate(size=528384) failed (error code=3)
*** malloc[15068]: error: Can't allocate region
$ echo $?
71

Note the use of the runtime option ‘-:d0’ that prevents error messages from being output, and the runtime option ‘-:m4000000’ which sets the minimum heap size to 4 gigabytes.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.5 Scheme scripts

The load procedure treats specially files that begin with the two characters ‘#!’ and ‘@;’. Such files are called script files and the first line is called the script line. In addition to indicating that the file is a script, the script line provides information about the source code language to be used by the load procedure. After the two characters ‘#!’ and ‘@;’ the system will search for the first substring matching one of the following language specifying tokens:

scheme-r4rs

R4RS language with prefix syntax, case-insensitivity, keyword syntax not supported

scheme-r5rs

R5RS language with prefix syntax, case-insensitivity, keyword syntax not supported

scheme-ieee-1178-1990

IEEE 1178-1990 language with prefix syntax, case-insensitivity, keyword syntax not supported

scheme-srfi-0

R5RS language with prefix syntax and SRFI 0 support (i.e. cond-expand special form), case-insensitivity, keyword syntax not supported

gsi-script

Full Gambit Scheme language with prefix syntax, case-sensitivity, keyword syntax supported

gsc-script

Full Gambit Scheme language with prefix syntax, case-sensitivity, keyword syntax supported

six-script

Full Gambit Scheme language with infix syntax, case-sensitivity, keyword syntax supported

If a language specifying token is not found, load will use the same language as a nonscript file (i.e. it uses the file extension and runtime system options to determine the language).

After processing the script line, load will parse the rest of the file (using the syntax of the language indicated) and then execute it. When the file is being loaded because it is an argument on the interpreter’s command line, the interpreter will:


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.5.1 Scripts under UNIX and Mac OS X

Under UNIX and Mac OS X, the Gambit-C installation process creates the executable ‘gsi’ and also the executables ‘six’, ‘gsi-script’, ‘six-script’, ‘scheme-r5rs’, ‘scheme-srfi-0’, etc as links to ‘gsi’. A Scheme script need only start with the name of the desired Scheme language variant prefixed with ‘#!’ and the directory where the Gambit-C executables are stored. This script should be made executable by setting the execute permission bits (with a ‘chmod +x script’). Here is an example of a script which lists on standard output the files in the current directory:

 
#!/usr/local/Gambit-C/bin/gsi-script
(for-each pretty-print (directory-files))

Here is another UNIX script, using the Scheme infix syntax extension, which takes a single integer argument and prints on standard output the numbers from 1 to that integer:

 
#!/usr/local/Gambit-C/bin/six-script

void main (obj n_str)
{
  int n = \string->number(n_str);
  for (int i=1; i<=n; i++)
    \pretty-print(i);
}

For maximal portability it is a good idea to start scripts indirectly through the ‘/usr/bin/env’ program, so that the executable of the interpreter will be searched in the user’s ‘PATH’. This is what SRFI 22 recommends. For example here is a script that mimics the UNIX ‘cat’ utility for text files:

 
#!/usr/bin/env gsi-script

(define (display-file filename)
  (display (call-with-input-file filename
             (lambda (port)
               (read-line port #f)))))

(for-each display-file (cdr (command-line)))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.5.2 Scripts under Microsoft Windows

Under Microsoft Windows, the Gambit-C installation process creates the executable ‘gsi.exe’ and ‘six.exe’ and also the batch files ‘gsi-script.bat’, ‘six-script.bat’, ‘scheme-r5rs.bat’, ‘scheme-srfi-0.bat’, etc which simply invoke ‘gsi.exe’ with the same command line arguments. A Scheme script need only start with the name of the desired Scheme language variant prefixed with ‘@;’. A UNIX script can be converted to a Microsoft Windows script simply by changing the script line and storing the script in a file whose name has a ‘.bat’ or ‘.cmd’ extension:

 
@;gsi-script %~f0 %*
(display "files:\n")
(pretty-print (directory-files))

Note that Microsoft Windows always searches executables in the user’s ‘PATH’, so there is no need for an indirection such as the UNIX ‘/usr/bin/env’. However the script line must end with ‘%~f0 %*’ to pass the expanded filename of the script and command line arguments to the interpreter.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

2.5.3 Compiling scripts

A script file can be compiled using the Gambit Scheme compiler (see section The Gambit Scheme compiler) into a standalone executable. The script line will provide information to the compiler on which language to use. The script line also provides information on which runtime options to use when executing the compiled script. This is useful to set the default runtime options of an executable program.

The compiled script will be executed similarly to an interpreted script (i.e. the list of command line arguments returned by the command-line procedure and the invocation of the main procedure).

For example:

 
$ cat square.scm
#!/usr/local/Gambit-C/bin/gsi-script -:d0
(define (main arg)
  (pretty-print (expt (string->number arg) 2)))
$ gsi square 30        # gsi will load square.scm
900
$ gsc -exe square      # compile the script to a standalone program
$ ./square 30
900
$ ./square 1 2 3       # too many arguments to main
$ echo $?
70
$ ./square -:d1 1 2 3  # ask for error message
*** ERROR -- Wrong number of arguments passed to procedure
(main "1" "2" "3")

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3. The Gambit Scheme compiler

Synopsis:

 
gsc [-:runtimeoption,…] [-i] [-f] [-v]
    [-prelude expressions] [-postlude expressions]
    [-dynamic] [-exe] [-obj] [-cc-options options]
    [-ld-options-prelude options] [-ld-options options]
    [-warnings] [-verbose] [-report] [-expansion] [-gvm]
    [-debug] [-debug-location] [-debug-source]
    [-debug-environments] [-track-scheme]
    [-o output] [-c] [-keep-c] [-link] [-flat] [-l base]
    [[-] [-e expressions] [file]]

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.1 Interactive mode

When no command line argument is present other than options the compiler behaves like the interpreter in interactive mode. The only difference with the interpreter is that the compilation related procedures listed in this chapter are also available (i.e. compile-file, compile-file-to-target, etc).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.2 Customization

Like the interpreter, the compiler will examine the initialization file unless the ‘-f’ option is specified.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.3 Batch mode

In batch mode gsc takes a set of file names (with either no extension, or a C file extension, or some other extension) on the command line and compiles each Scheme file into a C file. The recognized C file extensions are ‘.c’, ‘.C’, ‘.cc’, ‘.cp’, ‘.cpp’, ‘.CPP’, ‘.cxx’, ‘.c++’, ‘.m’, ‘.M’, and ‘.mm’. The extension can be omitted from file when the Scheme file has a ‘.scm’ or ‘.six’ extension. When the extension of the Scheme file is ‘.six’ the content of the file will be parsed using the Scheme infix syntax extension (see Scheme infix syntax extension). Otherwise, gsc will parse the Scheme file using the normal Scheme prefix syntax. Files with a C file extension must have been previously produced by gsc, with the ‘-c’ option, and are used by Gambit’s linker.

For each Scheme file a C file ‘file.c’ will be produced. The C file’s name is the same as the Scheme file, but the extension is changed to ‘.c’. By default the C file is created in the same directory as the Scheme file. This default can be overridden with the compiler’s ‘-o’ option.

The C files produced by the compiler serve two purposes. They will be processed by a C compiler to generate object files, and they also contain information to be read by Gambit’s linker to generate a link file. The link file is a C file that collects various linking information for a group of modules, such as the set of all symbols and global variables used by the modules. The linker is only invoked when the ‘-link’ or ‘-exe’ options appear on the command line.

Compiler options must be specified before the first file name and after the ‘-:’ runtime option (see section Runtime options). If present, the ‘-i’, ‘-f’, and ‘-v’ compiler options must come first. The available options are:

-i

Force interpreter mode.

-f

Do not examine the initialization file.

-v

Print the system version string, system time stamp, operating system type, and configure script options on standard output and exit.

-prelude expressions

Add expressions to the top of the source code being compiled.

-postlude expressions

Add expressions to the bottom of the source code being compiled.

-cc-options options

Add options to the command that invokes the C compiler.

-ld-options-prelude options

Add options to the command that invokes the C linker.

-ld-options options

Add options to the command that invokes the C linker.

-warnings

Display warnings.

-verbose

Display a trace of the compiler’s activity.

-report

Display a global variable usage report.

-expansion

Display the source code after expansion.

-gvm

Generate a listing of the GVM code.

-debug

Include all debugging information in the code generated.

-debug-location

Include source code location debugging information in the code generated.

-debug-source

Include the source code debugging information in the code generated.

-debug-environments

Include environment debugging information in the code generated.

-track-scheme

Generate ‘#line’ directives referring back to the Scheme code.

-o output

Set name of output file or directory where output file(s) are written.

-dynamic

Compile Scheme source files to dynamically loadable object files (this is the default).

-exe

Compile Scheme source files into an executable program.

-obj

Compile Scheme source files to object files.

-keep-c

Keep any intermediate ‘.c’ files that are generated.

-c

Compile Scheme source files to C without generating link file.

-link

Compile Scheme source files to C and generate a link file.

-flat

Generate a flat link file instead of the default incremental link file.

-l base

Specify the link file of the base library to use for the link.

-

Start REPL interaction.

-e expressions

Evaluate expressions in the interaction environment.

The ‘-i’ option forces the compiler to process the remaining command line arguments like the interpreter.

The ‘-prelude’ option adds the specified expressions to the top of the source code being compiled. The main use of this option is to supply declarations on the command line. For example the following invocation of the compiler will compile the file ‘bench.scm’ in unsafe mode:

 
$ gsc -prelude "(declare (not safe))" bench.scm

The ‘-postlude’ option adds the specified expressions to the bottom of the source code being compiled. The main use of this option is to supply the expression that will start the execution of the program. For example:

 
$ gsc -postlude "(start-bench)" bench.scm

The ‘-cc-options’ option is only meaningful when a dynamically loadable object file is being generated (neither the ‘-c’ or ‘-link’ options are used). The ‘-cc-options’ option adds the specified options to the command that invokes the C compiler. The main use of this option is to specify the include path, some symbols to define or undefine, the optimization level, or any C compiler option that is different from the default. For example:

 
$ gsc -cc-options "-U___SINGLE_HOST -O2 -I../include" bench.scm

The ‘-ld-options-prelude’ and ‘-ld-options’ options are only meaningful when a dynamically loadable object file is being generated (neither the ‘-c’ or ‘-link’ options are used). The ‘-ld-options-prelude’ and ‘-ld-options’ options add the specified options to the command that invokes the C linker (the options in ld-options-prelude are passed to the C linker before the input file and the options in ld-options are passed after). The main use of this option is to specify additional object files or libraries that need to be linked, or any C linker option that is different from the default (such as the library search path and flags to select between static and dynamic linking). For example:

 
$ gsc -ld-options "-L/usr/X11R6/lib -lX11 -dynamic" bench.scm

The ‘-warnings’ option displays on standard output all warnings that the compiler may have.

The ‘-verbose’ option displays on standard output a trace of the compiler’s activity.

The ‘-report’ option displays on standard output a global variable usage report. Each global variable used in the program is listed with 4 flags that indicate whether the global variable is defined, referenced, mutated and called.

The ‘-expansion’ option displays on standard output the source code after expansion and inlining by the front end.

The ‘-gvm’ option generates a listing of the intermediate code for the “Gambit Virtual Machine” (GVM) of each Scheme file on ‘file.gvm’.

The ‘-debug’ option causes all kinds of debugging information to be saved in the code generated. See the documentation of the ‘debug’ declaration for details.

The ‘-debug-location’ option causes source code location debugging information to be saved in the code generated. See the documentation of the ‘debug-location’ declaration for details.

The ‘-debug-source’ option causes source code debugging information to be saved in the code generated. See the documentation of the ‘debug-source’ declaration for details.

The ‘-debug-environments’ option causes environment debugging information to be saved in the code generated. See the documentation of the ‘debug-environments’ declaration for details.

The ‘-track-scheme’ options causes the generation of ‘#line’ directives that refer back to the Scheme source code. This allows the use of a C debugger or profiler to debug Scheme code.

The ‘-o’ option sets the filename of the output file, or the directory in which the output file(s) generated by the compiler are written.

If the ‘-link’ or ‘-exe’ options appear on the command line, the Gambit linker is invoked to generate the link file from the set of C files specified on the command line or produced by the Gambit compiler. By default the link file is ‘last_.c’, where ‘last.c’ is the last file in the set of C files. When the ‘-c’ option is specified, the Scheme source files are compiled to C files. When the ‘-exe’ option is specified, the generated C files and link file are compiled and linked using the C compiler to produce an executable program whose name defaults to ‘last.exe’. When the ‘-obj’ option is specified, the generated C files are compiled using the C compiler to produce object files (‘.o’ or ‘.obj’ extensions). If neither the ‘-link’, ‘-c’, ‘-exe’, ‘-obj’ options appear on the command line, the Scheme source files are compiled to dynamically loadable object files (‘.on’ extension). The ‘-keep-c’ option will prevent the deletion of any intermediate ‘.c’ file that is generated. Note that in this case the intermediate ‘.c’ file will be generated in the same directory as the Scheme source file even if the ‘-o’ option is used.

The ‘-flat’ option is only meaningful when a link file is being generated (i.e. the ‘-link’ or ‘-exe’ options also appear on the command line). The ‘-flat’ option directs the Gambit linker to generate a flat link file. By default, the linker generates an incremental link file (see the next section for a description of the two types of link files).

The ‘-l’ option is only meaningful when an incremental link file is being generated (i.e. the ‘-link’ or ‘-exe’ options appear on the command line and the ‘-flat’ option is absent). The ‘-l’ option specifies the link file (without the ‘.c’ extension) of the base library to use for the incremental link. By default the link file of the Gambit runtime library is used (i.e. ‘~~lib/_gambc.c’).

The ‘-’ option starts a REPL interaction.

The ‘-e’ option evaluates the specified expressions in the interaction environment.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.4 Link files

Gambit can be used to create programs and libraries of Scheme modules. This section explains the steps required to do so and the role played by the link files.

In general, a program is composed of a set of Scheme modules and C modules. Some of the modules are part of the Gambit runtime library and the other modules are supplied by the user. When the program is started it must setup various global tables (including the symbol table and the global variable table) and then sequentially execute the Scheme modules (more or less as though they were being loaded one after another). The information required for this is contained in one or more link files generated by the Gambit linker from the C files produced by the Gambit compiler.

The order of execution of the Scheme modules corresponds to the order of the modules on the command line which produced the link file. The order is usually important because most modules define variables and procedures which are used by other modules (for this reason the program’s main computation is normally started by the last module).

When a single link file is used to contain the linking information of all the Scheme modules it is called a flat link file. Thus a program built with a flat link file contains in its link file both information on the user modules and on the runtime library. This is fine if the program is to be statically linked but is wasteful in a shared-library context because the linking information of the runtime library can’t be shared and will be duplicated in all programs (this linking information typically takes hundreds of kilobytes).

Flat link files are mainly useful to bundle multiple Scheme modules to make a runtime library (such as the Gambit runtime library) or to make a single file that can be loaded with the load procedure.

An incremental link file contains only the linking information that is not already contained in a second link file (the “base” link file). Assuming that a flat link file was produced when the runtime library was linked, a program can be built by linking the user modules with the runtime library’s link file, producing an incremental link file. This allows the creation of a shared-library which contains the modules of the runtime library and its flat link file. The program is dynamically linked with this shared-library and only contains the user modules and the incremental link file. For small programs this approach greatly reduces the size of the program because the incremental link file is small. A “hello world” program built this way can be as small as 5 Kbytes. Note that it is perfectly fine to use an incremental link file for statically linked programs (there is very little loss compared to a single flat link file).

Incremental link files may be built from other incremental link files. This allows the creation of shared-libraries which extend the functionality of the Gambit runtime library.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.4.1 Building an executable program

The simplest way to create an executable program is to invoke gsc with the ‘-exe’ option. The compiler will transparently perform all the steps necessary, including compiling Scheme source files to C files, generating the link file, compiling the C files generated to object files, and creating the final executable file using the C linker. The following example shows how to build the executable program ‘hello.exe’ which contains the two Scheme modules ‘h.scm’ and ‘w.six’.

 
$ cat h.scm
(display "hello") (newline)
$ cat w.six
display("world"); newline();
$ gsc -o hello.exe -exe h.scm w.six
h.scm:
/Users/feeley/gambit/doc/h.c:
w.six:
/Users/feeley/gambit/doc/w.c:
/Users/feeley/gambit/doc/w_.c:
$ ./hello.exe
hello
world

The detailed steps which are performed can be viewed by setting the ‘GAMBC_CC_VERBOSE’ environment variable to a nonnull value. For example:

 
$ export GAMBC_CC_VERBOSE=yes
$ gsc -o hello.exe -exe h.scm w.six
h.scm:
/Users/feeley/gambit/doc/h.c:
gcc -no-cpp-precomp -Wno-unused -O1 -fno-math-errno -fschedule-insns2
 -fno-trapping-math -fno-strict-aliasing -fwrapv -fomit-frame-pointer
 -fPIC -fno-common -mieee-fp -I"/usr/local/Gambit-C/include" -c -o "h.o" h.c
w.six:
/Users/feeley/gambit/doc/w.c:
gcc -no-cpp-precomp -Wno-unused -O1 -fno-math-errno -fschedule-insns2
 -fno-trapping-math -fno-strict-aliasing -fwrapv -fomit-frame-pointer
 -fPIC -fno-common -mieee-fp -I"/usr/local/Gambit-C/include" -c -o "w.o" w.c
/Users/feeley/gambit/doc/w_.c:
gcc -no-cpp-precomp -Wno-unused -O1 -fno-math-errno -fschedule-insns2
 -fno-trapping-math -fno-strict-aliasing -fwrapv -fomit-frame-pointer
 -fPIC -fno-common -mieee-fp -I"/usr/local/Gambit-C/include" -c -o "w_.o" w_.c
gcc  -no-cpp-precomp -Wno-unused -O1 -fno-math-errno -fschedule-insns2
 -fno-trapping-math -fno-strict-aliasing -fwrapv -fomit-frame-pointer
 -fPIC -fno-common -mieee-fp -I"/usr/local/Gambit-C/include"
 -o "hello.exe" h.o w.o w_.o "/usr/local/Gambit-C/lib/libgambc.a"

Using a single invocation of gsc with the ‘-exe’ option is sometimes inappropriate when the build process is more complex, for example when the program is composed of several seperately compiled modules. In such a case it is useful to decompose the build process into smaller compilation steps. The ‘hello.exe’ executable program could have been built by seperating the generation of C files from the C compilation and linking:

 
$ gsc -c h.scm
$ gsc -c w.six
$ gsc -o hello.exe -exe h.c w.c

When even finer control is desired the build process can be decomposed into smaller steps that invoke the C compiler and linker explicitly. This is described in the rest of this section.

The gsc compiler can be invoked to compile each Scheme module into a C file and to create an incremental link file. The C files and the link file must then be compiled with a C compiler and linked (at the object file level) with the Gambit runtime library and possibly other libraries (such as the math library and the dynamic loading library).

Here is for example how a program with three modules (one in C and two in Scheme) can be built. The content of the three source files (‘m1.c’, ‘m2.scm’ and ‘m3.scm’) is:

 
/* File: "m1.c" */
int power_of_2 (int x) { return 1<<x; }

; File: "m2.scm"
(c-declare "extern int power_of_2 ();")
(define pow2 (c-lambda (int) int "power_of_2"))
(define (twice x) (cons x x))

; File: "m3.scm"
(write (map twice (map pow2 '(1 2 3 4)))) (newline)

The compilation of the two Scheme source files can be done with three invocations of gsc:

 
$ gsc -c m2.scm        # create m2.c (note: .scm is optional)
$ gsc -c m3.scm        # create m3.c (note: .scm is optional)
$ gsc -link m2.c m3.c  # create the incremental link file m3_.c

Alternatively, the three invocations of gsc can be replaced by a single invocation:

 
$ gsc -link m2 m3
m2:
m3:

At this point there will be 4 C files: ‘m1.c’, ‘m2.c’, ‘m3.c’, and ‘m3_.c’. To produce an executable program these files must be compiled with a C compiler and linked with the Gambit-C runtime library. The C compiler options needed will depend on the C compiler and the operating system (in particular it may be necessary to add the options ‘-I/usr/local/Gambit-C/include -L/usr/local/Gambit-C/lib’ to access the ‘gambit.h’ header file and the Gambit-C runtime library).

Here is an example under Mac OS X:

 
$ uname -srmp
Darwin 8.1.0 Power Macintosh powerpc
$ gsc -obj m1.c m2.c m3.c m3_.c
m1.c:
m2.c:
m3.c:
m3_.c:
$ gcc m1.o m2.o m3.o m3_.o -lgambc
$ ./a.out
((2 . 2) (4 . 4) (8 . 8) (16 . 16))

Here is an example under Linux:

 
$ uname -srmp
Linux 2.6.8-1.521 i686 athlon
$ gsc -obj m1.c m2.c m3.c m3_.c
m1.c:
m2.c:
m3.c:
m3_.c:
$ gcc m1.o m2.o m3.o m3_.o -lgambc -lm -ldl -lutil
$ ./a.out
((2 . 2) (4 . 4) (8 . 8) (16 . 16))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.4.2 Building a loadable library

To bundle multiple modules into a single object file that can be dynamically loaded with the load procedure, a flat link file is needed. The compiler’s ‘-o’ option must be used to name the C file generated as follows. If the dynamically loadable object file is to be named ‘myfile.on’ then the ‘-o’ option must set the name of the link file generated to ‘myfile.on.c’ (note that the ‘.c’ extension could also be ‘.cc’, ‘.cpp’ or whatever extension is appropriate for C/C++ source files). The three modules of the previous example can be bundled by generating a link file in this way:

 
$ gsc -link -flat -o foo.o1.c m2 m3
m2:
m3:
*** WARNING -- "cons" is not defined,
***            referenced in: ("m2.c")
*** WARNING -- "map" is not defined,
***            referenced in: ("m3.c")
*** WARNING -- "newline" is not defined,
***            referenced in: ("m3.c")
*** WARNING -- "write" is not defined,
***            referenced in: ("m3.c")

The warnings indicate that there are no definitions (defines or set!s) of the variables cons, map, newline and write in the set of modules being linked. Before ‘foo.o1’ is loaded, these variables will have to be bound; either implicitly (by the runtime library) or explicitly.

When compiling the C files and link file generated, the flag ‘-D___DYNAMIC’ must be passed to the C compiler and the C compiler and linker must be told to generate a dynamically loadable shared library.

Here is an example under Mac OS X:

 
$ uname -srmp
Darwin 10.5.0 i386 i386
$ gsc -link -flat -o foo.o1.c m2 m3 > /dev/null
m2:
m3:
$ gsc -cc-options "-D___DYNAMIC" -obj m1.c m2.c m3.c foo.o1.c
m1.c:
m2.c:
m3.c:
foo.o1.c:
$ gcc -bundle m1.o m2.o m3.o foo.o1.o -o foo.o1
$ gsi foo.o1
((2 . 2) (4 . 4) (8 . 8) (16 . 16))

Here is an example under Linux:

 
$ uname -srmp
Linux 2.6.8-1.521 i686 athlon
$ gsc -link -flat -o foo.o1.c m2 m3 > /dev/null
m2:
m3:
$ gsc -cc-options "-D___DYNAMIC" -obj m1.c m2.c m3.c foo.o1.c
m1.c:
m2.c:
m3.c:
foo.o1.c:
$ gcc -shared m1.o m2.o m3.o foo.o1.o -o foo.o1
$ gsi foo.o1
((2 . 2) (4 . 4) (8 . 8) (16 . 16))

Here is a more complex example, under Solaris, which shows how to build a loadable library ‘mymod.o1’ composed of the files ‘m4.scm’, ‘m5.scm’ and ‘x.c’ that links to system shared libraries (for X-windows):

 
$ uname -srmp
SunOS ungava 5.6 Generic_105181-05 sun4m sparc SUNW,SPARCstation-20
$ gsc -link -flat -o mymod.o1.c m4 m5
m4:
m5:
*** WARNING -- "*" is not defined,
***            referenced in: ("m4.c")
*** WARNING -- "+" is not defined,
***            referenced in: ("m5.c")
*** WARNING -- "display" is not defined,
***            referenced in: ("m5.c" "m4.c")
*** WARNING -- "newline" is not defined,
***            referenced in: ("m5.c" "m4.c")
*** WARNING -- "write" is not defined,
***            referenced in: ("m5.c")
$ gsc -cc-options "-D___DYNAMIC" -obj m4.c m5.c x.c mymod.o1.c
m4.c:
m5.c:
x.c:
mymod.o1.c:
$ /usr/ccs/bin/ld -G -o mymod.o1 mymod.o1.o m4.o m5.o x.o -lX11 -lsocket
$ gsi mymod.o1
hello from m4
hello from m5
(f1 10) = 22
$ cat m4.scm
(define (f1 x) (* 2 (f2 x)))
(display "hello from m4")
(newline)

(c-declare #<<c-declare-end
#include "x.h"
c-declare-end
)
(define x-initialize (c-lambda (char-string) bool "x_initialize"))
(define x-display-name (c-lambda () char-string "x_display_name"))
(define x-bell (c-lambda (int) void "x_bell"))
$ cat m5.scm
(define (f2 x) (+ x 1))
(display "hello from m5")
(newline)

(display "(f1 10) = ")
(write (f1 10))
(newline)

(x-initialize (x-display-name))
(x-bell 50) ; sound the bell at 50%
$ cat x.c
#include <X11/Xlib.h>

static Display *display;

int x_initialize (char *display_name)
{
  display = XOpenDisplay (display_name);
  return display != NULL;
}

char *x_display_name (void)
{
  return XDisplayName (NULL);
}

void x_bell (int volume)
{
  XBell (display, volume);
  XFlush (display);
}
$ cat x.h
int x_initialize (char *display_name);
char *x_display_name (void);
void x_bell (int);

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.4.3 Building a shared-library

A shared-library can be built using an incremental link file or a flat link file. An incremental link file is normally used when the Gambit runtime library (or some other library) is to be extended with new procedures. A flat link file is mainly useful when building a “primal” runtime library, which is a library (such as the Gambit runtime library) that does not extend another library. When compiling the C files and link file generated, the flags ‘-D___LIBRARY’ and ‘-D___SHARED’ must be passed to the C compiler. The flag ‘-D___PRIMAL’ must also be passed to the C compiler when a primal library is being built.

A shared-library ‘mylib.so’ containing the two first modules of the previous example can be built this way:

 
$ uname -srmp
Linux bailey 1.2.13 #2 Wed Aug 28 16:29:41 GMT 1996 i586
$ gsc -link -o mylib.c m2
$ gsc -obj -cc-options "-D___SHARED" m1.c m2.c mylib.c
m1.c:
m2.c:
mylib.c:
$ gcc -shared  m1.o m2.o mylib.o -o mylib.so

Note that this shared-library is built using an incremental link file (it extends the Gambit runtime library with the procedures pow2 and twice). This shared-library can in turn be used to build an executable program from the third module of the previous example:

 
$ gsc -link -l mylib m3
$ gsc -obj m3.c m3_.c
m3.c:
m3_.c:
$ gcc m3.o m3_.o mylib.so -lgambc
$ LD_LIBRARY_PATH=.:/usr/local/lib ./a.out
((2 . 2) (4 . 4) (8 . 8) (16 . 16))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.4.4 Other compilation options

The performance of the code can be increased by passing the ‘-D___SINGLE_HOST’ flag to the C compiler. This will merge all the procedures of a module into a single C procedure, which reduces the cost of intra-module procedure calls. In addition the ‘-O’ option can be passed to the C compiler. For large modules, it will not be practical to specify both ‘-O’ and ‘-D___SINGLE_HOST’ for typical C compilers because the compile time will be high and the C compiler might even fail to compile the program for lack of memory. It has been observed that lower levels of optimization (e.g. ‘-O1’) often give faster compilation and also generate faster code. It is a good idea to experiment.

Normally C compilers will not automatically search ‘/usr/local/Gambit-C/include’ for header files so the flag ‘-I/usr/local/Gambit-C/include’ should be passed to the C compiler. Similarly, C compilers/linkers will not automatically search ‘/usr/local/Gambit-C/lib’ for libraries so the flag ‘-L/usr/local/Gambit-C/lib’ should be passed to the C compiler/linker. Alternatives are given in Accessing the system files.

A variety of flags are needed by some C compilers when compiling a shared-library or a dynamically loadable library. Some of these flags are: ‘-shared’, ‘-call_shared’, ‘-rdynamic’, ‘-fpic’, ‘-fPIC’, ‘-Kpic’, ‘-KPIC’, ‘-pic’, ‘+z’, ‘-G’. Check your compiler’s documentation to see which flag you need.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

3.5 Procedures specific to compiler

The Gambit Scheme compiler features the following procedures that are not available in the Gambit Scheme interpreter.

(compile-file-to-target file [options: options] [output: output] [module-name: module-name])procedure

The file parameter must be a string naming an existing file containing Scheme source code. The extension can be omitted from file when the Scheme file has a ‘.scm’ or ‘.six’ extension. This procedure compiles the source file into a file containing C code. By default, this file is named after file with the extension replaced with ‘.c’. The name of the generated file can be specified with the output parameter. If output is a string naming a directory then the C file is created in that directory. Otherwise the name of the C file is output. The name of the generated module can be specified with the module-name parameter. If module-name is #f or is not specified, then the name of the module is derived from the name of the C file generated, without the extension.

Compilation options are specified through the options parameter which must be a list of symbols. Any combination of the following options can be used: ‘verbose’, ‘report’, ‘expansion’, ‘gvm’, and ‘debug’.

When the compilation is successful, compile-file-to-target returns the name of the C file generated. When there is a compilation error, #f is returned.

 
$ cat h.scm
(display "hello") (newline)
$ gsc
Gambit v4.6.6

> (compile-file-to-target "h")
"/Users/feeley/gambit/doc/h.c"
(compile-file file [options: options] [output: output] [cc-options: cc-options] [ld-options-prelude: ld-options-prelude] [ld-options: ld-options])procedure

The file, options, and output parameters have the same meaning as for the compile-file-to-target procedure, except that file may be a Scheme source file or a C file possibly generated by the Gambit Scheme compiler (for example with the compile-file-to-target procedure). The cc-options parameter is a string containing the options to pass to the C compiler and the ld-options-prelude and ld-options parameters are strings containing the options to pass to the C linker (the options in ld-options-prelude are passed to the C linker before the input file and the options in ld-options are passed after).

The compile-file procedure compiles the source file file into an object file, which is either a file dynamically loadable using the load procedure, or a C linkable object file destined to be linked with the C linker (for example to create a standalone executable program). The presence of the obj option in options will cause the creation of a C linkable object file and therefore the options ld-options-prelude and ld-options are ignored, otherwise a dynamically loadable file is created. In both cases, if file is a Scheme source file, the compiler first compiles file to a C file which is created in the same directory as file regardless of the output parameter. Then the C file is compiled with the C compiler.

When the compilation is successful, compile-file returns the name of the object file generated. When there is a compilation error, #f is returned.

The name of the object file can be specified with the output parameter. If output is a string naming a directory then the object file is created in that directory. Otherwise the name of the object file is output.

In the case of a dynamically loadable object file, by default the object file is named after file with the extension replaced with ‘.on’, where n is a positive integer that acts as a version number. The next available version number is generated automatically by compile-file.

When dynamically loaded object files are loaded using the load procedure, the ‘.on’ extension can be specified (to select a particular version) or omitted (to load the file with a ‘.on’ extension with the highest n consecutively from 1). When the ‘.on’ extension is not specified and older versions are no longer needed, all versions must be deleted and the compilation must be repeated (this is necessary because the file name, including the extension, is used to name some of the exported symbols of the object file).

Note that dynamically loadable object files can only be generated on host operating systems that support dynamic loading.

 
$ cat h.scm
(display "hello") (newline)
$ gsc
Gambit v4.6.6

> (compile-file "h")
"/Users/feeley/gambit/doc/h.o1"
> (load "h")
hello
"/Users/feeley/gambit/doc/h.o1"
> (compile-file-to-target "h" output: "h.o99.c")
"/Users/feeley/gambit/doc/h.o99.c"
> (compile-file "h.o99.c")
"/Users/feeley/gambit/doc/h.o99"
> (load "h.o99")
hello
"/Users/feeley/gambit/doc/h.o99"
> (compile-file-to-target "h")
"/Users/feeley/gambit/doc/h.c"
> (compile-file "h.c" options: '(obj))
"/Users/feeley/gambit/doc/h.o"
(link-incremental module-list [output: output] [base: base] [warnings?: warnings?])procedure

The first parameter must be a non empty list of strings naming Scheme modules to link (the file extension may be omitted). An incremental link file is generated for the modules specified in module-list. By default the link file generated is named ‘last_.c’, where last is the name of the last module, without the file extension. The name of the generated link file can be specified with the output parameter. If output is a string naming a directory then the link file is created in that directory. Otherwise the name of the link file is output.

The base link file is specified by the base parameter, which must be a string. By default the base link file is the Gambit runtime library link file ‘~~lib/_gambc.c’. However, when base is supplied it is the name of the base link file (the file extension may be omitted).

The warnings? parameter controls whether warnings are generated for undefined references.

The following example shows how to build the executable program ‘hello’ which contains the two Scheme modules ‘h.scm’ and ‘w.six’.

 
$ uname -srmp
Darwin 8.1.0 Power Macintosh powerpc
$ cat h.scm
(display "hello") (newline)
$ cat w.six
display("world"); newline();
$ gsc
Gambit v4.6.6

> (compile-file-to-target "h")
"/Users/feeley/gambit/doc/h.c"
> (compile-file-to-target "w")
"/Users/feeley/gambit/doc/w.c"
> (link-incremental '("h" "w") output: "hello.c")
"/Users/feeley/gambit/doc/hello_.c"
> ,q
$ gsc -obj h.c w.c hello.c
h.c:
w.c:
hello.c:
$ gcc h.o w.o hello.o -lgambc -o hello
$ ./hello
hello
world
(link-flat module-list [output: output] [warnings?: warnings?])procedure

The first parameter must be a non empty list of strings naming Scheme modules to link (the file extension may be omitted). The first string must be the name of a Scheme module or the name of a link file and the remaining strings must name Scheme modules. A flat link file is generated for the modules specified in module-list. By default the link file generated is named ‘last_.c’, where last is the name of the last module. The name of the generated link file can be specified with the output parameter. If output is a string naming a directory then the link file is created in that directory. Otherwise the name of the link file is output. If a dynamically loadable object file is produced from the link file ‘output’, then the name of the dynamically loadable object file must be ‘output’ stripped of its file extension.

The warnings? parameter controls whether warnings are generated for undefined references.

The following example shows how to build the dynamically loadable object file ‘lib.o1’ which contains the two Scheme modules ‘m6.scm’ and ‘m7.scm’.

 
$ uname -srmp
Darwin 8.1.0 Power Macintosh powerpc
$ cat m6.scm
(define (f x) (g (* x x)))
$ cat m7.scm
(define (g y) (+ n y))
$ gsc
Gambit v4.6.6

> (compile-file-to-target "m6")
"/Users/feeley/gambit/doc/m6.c"
> (compile-file-to-target "m7")
"/Users/feeley/gambit/doc/m7.c"
> (link-flat '("m6" "m7") output: "lib.o1.c")
*** WARNING -- "*" is not defined,
***            referenced in: ("m6.c")
*** WARNING -- "+" is not defined,
***            referenced in: ("m7.c")
*** WARNING -- "n" is not defined,
***            referenced in: ("m7.c")
"/Users/feeley/gambit/doc/lib.o1.c"
> ,q
$ gcc -bundle -D___DYNAMIC m6.c m7.c lib.o1.c -o lib.o1
$ gsc
Gambit v4.6.6

> (load "lib")
*** WARNING -- Variable "n" used in module "m7" is undefined
"/Users/feeley/gambit/doc/lib.o1"
> (define n 10)
> (f 5)
35
> ,q

The warnings indicate that there are no definitions (defines or set!s) of the variables *, + and n in the modules contained in the library. Before the library is used, these variables will have to be bound; either implicitly (by the runtime library) or explicitly.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

4. Runtime options

Both gsi and gsc as well as executable programs compiled and linked using gsc take a ‘-:’ option which supplies parameters to the runtime system. This option must appear first on the command line. The colon is followed by a comma separated list of options with no intervening spaces. The available options are:

mHEAPSIZE

Set minimum heap size in kilobytes.

hHEAPSIZE

Set maximum heap size in kilobytes.

lLIVEPERCENT

Set heap occupation after garbage collection.

s

Select standard Scheme mode.

S

Select Gambit Scheme mode.

d[OPT...]

Set debugging options.

@[INTF][:PORT]

Override the configuration of the main RPC server.

=DIRECTORY

Override the central installation directory.

~~DIR=DIRECTORY

Override the DIR installation directory.

+ARGUMENT

Add ARGUMENT to the command line before other arguments.

f[OPT...]

Set file options.

t[OPT...]

Set terminal options.

-[OPT...]

Set standard input and output options.

The ‘m’ option specifies the minimum size of the heap. The ‘m’ is immediately followed by an integer indicating the number of kilobytes of memory. The heap will not shrink lower than this size. By default, the minimum size is 0.

The ‘h’ option specifies the maximum size of the heap. The ‘h’ is immediately followed by an integer indicating the number of kilobytes of memory. The heap will not grow larger than this size. By default, there is no limit (i.e. the heap will grow until the virtual memory is exhausted).

The ‘l’ option specifies the percentage of the heap that will be occupied with live objects after the heap is resized at the end of a garbage collection. The ‘l’ is immediately followed by an integer between 1 and 100 inclusively indicating the desired percentage. The garbage collector resizes the heap to reach this percentage occupation. By default, the percentage is 50.

The ‘s’ option selects standard Scheme mode. In this mode the reader is case-insensitive and keywords are not recognized. The ‘S’ option selects Gambit Scheme mode (the reader is case-sensitive and recognizes keywords which end with a colon). By default Gambit Scheme mode is used.

The ‘d’ option sets various debugging options. The letter ‘d’ is followed by a sequence of letters indicating suboptions.

p

Uncaught exceptions will be treated as “errors” in the primordial thread only.

a

Uncaught exceptions will be treated as “errors” in all threads.

r

When an “error” occurs a new REPL will be started.

s

When an “error” occurs a new REPL will be started. Moreover the program starts in single-stepping mode.

q

When an “error” occurs the program will terminate with a nonzero exit status.

R

When a user interrupt occurs a new REPL will be started. User interrupts are typically obtained by typing <^C>. Note that with some system configurations <^C> abruptly terminates the process. For example, under Microsoft Windows, <^C> works fine with the standard console but with the MSYS terminal window it terminates the process.

D

When a user interrupt occurs it will be deferred until the parameter current-user-interrupt-handler is bound.

Q

When a user interrupt occurs the program will terminate with a nonzero exit status.

LEVEL

The verbosity level is set to LEVEL (a digit from 0 to 9). At level 0 the runtime system will not display error messages and warnings.

i

The REPL interaction channel will be the IDE REPL window (if the IDE is available).

c

The REPL interaction channel will be the console.

-

The REPL interaction channel will be standard input and standard output.

@[HOST][:PORT]

The REPL interaction channel will be connected to the remote debugger at address HOST:PORT (if there is a remote debugger at that address). The default HOST is 127.0.0.1 and the default PORT is 44555. THIS OPTION IS NOT YET IMPLEMENTED!

The default debugging options are equivalent to -:dpqQ1i (i.e. an uncaught exception in the primordial thread terminates the program after displaying an error message). When the letter ‘d’ is not followed by suboptions, it is equivalent to -:dprR1i (i.e. a new REPL is started only when an uncaught exception occurs in the primordial thread). When gsi and gsc are running the main REPL, the debugging options are changed to cause errors in the primordial thread and user interrupts to start a nested REPL.

The ‘@[INTF][:PORT]’ option overrides the configuration of the main RPC server. The default INTF is 127.0.0.1 and the default PORT is 44556. THIS OPTION IS NOT YET IMPLEMENTED!

The ‘=DIRECTORY’ option overrides the setting of the central installation directory.

The ‘~~DIR=DIRECTORY’ option overrides the setting of the DIR installation directory.

The ‘+’ option adds the text that follows to the command line before other arguments.

The ‘f’, ‘t’ and ‘-’ options specify the default settings of the ports created for files, terminals and standard input and output respectively. The default character encoding, end-of-line encoding and buffering can be set. Moreover, for terminals the line-editing feature can be enabled or disabled. The ‘f’, ‘t’ and ‘-’ must be followed by a sequence of these options:

A

ASCII character encoding.

1

ISO-8859-1 character encoding.

2

UCS-2 character encoding.

4

UCS-4 character encoding.

6

UTF-16 character encoding.

8

UTF-8 character encoding.

U

UTF character encoding with fallback to UTF-8 on input if no BOM is present.

UA

UTF character encoding with fallback to ASCII on input if no BOM is present.

U1

UTF character encoding with fallback to ISO-8859-1 on input if no BOM is present.

U6

UTF character encoding with fallback to UTF-16 on input if no BOM is present.

U8

UTF character encoding with fallback to UTF-8 on input if no BOM is present.

c

End-of-line is encoded as CR (carriage-return).

l

End-of-line is encoded as LF (linefeed)

cl

End-of-line is encoded as CR-LF.

u

Unbuffered I/O.

n

Line buffered I/O (‘n’ for “at newline”).

f

Fully buffered I/O.

r

Illegal character encoding is treated as an error (exception raised).

R

Silently replace illegal character encodings with Unicode character #xfffd (replacement character).

e

Enable line-editing (applies to terminals only).

E

Disable line-editing (applies to terminals only).

When a program’s execution starts, the runtime system obtains the runtime options by processing in turn four sources of runtime options: the defaults, the environment variable ‘GAMBCOPT’, the script line of the source code, and the first command line argument of the program. Any runtime option can be overriden by a subsequent source of runtime options. It is sometimes useful to prevent overriding the runtime options of the script line. This can be achieved by starting the script line runtime options with ‘-::’. In this case the environment variable ‘GAMBCOPT’ is ignored, and the first command line argument of the program is not used for runtime options (it is treated like a normal command line argument).

For example:

 
$ GAMBCOPT=d0,=~/my-gambit2
$ export GAMBCOPT
$ gsi -e '(pretty-print (path-expand "~~")) (/ 1 0)'
"/Users/feeley/my-gambit2/"
$ echo $?
70
$ gsi -:d1 -e '(pretty-print (path-expand "~~")) (/ 1 0)'
"/Users/feeley/my-gambit2/"
*** ERROR IN (string)@1.3 -- Divide by zero
(/ 1 0)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5. Debugging


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.1 Debugging model

The evaluation of an expression may stop before it is completed for the following reasons:

  1. An evaluation error has occured, such as attempting to divide by zero.
  2. The user has interrupted the evaluation (usually by typing <^C>).
  3. A breakpoint has been reached or (step) was evaluated.
  4. Single-stepping mode is enabled.

When an evaluation stops, a message is displayed indicating the reason and location where the evaluation was stopped. The location information includes, if known, the name of the procedure where the evaluation was stopped and the source code location in the format ‘stream@line.column’, where stream is either a string naming a file or a symbol within parentheses, such as ‘(console)’.

A nested REPL is then initiated in the context of the point of execution where the evaluation was stopped. The nested REPL’s continuation and evaluation environment are the same as the point where the evaluation was stopped. For example when evaluating the expression ‘(let ((y (- 1 1))) (* (/ x y) 2))’, a “divide by zero” error is reported and the nested REPL’s continuation is the one that takes the result and multiplies it by two. The REPL’s lexical environment includes the lexical variable ‘y’. This allows the inspection of the evaluation context (i.e. the lexical and dynamic environments and continuation), which is particularly useful to determine the exact location and cause of an error.

The prompt of nested REPLs includes the nesting level; ‘1>’ is the prompt at the first nesting level, ‘2>’ at the second nesting level, and so on. An end of file (usually <^D>) will cause the current REPL to be terminated and the enclosing REPL (one nesting level less) to be resumed.

At any time the user can examine the frames in the REPL’s continuation, which is useful to determine which chain of procedure calls lead to an error. A backtrace that lists the chain of active continuation frames in the REPL’s continuation can be obtained with the ‘,b’ command. The frames are numbered from 0, that is frame 0 is the most recent frame of the continuation where execution stopped, frame 1 is the parent frame of frame 0, and so on. It is also possible to move the REPL to a specific parent continuation (i.e. a specific frame of the continuation where execution stopped) with the ‘,N’, ‘,N+’, ‘,N-’, ‘,+’, ‘,-’, ‘,++’, and ‘,--’ commands. When the frame number of the frame being examined is not zero, it is shown in the prompt after the nesting level, for example ‘1\5>’ is the prompt when the REPL nesting level is 1 and the frame number is 5.

Expressions entered at a nested REPL are evaluated in the environment (both lexical and dynamic) of the continuation frame currently being examined if that frame was created by interpreted Scheme code. If the frame was created by compiled Scheme code then expressions get evaluated in the global interaction environment. This feature may be used in interpreted code to fetch the value of a variable in the current frame or to change its value with set!. Note that some special forms (define in particular) can only be evaluated in the global interaction environment.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.2 Debugging commands

In addition to expressions, the REPL accepts the following special “comma” commands:

,?

Give a summary of the REPL commands.

,(h subject)

This command will show the section of the Gambit manual with the definition of the procedure or special form subject, which must be a symbol. For example ‘,(h time)’ will show the section documenting the time special form. Please see the help procedure for additional information.

,h

This command will show the section of the Gambit manual with the definition of the procedure which raised the exception for which this REPL was started.

,q

Terminate the process with exit status 0. This is equivalent to calling (exit 0).

,qt

Terminate the current thread (note that terminating the primordial thread terminates the process).

,t

Return to the outermost REPL, also known as the “top-level REPL”.

,d

Leave the current REPL and resume the enclosing REPL. This command does nothing in the top-level REPL.

,(c expr)

Leave the current REPL and continue the computation that initiated the REPL with a specific value. This command can only be used to continue a computation that signaled an error. The expression expr is evaluated in the current context and the resulting value is returned as the value of the expression which signaled the error. For example, if the evaluation of the expression ‘(* (/ x y) 2)’ signaled an error because ‘y’ is zero, then in the nested REPL a ‘,(c (+ 4 y))’ will resume the computation of ‘(* (/ x y) 2)’ as though the value of ‘(/ x y)’ was 4. This command must be used carefully because the context where the error occured may rely on the result being of a particular type. For instance a ‘,(c #f)’ in the previous example will cause ‘*’ to signal a type error (this problem is the most troublesome when debugging Scheme code that was compiled with type checking turned off so be careful).

,c

Leave the current REPL and continue the computation that initiated the REPL. This command can only be used to continue a computation that was stopped due to a user interrupt, breakpoint or a single-step.

,s

Leave the current REPL and continue the computation that initiated the REPL in single-stepping mode. The computation will perform an evaluation step (as defined by step-level-set!) and then stop, causing a nested REPL to be entered. Just before the evaluation step is performed, a line is displayed (in the same format as trace) which indicates the expression that is being evaluated. If the evaluation step produces a result, the result is also displayed on another line. A nested REPL is then entered after displaying a message which describes the next step of the computation. This command can only be used to continue a computation that was stopped due to a user interrupt, breakpoint or a single-step.

,l

This command is similar to ‘,s’ except that it “leaps” over procedure calls, that is procedure calls are treated like a single step. Single-stepping mode will resume when the procedure call returns, or if and when the execution of the called procedure encounters a breakpoint.

,N

Move to frame number N of the continuation. After changing the current frame, a one-line summary of the frame is displayed as if the ‘,y’ command was entered.

,N+

Move forward by N frames in the chain of continuation frames (i.e. towards older continuation frames). After changing the current frame, a one-line summary of the frame is displayed as if the ‘,y’ command was entered.

,N-

Move backward by N frames in the chain of continuation frames (i.e. towards more recent continuation frames). After changing the current frame, a one-line summary of the frame is displayed as if the ‘,y’ command was entered.

,+

Equivalent to ‘,1+’.

,-

Equivalent to ‘,1-’.

,++

Equivalent to ‘,N+’ where N is the number of continuation frames displayed at the head of a backtrace.

,--

Equivalent to ‘,N-’ where N is the number of continuation frames displayed at the head of a backtrace.

,y

Display a one-line summary of the current frame. The information is displayed in four fields. The first field is the frame number. The second field is the procedure that created the frame or ‘(interaction)’ if the frame was created by an expression entered at the REPL. The remaining fields describe the subproblem associated with the frame, that is the expression whose value is being computed. The third field is the location of the subproblem’s source code and the fourth field is a reproduction of the source code, possibly truncated to fit on the line. The last two fields may be missing if that information is not available. In particular, the third field is missing when the frame was created by a user call to the ‘eval’ procedure or by a compiled procedure not compiled with the declaration ‘debug-location’, and the last field is missing when the frame was created by a compiled procedure not compiled with the declaration ‘debug-source’.

,b

Display a backtrace summarizing each frame in the chain of continuation frames starting with the current frame. For each frame, the same information as for the ‘,y’ command is displayed (except that location information is displayed in the format ‘stream@line:column’). If there are more than 15 frames in the chain of continuation frames, some of the middle frames will be omitted.

,be

Like the ‘,b’ command but also display the environment.

,bed

Like the ‘,be’ command but also display the dynamic environment.

,(b expr)

Display the backtrace of expr’s value, X, which is obtained by evaluating expr in the current frame. X must be a continuation or a thread. When X is a continuation, the frames in that continuation are displayed. When X is a thread, the backtrace of the current continuation of that thread is displayed.

,(be expr)

Like the ‘,(b expr)’ command but also display the environment.

,(bed expr)

Like the ‘,(be expr)’ command but also display the dynamic environment.

,i

Pretty print the procedure that created the current frame or ‘(interaction)’ if the frame was created by an expression entered at the REPL. Compiled procedures will only be pretty printed when they are compiled with the declaration ‘debug-source’.

,e

Display the environment which is accessible from the current frame. The lexical environment is displayed, followed by the dynamic environment if the parameter object repl-display-dynamic-environment? is not false. Global lexical variables are not displayed. Moreover the frame must have been created by interpreted code or code compiled with the declaration ‘debug-environments’. Due to space safety considerations and compiler optimizations, some of the lexical variable bindings may be missing. Lexical variable bindings are displayed using the format ‘variable = expression’ (when variable is mutable) or ‘variable == expression’ (when variable is immutable, which may happen in compiled code due to compiler optimization) and dynamically-bound parameter bindings are displayed using the format ‘(parameter) = expression’. Note that expression can be a self-evaluating expression (number, string, boolean, character, ...), a quoted expression, a lambda expression or a global variable (the last two cases, which are only used when the value of the variable or parameter is a procedure, simplifies the debugging of higher-order procedures). A parameter can be a quoted expression or a global variable. Lexical bindings are displayed in inverse binding order (most deeply nested first) and shadowed variables are included in the list.

,ed

Like the ‘,e’ command but the dynamic environment is always displayed.

,(e expr)

Display the environment of expr’s value, X, which is obtained by evaluating expr in the current frame. X must be a continuation, a thread, a procedure, or a nonnegative integer. When X is a continuation, the environment at that point in the code is displayed. When X is a thread, the environment of the current continuation of that thread is displayed. When X is a procedure, the lexical environment where X was created is combined with the current continuation and this combined environment is displayed. When X is an integer, the environment at frame number X of the continuation is displayed.

,(ed expr)

Like the ‘,(e expr)’ command but the dynamic environment is always displayed.

,st

Display the state of the threads in the current thread’s thread group. A thread can be: uninitialized, initialized, active, and terminated (normally or abnormally). Active threads can be running, sleeping and waiting on a synchronization object (mutex, condition variable or port) possibly with a timeout.

,(st expr)

Display the state of a specific thread or thread group. The value of expr must be a thread or thread group.

,(v expr)

Start a new REPL visiting expr’s value, X, which is obtained by evaluating expr in the current frame. X must be a continuation, a thread, a procedure, or a nonnegative integer. When X is a continuation, the new REPL’s continuation is X and evaluations are done in the environment at that point in the code. When X is a thread, the thread is interrupted and the new REPL’s continuation is the point where the thread was interrupted. When X is a procedure, the lexical environment where X was created is combined with the current continuation and evaluations are done in this combined environment. When X is an integer, the REPL is started in frame number X of the continuation.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.3 Debugging example

Here is a sample interaction with gsi:

 
$ gsi
Gambit v4.6.6

> (define (invsqr x) (/ 1 (expt x 2)))
> (define (mymap fn lst)
    (define (mm in)
      (if (null? in)
          '()
          (cons (fn (car in)) (mm (cdr in)))))
    (mm lst))
> (mymap invsqr '(5 2 hello 9 1))
*** ERROR IN invsqr, (console)@1.25 -- (Argument 1) NUMBER expected
(expt 'hello 2)
1> ,i
#<procedure #2 invsqr> =
(lambda (x) (/ 1 (expt x 2)))
1> ,e
x = 'hello
1> ,b
0  invsqr                    (console)@1:25          (expt x 2)
1  #<procedure #4>           (console)@6:17          (fn (car in))
2  #<procedure #4>           (console)@6:31          (mm (cdr in))
3  #<procedure #4>           (console)@6:31          (mm (cdr in))
4  (interaction)             (console)@8:1           (mymap invsqr '(5 2 hel...
1> ,+
1  #<procedure #4>           (console)@6.17          (fn (car in))
1\1> (pp #4)
(lambda (in) (if (null? in) '() (cons (fn (car in)) (mm (cdr in)))))
1\1> ,e
in = '(hello 9 1)
mm = (lambda (in) (if (null? in) '() (cons (fn (car in)) (mm (cdr in)))))
fn = invsqr
lst = '(5 2 hello 9 1)
1\1> ,(e mm)
mm = (lambda (in) (if (null? in) '() (cons (fn (car in)) (mm (cdr in)))))
fn = invsqr
lst = '(5 2 hello 9 1)
1\1> fn
#<procedure #2 invsqr>
1\1> (pp fn)
(lambda (x) (/ 1 (expt x 2)))
1\1> ,+
2  #<procedure #4>           (console)@6.31          (mm (cdr in))
1\2> ,e
in = '(2 hello 9 1)
mm = (lambda (in) (if (null? in) '() (cons (fn (car in)) (mm (cdr in)))))
fn = invsqr
lst = '(5 2 hello 9 1)
1\2> ,(c (list 3 4 5))
(1/25 1/4 3 4 5)
> ,q

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.4 Procedures related to debugging

(help subject)procedure
(help-browser [new-value])procedure

The help procedure displays the section of the Gambit manual with the definition of the procedure or special form subject, which must be a procedure or symbol. For example the call (help gensym) will show the section documenting the gensym procedure and the call (help 'time) will show the section documenting the time special form. The help procedure returns the void object.

The parameter object help-browser is bound to a string naming the external program that is used by the help procedure to view the documentation. Initially it is bound to the empty string. In normal circumstances when help-browser is bound to an empty string the help procedure runs the script ~~bin/gambc-doc.bat which searches for a suitable web browser to open the documentation in HTML format. Unless the system was built with the command ‘configure --enable-help-browser=...’, the text-only browser ‘lynx’ (see http://lynx.isc.org/) will be used by default if it is available. We highly recommend that you install this browser if you are interested in viewing the documentation within the console in which the REPL is running. You can exit ‘lynx’ conveniently by typing an end of file (usually <^D>).

For example:

 
> (help-browser "firefox") ; use firefox instead of lynx
> (help 'gensym)
> (help gensym) ; OK because gensym is a procedure
> (help 'time)
> (help time) ; not OK because time is a special form
*** ERROR IN (console)@5.7 -- Macro name can't be used as a variable: time
> 
(repl-result-history-ref i)procedure
(repl-result-history-max-length-set! n)procedure

The REPL keeps a history of the last few results printed by the REPL. The call (repl-result-history-ref i) returns the ith previous result (the last for i=0, the next to last for i=1, etc). By default the REPL result history remembers up to 3 results. The maximal length of the history can be set to n between 0 and 10 by a call to (repl-result-history-max-length-set! n).

For convenience the reader defines an abbreviation for calling repl-result-history-ref. Tokens formed by a sequence of one or more hash signs, such as ‘#’, ‘##’, etc, are expanded by the reader into the list (repl-result-history-ref i), where i is the number of hash signs minus 1. In other words, ‘#’ will return the last result printed by the REPL, ‘##’ will return the next to last, etc.

For example:

 
> (map (lambda (x) (* x x)) '(1 2 3))
(1 4 9)
> (reverse #)
(9 4 1)
> (append # ##)
(9 4 1 1 4 9)
> 1
1
> 1
1
> (+ # ##)
2
> (+ # ##)
3
> (+ # ##)
5
> ####
*** ERROR IN (console)@9.1 -- (Argument 1) Out of range
(repl-result-history-ref 3)
1> 
(trace proc)procedure
(untrace proc)procedure

The trace procedure starts tracing calls to the specified procedures. When a traced procedure is called, a line containing the procedure and its arguments is displayed (using the procedure call expression syntax). The line is indented with a sequence of vertical bars which indicate the nesting depth of the procedure’s continuation. After the vertical bars is a greater-than sign which indicates that the evaluation of the call is starting.

When a traced procedure returns a result, it is displayed with the same indentation as the call but without the greater-than sign. This makes it easy to match calls and results (the result of a given call is the value at the same indentation as the greater-than sign). If a traced procedure P1 performs a tail call to a traced procedure P2, then P2 will use the same indentation as P1. This makes it easy to spot tail calls. The special handling for tail calls is needed to preserve the space complexity of the program (i.e. tail calls are implemented as required by Scheme even when they involve traced procedures).

The untrace procedure stops tracing calls to the specified procedures. When no argument is passed to the trace procedure, the list of procedures currently being traced is returned. The void object is returned by the trace procedure when it is passed one or more arguments. When no argument is passed to the untrace procedure stops all tracing and returns the void object. A compiled procedure may be traced but only if it is bound to a global variable.

For example:

 
> (define (fact n) (if (< n 2) 1 (* n (fact (- n 1)))))
> (trace fact)
> (fact 5)
| > (fact 5)
| | > (fact 4)
| | | > (fact 3)
| | | | > (fact 2)
| | | | | > (fact 1)
| | | | | 1
| | | | 2
| | | 6
| | 24
| 120
120
> (trace -)
*** WARNING -- Rebinding global variable "-" to an interpreted procedure
> (define (fact-iter n r) (if (< n 2) r (fact-iter (- n 1) (* n r))))
> (trace fact-iter)
> (fact-iter 5 1)
| > (fact-iter 5 1)
| | > (- 5 1)
| | 4
| > (fact-iter 4 5)
| | > (- 4 1)
| | 3
| > (fact-iter 3 20)
| | > (- 3 1)
| | 2
| > (fact-iter 2 60)
| | > (- 2 1)
| | 1
| > (fact-iter 1 120)
| 120
120
> (trace)
(#<procedure #2 fact-iter> #<procedure #3 -> #<procedure #4 fact>)
> (untrace)
> (fact 5)
120
(step)procedure
(step-level-set! level)procedure

The step procedure enables single-stepping mode. After the call to step the computation will stop just before the interpreter executes the next evaluation step (as defined by step-level-set!). A nested REPL is then started. Note that because single-stepping is stopped by the REPL whenever the prompt is displayed it is pointless to enter (step) by itself. On the other hand entering (begin (step) expr) will evaluate expr in single-stepping mode.

The procedure step-level-set! sets the stepping level which determines the granularity of the evaluation steps when single-stepping is enabled. The stepping level level must be an exact integer in the range 0 to 7. At a level of 0, the interpreter ignores single-stepping mode. At higher levels the interpreter stops the computation just before it performs the following operations, depending on the stepping level:

  1. procedure call
  2. delay special form and operations at lower levels
  3. lambda special form and operations at lower levels
  4. define special form and operations at lower levels
  5. set! special form and operations at lower levels
  6. variable reference and operations at lower levels
  7. constant reference and operations at lower levels

The default stepping level is 7.

For example:

 
> (define (fact n) (if (< n 2) 1 (* n (fact (- n 1)))))
> (step-level-set! 1)
> (begin (step) (fact 5))
*** STOPPED IN (console)@3.15
1> ,s
| > (fact 5)
*** STOPPED IN fact, (console)@1.22
1> ,s
| | > (< n 2)
| | #f
*** STOPPED IN fact, (console)@1.43
1> ,s
| | > (- n 1)
| | 4
*** STOPPED IN fact, (console)@1.37
1> ,s
| | > (fact (- n 1))
*** STOPPED IN fact, (console)@1.22
1> ,s
| | | > (< n 2)
| | | #f
*** STOPPED IN fact, (console)@1.43
1> ,s
| | | > (- n 1)
| | | 3
*** STOPPED IN fact, (console)@1.37
1> ,l
| | | > (fact (- n 1))
*** STOPPED IN fact, (console)@1.22
1> ,l
| | > (* n (fact (- n 1)))
| | 24
*** STOPPED IN fact, (console)@1.32
1> ,l
| > (* n (fact (- n 1)))
| 120
120
(break proc)procedure
(unbreak proc)procedure

The break procedure places a breakpoint on each of the specified procedures. When a procedure is called that has a breakpoint, the interpreter will enable single-stepping mode (as if step had been called). This typically causes the computation to stop soon inside the procedure if the stepping level is high enough.

The unbreak procedure removes the breakpoints on the specified procedures. With no argument, break returns the list of procedures currently containing breakpoints. The void object is returned by break if it is passed one or more arguments. With no argument unbreak removes all the breakpoints and returns the void object. A breakpoint can be placed on a compiled procedure but only if it is bound to a global variable.

For example:

 
> (define (double x) (+ x x))
> (define (triple y) (- (double (double y)) y))
> (define (f z) (* (triple z) 10))
> (break double)
> (break -)
*** WARNING -- Rebinding global variable "-" to an interpreted procedure
> (f 5)
*** STOPPED IN double, (console)@1.21
1> ,b
0  double                    (console)@1:21          +
1  triple                    (console)@2:31          (double y)
2  f                         (console)@3:18          (triple z)
3  (interaction)             (console)@6:1           (f 5)
1> ,e
x = 5
1> ,c
*** STOPPED IN double, (console)@1.21
1> ,c
*** STOPPED IN f, (console)@3.29
1> ,c
150
> (break)
(#<procedure #3 -> #<procedure #4 double>)
> (unbreak)
> (f 5)
150
(generate-proper-tail-calls [new-value])procedure

[Note: this procedure is DEPRECATED and will be removed in a future version of Gambit. Use the ‘proper-tail-calls’ declaration instead.]

The parameter object generate-proper-tail-calls is bound to a boolean value controlling how the interpreter handles tail calls. When it is bound to #f the interpreter will treat tail calls like nontail calls, that is a new continuation will be created for the call. This setting is useful for debugging, because when a primitive signals an error the location information will point to the call site of the primitive even if this primitive was called with a tail call. The initial value of this parameter object is #t, which means that a tail call will reuse the continuation of the calling function.

This parameter object only affects code that is subsequently processed by load or eval, or entered at the REPL.

For example:

 
> (generate-proper-tail-calls)
#t
> (let loop ((i 1)) (if (< i 10) (loop (* i 2)) oops))
*** ERROR IN #<procedure #2>, (console)@2.47 -- Unbound variable: oops
1> ,b
0  #<procedure #2>           (console)@2:47          oops
1  (interaction)             (console)@2:1           ((letrec ((loop (lambda...
1> ,t
> (generate-proper-tail-calls #f)
> (let loop ((i 1)) (if (< i 10) (loop (* i 2)) oops))
*** ERROR IN #<procedure #3>, (console)@6.47 -- Unbound variable: oops
1> ,b
0  #<procedure #3>           (console)@6:47          oops
1  #<procedure #3>           (console)@6:32          (loop (* i 2))
2  #<procedure #3>           (console)@6:32          (loop (* i 2))
3  #<procedure #3>           (console)@6:32          (loop (* i 2))
4  #<procedure #3>           (console)@6:32          (loop (* i 2))
5  (interaction)             (console)@6:1           ((letrec ((loop (lambda...

(display-environment-set! display?)procedure

[Note: this procedure is DEPRECATED and will be removed in a future version of Gambit. Use the parameter object repl-display-environment? instead.]

This procedure sets a flag that controls the automatic display of the environment by the REPL. If display? is true, the environment is displayed by the REPL before the prompt. The default setting is not to display the environment.

(repl-display-environment? display?)procedure

The parameter object repl-display-environment? is bound to a boolean value that controls the automatic display of the environment by the REPL. If display? is true, the environment is displayed by the REPL before the prompt. This is particularly useful in single-stepping mode. The default setting is not to display the environment.

(display-dynamic-environment? display?)procedure

The parameter object display-dynamic-environment? is bound to a boolean value that controls wether the dynamic environment is displayed when the environment is displayed. The default setting is not to display the dynamic environment.

(pretty-print obj [port])procedure

This procedure pretty-prints obj on the port port. If it is not specified, port defaults to the current output-port.

For example:

 
> (pretty-print
    (let* ((x '(1 2 3 4)) (y (list x x x))) (list y y y)))
(((1 2 3 4) (1 2 3 4) (1 2 3 4))
 ((1 2 3 4) (1 2 3 4) (1 2 3 4))
 ((1 2 3 4) (1 2 3 4) (1 2 3 4)))
(pp obj [port])procedure

This procedure pretty-prints obj on the port port. When obj is a procedure created by the interpreter or a procedure created by code compiled with the declaration ‘debug-source’, the procedure’s source code is displayed. If it is not specified, port defaults to the interaction channel (i.e. the output will appear at the REPL).

For example:

 
> (define (f g) (+ (time (g 100)) (time (g 1000))))
> (pp f)
(lambda (g)
  (+ (##time (lambda () (g 100)) '(g 100))
     (##time (lambda () (g 1000)) '(g 1000))))
(gc-report-set! report?)procedure

This procedure controls the generation of reports during garbage collections. If the argument is true, a brief report of memory usage is generated after every garbage collection. It contains: the time taken for this garbage collection, the amount of memory allocated in megabytes since the program was started, the size of the heap in megabytes, the heap memory in megabytes occupied by live data, the proportion of the heap occupied by live data, and the number of bytes occupied by movable and nonmovable objects.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.5 Console line-editing

The console implements a simple Scheme-friendly line-editing user-interface that is enabled by default. It offers parentheses balancing, a history of previous commands, symbol completion, and several emacs-compatible keyboard commands. The user’s input is displayed in a bold font and the output produced by the system is in a plain font. The history of previous commands is saved in the file ‘~/.gambc_history’. It is restored when a REPL is started.

Symbol completion is triggered with the tab key. When the cursor is after a sequence of characters that can form a symbol, typing the tab key will search the symbol table for the first symbol (in alphabetical order) that begins with that sequence and insert that symbol. Typing the tab key in succession will cycle through all symbols with that prefix. When all possible symbols have been shown or there are no possible completions, the text reverts to the uncompleted symbol and the bell is rung.

Here are the keyboard commands available (where the ‘M-’ prefix means the escape key is typed and the ‘C-’ prefix means the control key is pressed):

C-d

Generate an end-of-file when the line is empty, otherwise delete character at cursor.

delete or backspace

Delete character before cursor.

M-C-d

Delete word forward and keep a copy of this text on the clipboard.

M-delete

Delete word backward and keep a copy of this text on the clipboard.

M-backspace

Delete S-expression backward and keep a copy of this text on the clipboard.

C-a

Move cursor to beginning of line.

C-e

Move cursor to end of line.

C-b or left-arrow

Move cursor left one character.

M-b

Move cursor left one word.

M-C-b or M-left-arrow

Move cursor left one S-expression.

C-f or right-arrow

Move cursor right one character.

M-f

Move cursor right one word.

M-C-f or M-right-arrow

Move cursor right one S-expression.

C-p or M-p or up-arrow

Move to previous line in history.

C-n or M-n or down-arrow

Move to next line in history.

C-t

Transpose character at cursor with previous character.

M-t

Transpose word after cursor with previous word.

M-C-t

Transpose S-expression after cursor with previous S-expression.

C-l

Clear console and redraw line being edited.

C-nul

Set the mark to the cursor.

C-w

Delete the text between the cursor and the mark and keep a copy of this text on the clipboard.

C-k

Delete the text from the cursor to the end of the line and keep a copy of this text on the clipboard.

C-y

Paste the text that is on the clipboard.

F8

Same as typing ‘#||#,c;’ (REPL command to continue the computation).

F9

Same as typing ‘#||#,-;’ (REPL command to move to newer frame).

F10

Same as typing ‘#||#,+;’ (REPL command to move to older frame).

F11

Same as typing ‘#||#,s;’ (REPL command to step the computation).

F12

Same as typing ‘#||#,l;’ (REPL command to leap the computation).

On Mac OS X, depending on your configuration, you may have to press the fn key to access the function key F12 and the option key to access the other function keys.

On Microsoft Windows the clipboard is the system clipboard. This allows text to be copied and pasted between the program and other applications. On other operating systems the clipboard is internal to the program (it is not integrated with the operating system).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.6 Emacs interface

Gambit comes with the Emacs package ‘gambit.el’ which provides a nice environment for running Gambit from within the Emacs editor. This package filters the standard output of the Gambit process and when it intercepts a location information (in the format ‘stream@line.column’ where stream is either ‘(stdin)’ when the expression was obtained from standard input, ‘(console)’ when the expression was obtained from the console, or a string naming a file) it opens a window to highlight the corresponding expression.

To use this package, make sure the file ‘gambit.el’ is accessible from your load-path and that the following lines are in your ‘.emacs’ file:

 
(autoload 'gambit-inferior-mode "gambit" "Hook Gambit mode into cmuscheme.")
(autoload 'gambit-mode "gambit" "Hook Gambit mode into scheme.")
(add-hook 'inferior-scheme-mode-hook (function gambit-inferior-mode))
(add-hook 'scheme-mode-hook (function gambit-mode))
(setq scheme-program-name "gsi -:d-")

Alternatively, if you don’t mind always loading this package, you can simply add this line to your ‘.emacs’ file:

 
(require 'gambit)

You can then start an inferior Gambit process by typing ‘M-x run-scheme’. The commands provided in ‘cmuscheme’ mode will be available in the Gambit interaction buffer (i.e. ‘*scheme*’) and in buffers attached to Scheme source files. Here is a list of the most useful commands (for a complete list type ‘C-h m’ in the Gambit interaction buffer):

C-x C-e

Evaluate the expression which is before the cursor (the expression will be copied to the Gambit interaction buffer).

C-c C-z

Switch to Gambit interaction buffer.

C-c C-l

Load a file (file attached to current buffer is default) using (load file).

C-c C-k

Compile a file (file attached to current buffer is default) using (compile-file file).

The file ‘gambit.el’ provides these additional commands:

F8 or C-c c

Continue the computation (same as typing ‘#||#,c;’ to the REPL).

F9 or C-c ]

Move to newer frame (same as typing ‘#||#,-;’ to the REPL).

F10 or C-c [

Move to older frame (same as typing ‘#||#,+;’ to the REPL).

F11 or C-c s

Step the computation (same as typing ‘#||#,s;’ to the REPL).

F12 or C-c l

Leap the computation (same as typing ‘#||#,l;’ to the REPL).

C-c _

Removes the last window that was opened to highlight an expression.

The two keystroke version of these commands can be shortened to ‘M-c’, ‘M-[’, ‘M-]’, ‘M-s’, ‘M-l’, and ‘M-_’ respectively by adding this line to your ‘.emacs’ file:

 
(setq gambit-repl-command-prefix "\e")

This is more convenient to type than the two keystroke ‘C-c’ based sequences but the purist may not like this because it does not follow normal Emacs conventions.

Here is what a typical ‘.emacs’ file will look like:

 
(setq load-path ; add directory containing gambit.el
  (cons "/usr/local/Gambit-C/share/emacs/site-lisp"
        load-path))
(setq scheme-program-name "/tmp/gsi -:d-") ; if gsi not in executable path
(setq gambit-highlight-color "gray") ; if you don't like the default
(setq gambit-repl-command-prefix "\e") ; if you want M-c, M-s, etc
(require 'gambit)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

5.7 GUIDE

The implementation and documentation for GUIDE, the Gambit Universal IDE, are not yet complete.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

6. Scheme extensions


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

6.1 Extensions to standard procedures

(transcript-on file)procedure
(transcript-off)procedure

These procedures do nothing.

(call-with-current-continuation proc)procedure
(call/cc proc)procedure

The procedure call-with-current-continuation is bound to the global variables call-with-current-continuation and call/cc.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

6.2 Extensions to standard special forms

(lambda lambda-formals body)special form
(define (variable define-formals) body)special form

These forms are extended versions of the lambda and define special forms of standard Scheme. They allow the use of optional formal arguments, either positional or named, and support the syntax and semantics of the DSSSL standard.

When the procedure introduced by a lambda (or define) is applied to a list of actual arguments, the formal and actual arguments are processed as specified in the R4RS if the lambda-formals (or define-formals) is a r4rs-lambda-formals (or r4rs-define-formals).

If the formal-argument-list matches dsssl-formal-argument-list or extended-formal-argument-list they are processed as follows:

  1. Variables in required-formal-arguments are bound to successive actual arguments starting with the first actual argument. It shall be an error if there are fewer actual arguments than required-formal-arguments.
  2. Next variables in optional-formal-arguments are bound to remaining actual arguments. If there are fewer remaining actual arguments than optional-formal-arguments, then the variables are bound to the result of evaluating initializer, if one was specified, and otherwise to #f. The initializer is evaluated in an environment in which all previous formal arguments have been bound.
  3. If #!key does not appear in the formal-argument-list and there is no rest-formal-argument then it shall be an error if there are any remaining actual arguments.
  4. If #!key does not appear in the formal-argument-list and there is a rest-formal-argument then the rest-formal-argument is bound to a list of all remaining actual arguments.
  5. If #!key appears in the formal-argument-list and there is no rest-formal-argument then there shall be an even number of remaining actual arguments. These are interpreted as a series of pairs, where the first member of each pair is a keyword specifying the argument name, and the second is the corresponding value. It shall be an error if the first member of a pair is not a keyword. It shall be an error if the argument name is not the same as a variable in a keyword-formal-argument. If the same argument name occurs more than once in the list of actual arguments, then the first value is used. If there is no actual argument for a particular keyword-formal-argument, then the variable is bound to the result of evaluating initializer if one was specified, and otherwise to #f. The initializer is evaluated in an environment in which all previous formal arguments have been bound.
  6. If #!key appears in the formal-argument-list and there is a rest-formal-argument before the #!key then there may be an even or odd number of remaining actual arguments and the rest-formal-argument is bound to a list of all remaining actual arguments. Then, these remaining actual arguments are scanned from left to right in pairs, stopping at the first pair whose first element is not a keyword. Each pair whose first element is a keyword matching the name of a keyword-formal-argument gives the value (i.e. the second element of the pair) of the corresponding formal argument. If the same argument name occurs more than once in the list of actual arguments, then the first value is used. If there is no actual argument for a particular keyword-formal-argument, then the variable is bound to the result of evaluating initializer if one was specified, and otherwise to #f. The initializer is evaluated in an environment in which all previous formal arguments have been bound.
  7. If #!key appears in the formal-argument-list and there is a rest-formal-argument after the #!key then there may be an even or odd number of remaining actual arguments. The remaining actual arguments are scanned from left to right in pairs, stopping at the first pair whose first element is not a keyword. Each pair shall have as its first element a keyword matching the name of a keyword-formal-argument; the second element gives the value of the corresponding formal argument. If the same argument name occurs more than once in the list of actual arguments, then the first value is used. If there is no actual argument for a particular keyword-formal-argument, then the variable is bound to the result of evaluating initializer if one was specified, and otherwise to #f. The initializer is evaluated in an environment in which all previous formal arguments have been bound. Finally, the rest-formal-argument is bound to the list of the actual arguments that were not scanned (i.e. after the last keyword/value pair).

In all cases it is an error for a variable to appear more than once in a formal-argument-list.

Note that this specification is compatible with the DSSSL language standard (i.e. a correct DSSSL program will have the same semantics when run with Gambit).

It is unspecified whether variables receive their value by binding or by assignment. Currently the compiler and interpreter use different methods, which can lead to different semantics if call-with-current-continuation is used in an initializer. Note that this is irrelevant for DSSSL programs because call-with-current-continuation does not exist in DSSSL.

For example:

 
> ((lambda (#!rest x) x) 1 2 3)
(1 2 3)
> (define (f a #!optional b) (list a b))
> (define (g a #!optional (b a) #!key (k (* a b))) (list a b k))
> (define (h1 a #!rest r #!key k) (list a k r))
> (define (h2 a #!key k #!rest r) (list a k r))
> (f 1)
(1 #f)
> (f 1 2)
(1 2)
> (g 3)
(3 3 9)
> (g 3 4)
(3 4 12)
> (g 3 4 k: 5)
(3 4 5)
> (g 3 4 k: 5 k: 6)
(3 4 5)
> (h1 7)
(7 #f ())
> (h1 7 k: 8 9)
(7 8 (k: 8 9))
> (h1 7 k: 8 z: 9)
(7 8 (k: 8 z: 9))
> (h2 7)
(7 #f ())
> (h2 7 k: 8 9)
(7 8 (9))
> (h2 7 k: 8 z: 9)
*** ERROR IN (console)@17.1 -- Unknown keyword argument passed to procedure
(h2 7 k: 8 z: 9)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

6.3 Miscellaneous extensions

(vector-copy vector)procedure

This procedure returns a newly allocated vector with the same content as the vector vector. Note that the elements are not recursively copied.

For example:

 
> (define v1 '#(1 2 3))
> (define v2 (vector-copy v1))
> v2
#(1 2 3)
> (eq? v1 v2)
#f
(subvector vector start end)procedure

This procedure is the vector analog of the substring procedure. It returns a newly allocated vector formed from the elements of the vector vector beginning with index start (inclusive) and ending with index end (exclusive).

For example:

 
> (subvector '#(a b c d e f) 3 5)
#(d e)
(vector-append vector)procedure

This procedure is the vector analog of the string-append procedure. It returns a newly allocated vector whose elements form the concatenation of the given vectors.

For example:

 
> (define v '#(1 2 3))
> (vector-append v v v)
#(1 2 3 1 2 3 1 2 3)
(append-vectors lst)procedure

This procedure returns a newly allocated vector whose elements form the concatenation of all the vectors in the list lst. It is equivalent to (apply vector-append lst).

For example:

 
> (define v '#(1 2 3))
> (append-vectors (list v v v))
#(1 2 3 1 2 3 1 2 3)
(subvector-fill! vector start end fill)procedure

This procedure is like vector-fill!, but fills a selected part of the given vector. It sets the elements of the vector vector, beginning with index start (inclusive) and ending with index end (exclusive) to fill. The value returned is unspecified.

For example:

 
> (define v (vector 'a 'b 'c 'd 'e 'f))
> (subvector-fill! v 3 5 'x)
> v
#(a b c x x f)
(subvector-move! src-vector src-start src-end dst-vector dst-start)procedure

This procedure replaces part of the contents of vector dst-vector with part of the contents of vector src-vector. It copies elements from src-vector, beginning with index src-start (inclusive) and ending with index src-end (exclusive) to dst-vector beginning with index dst-start (inclusive). The value returned is unspecified.

For example:

 
> (define v1 '#(1 2 3 4 5 6))
> (define v2 (vector 'a 'b 'c 'd 'e 'f))
> (subvector-move! v1 3 5 v2 1)
> v2
#(a 4 5 d e f)
(vector-shrink! vector k)procedure

This procedure shortens the vector vector so that its new size is k. The value returned is unspecified.

For example:

 
> (define v (vector 'a 'b 'c 'd 'e 'f))
> v
#(a b c d e f)
> (vector-shrink! v 3)
> v
#(a b c)
(append-strings lst)procedure

This procedure returns a newly allocated string whose elements form the concatenation of all the strings in the list lst. It is equivalent to (apply string-append lst).

For example:

 
> (define s "abc")
> (append-strings (list s s s))
"abcabcabc"
(substring-fill! string start end fill)procedure

This procedure is like string-fill!, but fills a selected part of the given string. It sets the elements of the string string, beginning with index start (inclusive) and ending with index end (exclusive) to fill. The value returned is unspecified.

For example:

 
> (define s (string #\a #\b #\c #\d #\e #\f))
> (substring-fill! s 3 5 #\x)
> s
"abcxxf"
(substring-move! src-string src-start src-end dst-string dst-start)procedure

This procedure replaces part of the contents of string dst-string with part of the contents of string src-string. It copies elements from src-string, beginning with index src-start (inclusive) and ending with index src-end (exclusive) to dst-string beginning with index dst-start (inclusive). The value returned is unspecified.

For example:

 
> (define s1 "123456")
> (define s2 (string #\a #\b #\c #\d #\e #\f))
> (substring-move! s1 3 5 s2 1)
> s2
"a45def"
(string-shrink! string k)procedure

This procedure shortens the string string so that its new size is k. The value returned is unspecified.

For example:

 
> (define s (string #\a #\b #\c #\d #\e #\f))
> s
"abcdef"
> (string-shrink! s 3)
> s
"abc"
(box obj)procedure
(box? obj)procedure
(unbox box)procedure
(set-box! box obj)procedure

These procedures implement the box data type. A box is a cell containing a single mutable field. The lexical syntax of a box containing the object obj is #&obj (see section Box syntax).

The procedure box returns a new box object whose content is initialized to obj. The procedure box? returns #t if obj is a box, and otherwise returns #f. The procedure unbox returns the content of the box box. The procedure set-box! changes the content of the box box to obj. The procedure set-box! returns an unspecified value.

For example:

 
> (define b (box 0))
> b
#&0
> (define (inc!) (set-box! b (+ (unbox b) 1)))
> (inc!)
> b
#&1
> (unbox b)
1
(keyword? obj)procedure
(keyword->string keyword)procedure
(string->keyword string)procedure

These procedures implement the keyword data type. Keywords are similar to symbols but are self evaluating and distinct from the symbol data type. The lexical syntax of keywords is specified in Keyword syntax.

The procedure keyword? returns #t if obj is a keyword, and otherwise returns #f. The procedure keyword->string returns the name of keyword as a string. The procedure string->keyword returns the keyword whose name is string.

For example:

 
> (keyword? 'color)
#f
> (keyword? color:)
#t
> (keyword->string color:)
"color"
> (string->keyword "color")
color:
(gensym [prefix])procedure

This procedure returns a new uninterned symbol. Uninterned symbols are guaranteed to be distinct from the symbols generated by the procedures read and string->symbol. The symbol prefix is the prefix used to generate the new symbol’s name. If it is not specified, the prefix defaults to ‘g’.

For example:

 
> (gensym)
#:g0
> (gensym)
#:g1
> (gensym 'star-trek-)
#:star-trek-2
(make-uninterned-symbol name [hash])procedure
(uninterned-symbol? obj)procedure

The procedure make-uninterned-symbol returns a new uninterned symbol whose name is name and hash is hash. The name must be a string and the hash must be a nonnegative fixnum.

The procedure uninterned-symbol? returns #t when obj is a symbol that is uninterned and #f otherwise.

For example:

 
> (uninterned-symbol? (gensym))
#t
> (make-uninterned-symbol "foo")
#:foo:
> (uninterned-symbol? (make-uninterned-symbol "foo"))
#t
> (uninterned-symbol? 'hello)
#f
> (uninterned-symbol? 123)
#f
(make-uninterned-keyword name [hash])procedure
(uninterned-keyword? obj)procedure

The procedure make-uninterned-keyword returns a new uninterned keyword whose name is name and hash is hash. The name must be a string and the hash must be a nonnegative fixnum.

The procedure uninterned-keyword? returns #t when obj is a keyword that is uninterned and #f otherwise.

For example:

 
> (make-uninterned-keyword "foo")
#:foo:
> (uninterned-keyword? (make-uninterned-keyword "foo"))
#t
> (uninterned-keyword? hello:)
#f
> (uninterned-keyword? 123)
#f
(void)procedure

This procedure returns the void object. The read-eval-print loop prints nothing when the result is the void object.

(eval expr [env])procedure

The first parameter is a datum representing an expression. The eval procedure evaluates this expression in the global interaction environment and returns the result. If present, the second parameter is ignored (it is provided for compatibility with R5RS).

For example:

 
> (eval '(+ 1 2))
3
> ((eval 'car) '(1 2))
1
> (eval '(define x 5))
> x
5
(include file)special form

The file parameter must be a string naming an existing file containing Scheme source code. The include special form splices the content of the specified source file. This form can only appear where a define form is acceptable.

For example:

 
(include "macros.scm")

(define (f lst)
  (include "sort.scm")
  (map sqrt (sort lst)))
(define-macro (name define-formals) body)special form

Define name as a macro special form which expands into body. This form can only appear where a define form is acceptable. Macros are lexically scoped. The scope of a local macro definition extends from the definition to the end of the body of the surrounding binding construct. Macros defined at the top level of a Scheme module are only visible in that module. To have access to the macro definitions contained in a file, that file must be included using the include special form. Macros which are visible from the REPL are also visible during the compilation of Scheme source files.

For example:

 
(define-macro (unless test . body)
  `(if ,test #f (begin ,@body)))

(define-macro (push var #!optional val)
  `(set! ,var (cons ,val ,var)))

To examine the code into which a macro expands you can use the compiler’s ‘-expansion’ option or the pp procedure. For example:

 
> (define-macro (push var #!optional val)
    `(set! ,var (cons ,val ,var)))
> (pp (lambda () (push stack 1) (push stack) (push stack 3)))
(lambda ()
  (set! stack (cons 1 stack))
  (set! stack (cons #f stack))
  (set! stack (cons 3 stack)))
(define-syntax name expander)special form

Define name as a macro special form whose expansion is specified by expander. This form is available only when the runtime option ‘-:s’ is used. This option causes the loading of the ~~lib/syntax-case support library, which is the Hieb and Dybvig portable syntax-case implementation which has been ported to the Gambit interpreter and compiler. Note that this implementation of syntax-case does not support special forms that are specific to Gambit.

For example:

 
$ gsi -:s
Gambit v4.6.6

> (define-syntax unless
    (syntax-rules ()
      ((unless test body ...)
       (if test #f (begin body ...)))))
> (let ((test 111)) (unless (= 1 2) (list test test)))
(111 111)
> (pp (lambda () (let ((test 111)) (unless (= 1 2) (list test test)))))
(lambda () ((lambda (%%test14) (if (= 1 2) #f (list %%test14 %%test14))) 111))
> (unless #f (pp xxx))
*** ERROR IN (console)@7.16 -- Unbound variable: xxx
(declare declaration)special form

This form introduces declarations to be used by the compiler (currently the interpreter ignores the declarations). This form can only appear where a define form is acceptable. Declarations are lexically scoped in the same way as macros. The following declarations are accepted by the compiler:

(dialect)

Use the given dialect’s semantics. dialect can be: ‘ieee-scheme’, ‘r4rs-scheme’, ‘r5rs-scheme’ or ‘gambit-scheme’.

(strategy)

Select block compilation or separate compilation. In block compilation, the compiler assumes that global variables defined in the current file that are not mutated in the file will never be mutated. strategy can be: ‘block’ or ‘separate’.

([not] inline)

Allow (or disallow) inlining of user procedures.

([not] inline-primitives primitive…)

The given primitives should (or should not) be inlined if possible (all primitives if none specified).

(inlining-limit n)

Select the degree to which the compiler inlines user procedures. n is the upper-bound, in percent, on code expansion that will result from inlining. Thus, a value of 300 indicates that the size of the program will not grow by more than 300 percent (i.e. it will be at most 4 times the size of the original). A value of 0 disables inlining. The size of a program is the total number of subexpressions it contains (i.e. the size of an expression is one plus the size of its immediate subexpressions). The following conditions must hold for a procedure to be inlined: inlining the procedure must not cause the size of the call site to grow more than specified by the inlining limit, the site of definition (the define or lambda) and the call site must be declared as (inline), and the compiler must be able to find the definition of the procedure referred to at the call site (if the procedure is bound to a global variable, the definition site must have a (block) declaration). Note that inlining usually causes much less code expansion than specified by the inlining limit (an expansion around 10% is common for n=350).

([not] lambda-lift)

Lambda-lift (or don’t lambda-lift) locally defined procedures.

([not] constant-fold)

Allow (or disallow) constant-folding of primitive procedures.

([not] standard-bindings var…)

The given global variables are known (or not known) to be equal to the value defined for them in the dialect (all variables defined in the standard if none specified).

([not] extended-bindings var…)

The given global variables are known (or not known) to be equal to the value defined for them in the runtime system (all variables defined in the runtime if none specified).

([not] run-time-bindings var…)

The given global variables will be tested at run time to see if they are equal to the value defined for them in the runtime system (all variables defined in the runtime if none specified).

([not] safe)

Generate (or don’t generate) code that will prevent fatal errors at run time. Note that in ‘safe’ mode certain semantic errors will not be checked as long as they can’t crash the system. For example the primitive char=? may disregard the type of its arguments in ‘safe’ as well as ‘not safe’ mode.

([not] interrupts-enabled)

Generate (or don’t generate) interrupt checks. Interrupt checks are used to detect user interrupts and also to check for stack overflows. Interrupt checking should not be turned off casually.

([not] debug)

Enable (or disable) the generation of debugging information. The kind of debugging information that is generated depends on the declarations ‘debug-location’, ‘debug-source’, and ‘debug-environments’. If any of the command line options ‘-debug’, ‘-debug-location’, ‘-debug-source’ and ‘-debug-environments’ are present, the ‘debug’ declaration is initially enabled, otherwise it is initially disabled. When all kinds of debugging information are generated there is a substantial increase in the C compilation time and the size of the generated code. When compiling a 3000 line Scheme file it was observed that the total compilation time is 500% longer and the executable code is 150% bigger.

([not] debug-location)

Select (or deselect) source code location debugging information. When this declaration and the ‘debug’ declaration are in effect, run time error messages indicate the location of the error in the source code file. If any of the command line options ‘-debug-source’ and ‘-debug-environments’ are present and ‘-debug-location’ is absent, the ‘debug-location’ declaration is initially disabled, otherwise it is initially enabled. When compiling a 3000 line Scheme file it was observed that the total compilation time is 200% longer and the executable code is 60% bigger.

([not] debug-source)

Select (or deselect) source code debugging information. When this declaration and the ‘debug’ declaration are in effect, run time error messages indicate the source code, the backtraces are more precise, and the pp procedure will display the source code of compiled procedures. If any of the command line options ‘-debug-location’ and ‘-debug-environments’ are present and ‘-debug-source’ is absent, the ‘debug-source’ declaration is initially disabled, otherwise it is initially enabled. When compiling a 3000 line Scheme file it was observed that the total compilation time is 90% longer and the executable code is 90% bigger.

([not] debug-environments)

Select (or deselect) environment debugging information. When this declaration and the ‘debug’ declaration are in effect, the debugger will have access to the environments of the continuations. In other words the local variables defined in compiled procedures (and not optimized away by the compiler) will be shown by the ‘,e’ REPL command. If any of the command line options ‘-debug-location’ and ‘-debug-source’ are present and ‘-debug-environments’ is absent, the ‘debug-environments’ declaration is initially disabled, otherwise it is initially enabled. When compiling a 3000 line Scheme file it was observed that the total compilation time is 70% longer and the executable code is 40% bigger.

([not] proper-tail-calls)

Generate (or don’t generate) proper tail calls. When proper tail calls are turned off, tail calls are handled like non-tail calls, that is a continuation frame will be created for all calls regardless of their kind. This is useful for debugging because the caller of a procedure will be visible in the backtrace produced by the REPL’s ‘,b’ command even when the call is a tail call. Be advised that this does cause stack space to be consumed for tail calls which may cause the stack to overflow when performing long iterations with tail calls (whether they are expressed with a letrec, named let, do, or other form).

([not] optimize-dead-local-variables)

Remove (or preserve) the dead local variables in the environment. Preserving the dead local variables is useful for debugging because continuations will contain the dead variables. Thus, if the code is also compiled with the declaration ‘debug-environments’ the ‘,e’, ‘,ed’, ‘,be’, and ‘,bed’ REPL commands will display the dead variables. On the other hand, preserving the dead local variables may change the space complexity of the program (i.e. some of the data that would normally be reclaimed by the garbage collector will not be). Note that due to other compiler optimizations some dead local variables may be removed regardless of this declaration.

(number-type primitive…)

Numeric arguments and result of the specified primitives are known to be of the given type (all primitives if none specified). number-type can be: ‘generic’, ‘fixnum’, or ‘flonum’.

(mostly-number-type primitive…)

Numeric arguments and result of the specified primitives are expected to be most often of the given type (all primitives if none specified). mostly-number-type can be: ‘mostly-generic’, ‘mostly-fixnum’, ‘mostly-fixnum-flonum’, ‘mostly-flonum’, or ‘mostly-flonum-fixnum’.

The default declarations used by the compiler are equivalent to:

 
(declare
  (gambit-scheme)
  (separate)
  (inline)
  (inline-primitives)
  (inlining-limit 350)
  (constant-fold)
  (lambda-lift)
  (not standard-bindings)
  (not extended-bindings)
  (run-time-bindings)
  (safe)
  (interrupts-enabled)
  (not debug)           ;; depends on debugging command line options
  (debug-location)      ;; depends on debugging command line options
  (debug-source)        ;; depends on debugging command line options
  (debug-environments)  ;; depends on debugging command line options
  (proper-tail-calls)
  (optimize-dead-local-variables)
  (generic)
  (mostly-fixnum-flonum)
)

These declarations are compatible with the semantics of R5RS Scheme and includes a few procedures from R6RS (mainly fixnum specific and flonum specific procedures). Typically used declarations that enhance performance, at the cost of violating the R5RS Scheme semantics, are: (standard-bindings), (block), (not safe) and (fixnum).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

6.4 Undocumented extensions

The procedures in this section are not yet documented.

(continuation? obj)procedure
(continuation-capture proc)procedure
(continuation-graft cont proc obj)procedure
(continuation-return cont obj)procedure

These procedures provide access to internal first-class continuations which are represented using continuation objects distinct from procedures.

The procedure continuation? returns #t when obj is a continuation object and #f otherwise.

The procedure continuation-capture is similar to the call/cc procedure but it represents the continuation with a continuation object. The proc parameter must be a procedure accepting a single argument. The procedure continuation-capture reifies its continuation and calls proc with the corresponding continuation object as its sole argument. Like for call/cc, the implicit continuation of the call to proc is the implicit continuation of the call to continuation-capture.

The procedure continuation-graft performs a procedure call to the procedure proc with arguments obj… and the implicit continuation corresponding to the continuation object cont. The current continuation of the call to procedure continuation-graft is ignored.

The procedure continuation-return invokes the implicit continuation corresponding to the continuation object cont with the result(s) obj…. This procedure can be easily defined in terms of continuation-graft:

 
(define (continuation-return cont . objs)
  (continuation-graft (lambda () (apply values objs))))

For example:

 
> (define x #f)
> (define p (make-parameter 11))
> (pp (parameterize ((p 22))
        (cons 33 (continuation-capture
                  (lambda (c) (set! x c) 44)))))
(33 . 44)
> x
#<continuation #2>
> (continuation-return x 55)
(33 . 55)
> (continuation-graft x (lambda () (expt 2 10)))
(33 . 1024)
> (continuation-graft x expt 2 10)
(33 . 1024)
> (continuation-graft x (lambda () (p)))
(33 . 22)
> (define (map-sqrt1 lst)
    (call/cc
     (lambda (k)
       (map (lambda (x)
              (if (< x 0)
                  (k 'error)
                  (sqrt x)))
            lst))))
> (map-sqrt1 '(1 4 9))
(1 2 3)
> (map-sqrt1 '(1 -1 9))
error
> (define (map-sqrt2 lst)
    (continuation-capture
     (lambda (c)
       (map (lambda (x)
              (if (< x 0)
                  (continuation-return c 'error)
                  (sqrt x)))
            lst))))
> (map-sqrt2 '(1 4 9))
(1 2 3)
> (map-sqrt2 '(1 -1 9))
error
(display-exception exc [port])procedure
(display-exception-in-context exc cont [port])procedure
(display-procedure-environment proc [port])procedure
(display-continuation-environment cont [port])procedure
(display-continuation-dynamic-environment cont [port])procedure
(display-continuation-backtrace cont [port [all-frames? [display-env? [max-head [max-tail [depth]]]]]])procedure

The procedure display-continuation-backtrace displays the frames of the continuation corresponding to the continuation object cont on the port port. If it is not specified, port defaults to the current output-port. The frames are displayed in the same format as the REPL’s ‘,b’ command.

The parameter all-frames?, which defaults to #f, controls which frames are displayed. Some frames of ancillary importance, such as internal frames created by the interpreter, are not displayed when all-frames? is #f. Otherwise all frames are displayed.

The parameter display-env?, which defaults to #f, controls if the frames are displayed with its environment (the variables accessible and their bindings).

The parameters max-head and max-tail, which default to 10 and 4 respectively, control how many frames are displayed at the head and tail of the continuation.

The parameter depth, which defaults to 0, causes the frame numbers to be offset by that value.

For example:

 
> (define x #f)
> (define (fib n)
    (if (< n 2)
        (continuation-capture
         (lambda (c) (set! x c) 1))
        (+ (fib (- n 1))
           (fib (- n 2)))))
> (fib 10)
89
> (display-continuation-backtrace x)
0  fib             (console)@7:12     (fib (- n 2))
1  fib             (console)@7:12     (fib (- n 2))
2  fib             (console)@7:12     (fib (- n 2))
3  fib             (console)@7:12     (fib (- n 2))
4  fib             (console)@7:12     (fib (- n 2))
5  (interaction)   (console)@8:1      (fib 10)
#f
> (display-continuation-backtrace x (current-output-port) #t)
0  fib             (console)@7:12     (fib (- n 2))
1  fib             (console)@6:9      (+ (fib (- n 1)) (fib (- ...
2  fib             (console)@7:12     (fib (- n 2))
3  fib             (console)@6:9      (+ (fib (- n 1)) (fib (- ...
4  fib             (console)@7:12     (fib (- n 2))
5  fib             (console)@6:9      (+ (fib (- n 1)) (fib (- ...
6  fib             (console)@7:12     (fib (- n 2))
7  fib             (console)@6:9      (+ (fib (- n 1)) (fib (- ...
8  fib             (console)@7:12     (fib (- n 2))
9  fib             (console)@6:9      (+ (fib (- n 1)) (fib (- ...
...
13 ##with-no-result-expected-toplevel 
14 ##repl-debug            
15 ##repl-debug-main       
16 ##kernel-handlers       
#f
> (display-continuation-backtrace x (current-output-port) #f #t)
0  fib             (console)@7:12     (fib (- n 2))
        n = 2
1  fib             (console)@7:12     (fib (- n 2))
        n = 4
2  fib             (console)@7:12     (fib (- n 2))
        n = 6
3  fib             (console)@7:12     (fib (- n 2))
        n = 8
4  fib             (console)@7:12     (fib (- n 2))
        n = 10
5  (interaction)   (console)@8:1      (fib 10)
#f
> (display-continuation-backtrace x (current-output-port) #f #f 2 1 100)
100 fib            (console)@7:12     (fib (- n 2))
101 fib            (console)@7:12     (fib (- n 2))
...
105 (interaction)  (console)@8:1      (fib 10)
#f
(make-thread-group [name [thread-group]])procedure
(thread-group? obj)procedure
(thread-group-name thread-group)procedure
(thread-group-parent thread-group)procedure
(thread-group-resume! thread-group)procedure
(thread-group-suspend! thread-group)procedure
(thread-group-terminate! thread-group)procedure
(thread-group->thread-group-list thread-group)procedure
(thread-group->thread-group-vector thread-group)procedure
(thread-group->thread-list thread-group)procedure
(thread-group->thread-vector thread-group)procedure
(thread-state thread)procedure
(thread-state-uninitialized? thread-state)procedure
(thread-state-initialized? thread-state)procedure
(thread-state-active? thread-state)procedure
(thread-state-active-waiting-for thread-state)procedure
(thread-state-active-timeout thread-state)procedure
(thread-state-normally-terminated? thread-state)procedure
(thread-state-normally-terminated-result thread-state)procedure
(thread-state-abnormally-terminated? thread-state)procedure
(thread-state-abnormally-terminated-reason thread-state)procedure
(top [thread-group [port]])procedure
(thread-interrupt! thread [thunk])procedure
(thread-suspend! thread)procedure
(thread-resume! thread)procedure
(thread-thread-group thread)procedure
(define-type-of-thread name field)special form
(thread-init! thread thunk [name [thread-group]])procedure
(initialized-thread-exception? obj)procedure
(initialized-thread-exception-procedure exc)procedure
(initialized-thread-exception-arguments exc)procedure
(uninitialized-thread-exception? obj)procedure
(uninitialized-thread-exception-procedure exc)procedure
(uninitialized-thread-exception-arguments exc)procedure
(inactive-thread-exception? obj)procedure
(inactive-thread-exception-procedure exc)procedure
(inactive-thread-exception-arguments exc)procedure
(rpc-remote-error-exception? obj)procedure
(rpc-remote-error-exception-procedure exc)procedure
(rpc-remote-error-exception-arguments exc)procedure
(rpc-remote-error-exception-message exc)procedure
(timeout->time timeout)procedure
(open-dummy)procedure
(port-settings-set! port settings)procedure
(input-port-bytes-buffered port)procedure
(input-port-characters-buffered port)procedure
(nonempty-input-port-character-buffer-exception? obj)procedure
(nonempty-input-port-character-buffer-exception-arguments exc)procedure
(nonempty-input-port-character-buffer-exception-procedure exc)procedure
(repl-input-port)procedure
(repl-output-port)procedure
(console-port)procedure
(current-user-interrupt-handler [handler])procedure
(defer-user-interrupts)procedure
(primordial-exception-handler exc)procedure
(err-code->string code)procedure
(foreign? obj)procedure
(foreign-tags foreign)procedure
(foreign-address foreign)procedure
(foreign-release! foreign)procedure
(foreign-released? foreign)procedure
(invalid-hash-number-exception? obj)procedure
(invalid-hash-number-exception-procedure exc)procedure
(invalid-hash-number-exception-arguments exc)procedure
(tcp-client-peer-socket-info tcp-client-port)procedure
(tcp-client-self-socket-info tcp-client-port)procedure
(tcp-server-socket-info tcp-server-port)procedure
(socket-info? obj)procedure
(socket-info-address socket-info)procedure
(socket-info-family socket-info)procedure
(socket-info-port-number socket-info)procedure
(system-version)procedure
(system-version-string)procedure
(system-type)procedure
(system-type-string)procedure
(configure-command-string)procedure
(system-stamp)procedure
(future expr)special form
(touch obj)procedure
(tty? obj)procedure
(tty-history tty)procedure
(tty-history-set! tty history)procedure
(tty-history-max-length-set! tty n)procedure
(tty-paren-balance-duration-set! tty duration)procedure
(tty-text-attributes-set! tty attributes)procedure
(tty-mode-set! tty mode)procedure
(tty-type-set! tty type)procedure
(with-input-from-port port thunk)procedure
(with-output-to-port port thunk)procedure
(input-port-char-position port)procedure
(output-port-char-position port)procedure
(open-event-queue n)procedure
(main)procedure
(define-record-type)special form
(define-type)special form
(namespace)special form
(this-source-file)special form
(receive)special form
(cond-expand)special form
(define-cond-expand-feature ident)special form
(finite? x)procedure
(infinite? x)procedure
(nan? x)procedure
(six.!)undefined
(six.!x x)special form
(six.&x x)special form
(six.*x x)special form
(six.++x x)special form
(six.+x x)special form
(six.--x x)special form
(six.-x x)special form
(six.arrow expr ident)special form
(six.break)undefined
(six.call func arg)special form
(six.case)undefined
(six.clause)undefined
(six.compound statement)special form
(six.cons x y)special form
(six.continue)undefined
(six.define-procedure ident proc)special form
(six.define-variable ident type dims init)special form
(six.do-while stat expr)special form
(six.dot expr ident)special form
(six.for stat1 expr2 expr3 stat2)special form
(six.goto)undefined
(six.identifier ident)special form
(six.if expr stat1 [stat2])special form
(six.index expr1 expr2)special form
(six.label)undefined
(six.list x y)special form
(six.literal value)special form
(six.make-array init dim)procedure
(six.new ident arg)special form
(six.null)special form
(six.prefix datum)special form
(six.procedure type params stat)special form
(six.procedure-body stat)special form
(six.return)undefined
(six.switch)undefined
(six.while expr stat)special form
(six.x!=y x y)special form
(six.x%=y x y)special form
(six.x%y x y)special form
(six.x&&y x y)special form
(six.x&=y x y)special form
(six.x&y x y)special form
(six.x*=y x y)special form
(six.x*y x y)special form
(six.x++ x)special form
(six.x+=y x y)special form
(six.x+y x y)special form
(|six.x,y| x y)special form
(six.x-- x)special form
(six.x-=y x y)special form
(six.x-y x y)special form
(six.x/=y x y)special form
(six.x/y x y)special form
(six.x:-y x y)undefined
(six.x:=y x y)special form
(six.x:y x y)special form
(six.x<<=y x y)special form
(six.x<<y x y)special form
(six.x<=y x y)special form
(six.x<y x y)special form
(six.x==y x y)special form
(six.x=y x y)special form
(six.x>=y x y)special form
(six.x>>=y x y)special form
(six.x>>y x y)special form
(six.x>y x y)special form
(six.x?y:z x y z)special form
(six.x^=y x y)special form
(six.x^y x y)special form
(|six.x\|=y| x y)special form
(|six.x\|y| x y)special form
(|six.x\|\|y| x y)special form
(six.~x x)special form

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

7. Namespaces

TO DO!


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

8. Characters and strings

Gambit supports the Unicode character encoding standard. Scheme characters can be any of the characters whose Unicode encoding is in the range 0 to #x10ffff (inclusive) but not in the range #xd800 to #xdfff. Source code can also contain any Unicode character, however to read such source code properly gsi and gsc must be told which character encoding to use for reading the source code (i.e. ASCII, ISO-8859-1, UTF-8, etc). This can be done by specifying the runtime option ‘-:f’ when gsi and gsc are started.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

8.1 Extensions to character procedures

(char->integer char)procedure
(integer->char n)procedure

The procedure char->integer returns the Unicode encoding of the character char.

The procedure integer->char returns the character whose Unicode encoding is the exact integer n.

For example:

 
> (char->integer #\!)
33
> (integer->char 65)
#\A
> (integer->char (char->integer #\u1234))
#\u1234
> (integer->char #xd800)
*** ERROR IN (console)@4.1 -- (Argument 1) Out of range
(integer->char 55296)
(char=? char1)procedure
(char<? char1)procedure
(char>? char1)procedure
(char<=? char1)procedure
(char>=? char1)procedure
(char-ci=? char1)procedure
(char-ci<? char1)procedure
(char-ci>? char1)procedure
(char-ci<=? char1)procedure
(char-ci>=? char1)procedure

These procedures take any number of arguments including no argument. This is useful to test if the elements of a list are sorted in a particular order. For example, testing that the list of characters lst is sorted in nondecreasing order can be done with the call (apply char<? lst).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

8.2 Extensions to string procedures

(string=? string1)procedure
(string<? string1)procedure
(string>? string1)procedure
(string<=? string1)procedure
(string>=? string1)procedure
(string-ci=? string1)procedure
(string-ci<? string1)procedure
(string-ci>? string1)procedure
(string-ci<=? string1)procedure
(string-ci>=? string1)procedure

These procedures take any number of arguments including no argument. This is useful to test if the elements of a list are sorted in a particular order. For example, testing that the list of strings lst is sorted in nondecreasing order can be done with the call (apply string<? lst).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9. Numbers


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9.1 Extensions to numeric procedures

(= z1)procedure
(< x1)procedure
(> x1)procedure
(<= x1)procedure
(>= x1)procedure

These procedures take any number of arguments including no argument. This is useful to test if the elements of a list are sorted in a particular order. For example, testing that the list of numbers lst is sorted in nondecreasing order can be done with the call (apply < lst).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9.2 IEEE floating point arithmetic

To better conform to IEEE floating point arithmetic the standard numeric tower is extended with these special inexact reals:

+inf.0

positive infinity

-inf.0

negative infinity

+nan.0

“not a number”

-0.

negative zero (‘0.’ is the positive zero)

The infinities and “not a number” are reals (i.e. (real? +inf.0) is #t) but are not rational (i.e. (rational? +inf.0) is #f).

Both zeros are numerically equal (i.e. (= -0. 0.) is #t) but are not equivalent (i.e. (eqv? -0. 0.) and (equal? -0. 0.) are #f). All numerical comparisons with “not a number”, including (= +nan.0 +nan.0), are #f.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9.3 Integer square root and nth root

(integer-sqrt n)procedure

This procedure returns the integer part of the square root of the nonnegative exact integer n.

For example:

 
> (integer-sqrt 123)
11
(integer-nth-root n1 n2)procedure

This procedure returns the integer part of n1 raised to the power 1/n2, where n1 is a nonnegative exact integer and n2 is a positive exact integer.

For example:

 
> (integer-nth-root 100 3)
4

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9.4 Bitwise-operations on exact integers

The procedures defined in this section are compatible with the withdrawn “Integer Bitwise-operation Library SRFI” (SRFI 33). Note that some of the procedures specified in SRFI 33 are not provided.

Most procedures in this section are specified in terms of the binary representation of exact integers. The two’s complement representation is assumed where an integer is composed of an infinite number of bits. The upper section of an integer (the most significant bits) are either an infinite sequence of ones when the integer is negative, or they are an infinite sequence of zeros when the integer is nonnegative.

(arithmetic-shift n1 n2)procedure

This procedure returns n1 shifted to the left by n2 bits, that is (floor (* n1 (expt 2 n2))). Both n1 and n2 must be exact integers.

For example:

 
> (arithmetic-shift 1000 7)  ; n1=...0000001111101000
128000
> (arithmetic-shift 1000 -6) ; n1=...0000001111101000
15
> (arithmetic-shift -23 -3)  ; n1=...1111111111101001
-3
(bitwise-merge n1 n2 n3)procedure

This procedure returns an exact integer whose bits combine the bits from n2 and n3 depending on n1. The bit at index i of the result depends only on the bits at index i in n1, n2 and n3: it is equal to the bit in n2 when the bit in n1 is 0 and it is equal to the bit in n3 when the bit in n1 is 1. All arguments must be exact integers.

For example:

 
> (bitwise-merge -4 -11 10) ; ...11111100 ...11110101 ...00001010
9
> (bitwise-merge 12 -11 10) ; ...00001100 ...11110101 ...00001010
-7
(bitwise-and n)procedure

This procedure returns the bitwise “and” of the exact integers n…. The value -1 is returned when there are no arguments.

For example:

 
> (bitwise-and 6 12)  ; ...00000110 ...00001100
4
> (bitwise-and 6 -4)  ; ...00000110 ...11111100
4
> (bitwise-and -6 -4) ; ...11111010 ...11111100
-8
> (bitwise-and)
-1
(bitwise-ior n)procedure

This procedure returns the bitwise “inclusive-or” of the exact integers n…. The value 0 is returned when there are no arguments.

For example:

 
> (bitwise-ior 6 12)  ; ...00000110 ...00001100
14
> (bitwise-ior 6 -4)  ; ...00000110 ...11111100
-2
> (bitwise-ior -6 -4) ; ...11111010 ...11111100
-2
> (bitwise-ior)
0
(bitwise-xor n)procedure

This procedure returns the bitwise “exclusive-or” of the exact integers n…. The value 0 is returned when there are no arguments.

For example:

 
> (bitwise-xor 6 12)  ; ...00000110 ...00001100
10
> (bitwise-xor 6 -4)  ; ...00000110 ...11111100
-6
> (bitwise-xor -6 -4) ; ...11111010 ...11111100
6
> (bitwise-xor)
0
(bitwise-not n)procedure

This procedure returns the bitwise complement of the exact integer n.

For example:

 
> (bitwise-not 3)  ; ...00000011
-4
> (bitwise-not -1) ; ...11111111
0
(bit-count n)procedure

This procedure returns the bit count of the exact integer n. If n is nonnegative, the bit count is the number of 1 bits in the two’s complement representation of n. If n is negative, the bit count is the number of 0 bits in the two’s complement representation of n.

For example:

 
> (bit-count 0)   ; ...00000000
0
> (bit-count 1)   ; ...00000001
1
> (bit-count 2)   ; ...00000010
1
> (bit-count 3)   ; ...00000011
2
> (bit-count 4)   ; ...00000100
1
> (bit-count -23) ; ...11101001
3
(integer-length n)procedure

This procedure returns the bit length of the exact integer n. If n is a positive integer the bit length is one more than the index of the highest 1 bit (the least significant bit is at index 0). If n is a negative integer the bit length is one more than the index of the highest 0 bit. If n is zero, the bit length is 0.

For example:

 
> (integer-length 0)   ; ...00000000
0
> (integer-length 1)   ; ...00000001
1
> (integer-length 2)   ; ...00000010
2
> (integer-length 3)   ; ...00000011
2
> (integer-length 4)   ; ...00000100
3
> (integer-length -23) ; ...11101001
5
(bit-set? n1 n2)procedure

This procedure returns a boolean indicating if the bit at index n1 of n2 is set (i.e. equal to 1) or not. Both n1 and n2 must be exact integers, and n1 must be nonnegative.

For example:

 
> (map (lambda (i) (bit-set? i -23)) ; ...11101001
       '(7 6 5 4 3 2 1 0))
(#t #t #t #f #t #f #f #t)
(any-bits-set? n1 n2)procedure

This procedure returns a boolean indicating if the bitwise and of n1 and n2 is different from zero or not. This procedure is implemented more efficiently than the naive definition:

 
(define (any-bits-set? n1 n2) (not (zero? (bitwise-and n1 n2))))

For example:

 
> (any-bits-set? 5 10)   ; ...00000101 ...00001010
#f
> (any-bits-set? -23 32) ; ...11101001 ...00100000
#t
(all-bits-set? n1 n2)procedure

This procedure returns a boolean indicating if the bitwise and of n1 and n2 is equal to n1 or not. This procedure is implemented more efficiently than the naive definition:

 
(define (all-bits-set? n1 n2) (= n1 (bitwise-and n1 n2)))

For example:

 
> (all-bits-set? 1 3) ; ...00000001 ...00000011
#t
> (all-bits-set? 7 3) ; ...00000111 ...00000011
#f
(first-bit-set n)procedure

This procedure returns the bit index of the least significant bit of n equal to 1 (which is also the number of 0 bits that are below the least significant 1 bit). This procedure returns -1 when n is zero.

For example:

 
> (first-bit-set 24) ; ...00011000
3
> (first-bit-set 0)  ; ...00000000
-1
(extract-bit-field n1 n2 n3)procedure
(test-bit-field? n1 n2 n3)procedure
(clear-bit-field n1 n2 n3)procedure
(replace-bit-field n1 n2 n3 n4)procedure
(copy-bit-field n1 n2 n3 n4)procedure

These procedures operate on a bit-field which is n1 bits wide starting at bit index n2. All arguments must be exact integers and n1 and n2 must be nonnegative.

The procedure extract-bit-field returns the bit-field of n3 shifted to the right so that the least significant bit of the bit-field is the least significant bit of the result.

The procedure test-bit-field? returns #t if any bit in the bit-field of n3 is equal to 1, otherwise #f is returned.

The procedure clear-bit-field returns n3 with all bits in the bit-field replaced with 0.

The procedure replace-bit-field returns n4 with the bit-field replaced with the least-significant n1 bits of n3.

The procedure copy-bit-field returns n4 with the bit-field replaced with the (same index and size) bit-field in n3.

For example:

 
> (extract-bit-field 5 2 -37)    ; ...11011011
22
> (test-bit-field? 5 2 -37)      ; ...11011011
#t
> (test-bit-field? 1 2 -37)      ; ...11011011
#f
> (clear-bit-field 5 2 -37)      ; ...11011011
-125
> (replace-bit-field 5 2 -6 -37) ; ...11111010 ...11011011
-21
> (copy-bit-field 5 2 -6 -37)    ; ...11111010 ...11011011
-5

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9.5 Fixnum specific operations

(fixnum? obj)procedure
(fx* n1)procedure
(fx+ n1)procedure
(fx- n1 n2)procedure
(fx< n1)procedure
(fx<= n1)procedure
(fx= n1)procedure
(fx> n1)procedure
(fx>= n1)procedure
(fxabs n)procedure
(fxand n1)procedure
(fxarithmetic-shift n1 n2)procedure
(fxarithmetic-shift-left n1 n2)procedure
(fxarithmetic-shift-right n1 n2)procedure
(fxbit-count n)procedure
(fxbit-set? n1 n2)procedure
(fxeven? n)procedure
(fxfirst-bit-set n)procedure
(fxif n1 n2 n3)procedure
(fxior n1)procedure
(fxlength n)procedure
(fxmax n1 n2)procedure
(fxmin n1 n2)procedure
(fxmodulo n1 n2)procedure
(fxnegative? n)procedure
(fxnot n)procedure
(fxodd? n)procedure
(fxpositive? n)procedure
(fxquotient n1 n2)procedure
(fxremainder n1 n2)procedure
(fxwrap* n1)procedure
(fxwrap+ n1)procedure
(fxwrap- n1 n2)procedure
(fxwrapabs n)procedure
(fxwraparithmetic-shift n1 n2)procedure
(fxwraparithmetic-shift-left n1 n2)procedure
(fxwraplogical-shift-right n1 n2)procedure
(fxwrapquotient n1 n2)procedure
(fxxor n1)procedure
(fxzero? n)procedure
(fixnum-overflow-exception? obj)procedure
(fixnum-overflow-exception-procedure exc)procedure
(fixnum-overflow-exception-arguments exc)procedure

Fixnum-overflow-exception objects are raised by some of the fixnum specific procedures when the result is larger than can fit in a fixnum. The parameter exc must be a fixnum-overflow-exception object.

The procedure fixnum-overflow-exception? returns #t when obj is a fixnum-overflow-exception object and #f otherwise.

The procedure fixnum-overflow-exception-procedure returns the procedure that raised exc.

The procedure fixnum-overflow-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (fixnum-overflow-exception? exc)
        (list (fixnum-overflow-exception-procedure exc)
              (fixnum-overflow-exception-arguments exc))
        'not-fixnum-overflow-exception))
> (with-exception-catcher
    handler
    (lambda () (fx* 100000 100000)))
(#<procedure #2 fx*> (100000 100000))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9.6 Flonum specific operations

(flonum? obj)procedure
(fixnum->flonum n)procedure
(fl* x1)procedure
(fl+ x1)procedure
(fl- x1 x2)procedure
(fl/ x1 x2)procedure
(fl< x1)procedure
(fl<= x1)procedure
(fl= x1)procedure
(fl> x1)procedure
(fl>= x1)procedure
(flabs x)procedure
(flacos x)procedure
(flasin x)procedure
(flatan x)procedure
(flatan y x)procedure
(flceiling x)procedure
(flcos x)procedure
(fldenominator x)procedure
(fleven? x)procedure
(flexp x)procedure
(flexpt x y)procedure
(flfinite? x)procedure
(flfloor x)procedure
(flinfinite? x)procedure
(flinteger? x)procedure
(fllog x)procedure
(flmax x1 x2)procedure
(flmin x1 x2)procedure
(flnan? x)procedure
(flnegative? x)procedure
(flnumerator x)procedure
(flodd? x)procedure
(flpositive? x)procedure
(flround x)procedure
(flsin x)procedure
(flsqrt x)procedure
(fltan x)procedure
(fltruncate x)procedure
(flzero? x)procedure

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

9.7 Pseudo random numbers

The procedures and variables defined in this section are compatible with the “Sources of Random Bits SRFI” (SRFI 27). The implementation is based on Pierre L’Ecuyer’s MRG32k3a pseudo random number generator. At the heart of SRFI 27’s interface is the random source type which encapsulates the state of a pseudo random number generator. The state of a random source object changes every time a pseudo random number is generated from this random source object.

(default-random-source)variable

The global variable default-random-source is bound to the random source object which is used by the random-integer, random-real, random-u8vector and random-f64vector procedures.

(random-integer n)procedure

This procedure returns a pseudo random exact integer in the range 0 to n-1. The random source object in the global variable default-random-source is used to generate this number. The parameter n must be a positive exact integer.

For example:

 
> (random-integer 100)
24
> (random-integer 100)
2
> (random-integer 10000000000000000000000000000000000000000)
6143360270902284438072426748425263488507
(random-real)procedure

This procedure returns a pseudo random inexact real between, but not including, 0 and 1. The random source object in the global variable default-random-source is used to generate this number.

For example:

 
> (random-real)
.24230672079133753
> (random-real)
.02317001922506932
(random-u8vector n)procedure

This procedure returns a u8vector of length n containing pseudo random exact integers in the range 0 to 255. The random source object in the global variable default-random-source is used to generate these numbers. The parameter n must be a nonnegative exact integer.

For example:

 
> (random-u8vector 10)
#u8(200 53 29 202 3 85 208 187 73 219)
(random-f64vector n)procedure

This procedure returns a f64vector of length n containing pseudo random inexact reals between, but not including, 0 and 1. The random source object in the global variable default-random-source is used to generate these numbers. The parameter n must be a nonnegative exact integer.

For example:

 
> (random-f64vector 3)
#f64(.7145854494613069 .47089632669147946 .5400124875182746)
(make-random-source)procedure

This procedure returns a new random source object initialized to a predetermined state (to initialize to a pseudo random state the procedure random-source-randomize! should be called).

For example:

 
> (define rs (make-random-source))
> ((random-source-make-integers rs) 10000000)
8583952
(random-source? obj)procedure

This procedure returns #t when obj is a random source object and #f otherwise.

For example:

 
> (random-source? default-random-source)
#t
> (random-source? 123)
#f
(random-source-state-ref random-source)procedure
(random-source-state-set! random-source state)procedure

The procedure random-source-state-ref extracts the state of the random source object random-source and returns a vector containing the state.

The procedure random-source-state-set! restores the state of the random source object random-source to state which must be a vector returned from a call to the procedure random-source-state-ref.

For example:

 
> (define s (random-source-state-ref default-random-source))
> (random-integer 10000000000000000000000000000000000000000)
7583880188903074396261960585615270693321
> (random-source-state-set! default-random-source s)
> (random-integer 10000000000000000000000000000000000000000)
7583880188903074396261960585615270693321
(random-source-randomize! random-source)procedure
(random-source-pseudo-randomize! random-source i j)procedure

These procedures change the state of the random source object random-source. The procedure random-source-randomize! sets the random source object to a state that depends on the current time (which for typical uses can be considered to randomly initialize the state). The procedure random-source-pseudo-randomize! sets the random source object to a state that is determined only by the current state and the nonnegative exact integers i and j. For both procedures the value returned is unspecified.

For example:

 
> (define s (random-source-state-ref default-random-source))
> (random-source-pseudo-randomize! default-random-source 5 99)
> (random-integer 10000000000000000000000000000000000000000)
9816755163910623041601722050112674079767
> (random-source-state-set! default-random-source s)
> (random-source-pseudo-randomize! default-random-source 5 99)
> (random-integer 10000000000000000000000000000000000000000)
9816755163910623041601722050112674079767
> (random-source-pseudo-randomize! default-random-source 5 99)
> (random-integer 10000000000000000000000000000000000000000)
9816755163910623041601722050112674079767
> (random-source-state-set! default-random-source s)
> (random-source-randomize! default-random-source)
> (random-integer 10000000000000000000000000000000000000000)
2271441220851914333384493143687768110622
> (random-source-state-set! default-random-source s)
> (random-source-randomize! default-random-source)
> (random-integer 10000000000000000000000000000000000000000)
6247966138948323029033944059178072366895
(random-source-make-integers random-source)procedure

This procedure returns a procedure for generating pseudo random exact integers using the random source object random-source. The returned procedure accepts a single parameter n, a positive exact integer, and returns a pseudo random exact integer in the range 0 to n-1.

For example:

 
> (define rs (make-random-source))
> (define ri (random-source-make-integers rs))
> (ri 10000000)
8583952
> (ri 10000000)
2879793
(random-source-make-reals random-source [precision])procedure

This procedure returns a procedure for generating pseudo random inexact reals using the random source object random-source. The returned procedure accepts no parameters and returns a pseudo random inexact real between, but not including, 0 and 1. The optional parameter precision specifies an upper bound on the minimum amount by which two generated pseudo-random numbers can be separated.

For example:

 
> (define rs (make-random-source))
> (define rr (random-source-make-reals rs))
> (rr)
.857402537562821
> (rr)
.2876463473845367
(random-source-make-u8vectors random-source)procedure

This procedure returns a procedure for generating pseudo random u8vectors using the random source object random-source. The returned procedure accepts a single parameter n, a nonnegative exact integer, and returns a u8vector of length n containing pseudo random exact integers in the range 0 to 255.

For example:

 
> (define rs (make-random-source))
> (define rv (random-source-make-u8vectors rs))
> (rv 10)
#u8(200 53 29 202 3 85 208 187 73 219)
> (rv 10)
#u8(113 8 182 120 138 103 53 192 40 176)
(random-source-make-f64vectors random-source [precision])procedure

This procedure returns a procedure for generating pseudo random f64vectors using the random source object random-source. The returned procedure accepts a single parameter n, a nonnegative exact integer, and returns an f64vector of length n containing pseudo random inexact reals between, but not including, 0 and 1. The optional parameter precision specifies an upper bound on the minimum amount by which two generated pseudo-random numbers can be separated.

For example:

 
> (define rs (make-random-source))
> (define rv (random-source-make-f64vectors rs))
> (rv 3)
#f64(.7342236104231586 .2876463473845367 .8574025375628211)
> (rv 3)
#f64(.013863292728449427 .33449296573515447 .8162050798467028)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

10. Homogeneous vectors

Homogeneous vectors are vectors containing raw numbers of the same type (signed or unsigned exact integers or inexact reals). There are 10 types of homogeneous vectors: ‘s8vector’ (vector of exact integers in the range -2^7 to 2^7-1), ‘u8vector’ (vector of exact integers in the range 0 to 2^8-1), ‘s16vector’ (vector of exact integers in the range -2^15 to 2^15-1), ‘u16vector’ (vector of exact integers in the range 0 to 2^16-1), ‘s32vector’ (vector of exact integers in the range -2^31 to 2^31-1), ‘u32vector’ (vector of exact integers in the range 0 to 2^32-1), ‘s64vector’ (vector of exact integers in the range -2^63 to 2^63-1), ‘u64vector’ (vector of exact integers in the range 0 to 2^64-1), ‘f32vector’ (vector of 32 bit floating point numbers), and ‘f64vector’ (vector of 64 bit floating point numbers).

The lexical syntax of homogeneous vectors is specified in Homogeneous vector syntax.

The procedures available for homogeneous vectors, listed below, are the analog of the normal vector/string procedures for each of the homogeneous vector types.

(s8vector? obj)procedure
(make-s8vector k [fill])procedure
(s8vector exact-int8)procedure
(s8vector-length s8vector)procedure
(s8vector-ref s8vector k)procedure
(s8vector-set! s8vector k exact-int8)procedure
(s8vector->list s8vector)procedure
(list->s8vector list-of-exact-int8)procedure
(s8vector-fill! s8vector fill)procedure
(subs8vector-fill! vector start end fill)procedure
(append-s8vectors lst)procedure
(s8vector-copy s8vector)procedure
(s8vector-append s8vector)procedure
(subs8vector s8vector start end)procedure
(subs8vector-move! src-s8vector src-start src-end dst-s8vector dst-start)procedure
(s8vector-shrink! s8vector k)procedure
(u8vector? obj)procedure
(make-u8vector k [fill])procedure
(u8vector exact-int8)procedure
(u8vector-length u8vector)procedure
(u8vector-ref u8vector k)procedure
(u8vector-set! u8vector k exact-int8)procedure
(u8vector->list u8vector)procedure
(list->u8vector list-of-exact-int8)procedure
(u8vector-fill! u8vector fill)procedure
(subu8vector-fill! vector start end fill)procedure
(append-u8vectors lst)procedure
(u8vector-copy u8vector)procedure
(u8vector-append u8vector)procedure
(subu8vector u8vector start end)procedure
(subu8vector-move! src-u8vector src-start src-end dst-u8vector dst-start)procedure
(u8vector-shrink! u8vector k)procedure
(s16vector? obj)procedure
(make-s16vector k [fill])procedure
(s16vector exact-int16)procedure
(s16vector-length s16vector)procedure
(s16vector-ref s16vector k)procedure
(s16vector-set! s16vector k exact-int16)procedure
(s16vector->list s16vector)procedure
(list->s16vector list-of-exact-int16)procedure
(s16vector-fill! s16vector fill)procedure
(subs16vector-fill! vector start end fill)procedure
(append-s16vectors lst)procedure
(s16vector-copy s16vector)procedure
(s16vector-append s16vector)procedure
(subs16vector s16vector start end)procedure
(subs16vector-move! src-s16vector src-start src-end dst-s16vector dst-start)procedure
(s16vector-shrink! s16vector k)procedure
(u16vector? obj)procedure
(make-u16vector k [fill])procedure
(u16vector exact-int16)procedure
(u16vector-length u16vector)procedure
(u16vector-ref u16vector k)procedure
(u16vector-set! u16vector k exact-int16)procedure
(u16vector->list u16vector)procedure
(list->u16vector list-of-exact-int16)procedure
(u16vector-fill! u16vector fill)procedure
(subu16vector-fill! vector start end fill)procedure
(append-u16vectors lst)procedure
(u16vector-copy u16vector)procedure
(u16vector-append u16vector)procedure
(subu16vector u16vector start end)procedure
(subu16vector-move! src-u16vector src-start src-end dst-u16vector dst-start)procedure
(u16vector-shrink! u16vector k)procedure
(s32vector? obj)procedure
(make-s32vector k [fill])procedure
(s32vector exact-int32)procedure
(s32vector-length s32vector)procedure
(s32vector-ref s32vector k)procedure
(s32vector-set! s32vector k exact-int32)procedure
(s32vector->list s32vector)procedure
(list->s32vector list-of-exact-int32)procedure
(s32vector-fill! s32vector fill)procedure
(subs32vector-fill! vector start end fill)procedure
(append-s32vectors lst)procedure
(s32vector-copy s32vector)procedure
(s32vector-append s32vector)procedure
(subs32vector s32vector start end)procedure
(subs32vector-move! src-s32vector src-start src-end dst-s32vector dst-start)procedure
(s32vector-shrink! s32vector k)procedure
(u32vector? obj)procedure
(make-u32vector k [fill])procedure
(u32vector exact-int32)procedure
(u32vector-length u32vector)procedure
(u32vector-ref u32vector k)procedure
(u32vector-set! u32vector k exact-int32)procedure
(u32vector->list u32vector)procedure
(list->u32vector list-of-exact-int32)procedure
(u32vector-fill! u32vector fill)procedure
(subu32vector-fill! vector start end fill)procedure
(append-u32vectors lst)procedure
(u32vector-copy u32vector)procedure
(u32vector-append u32vector)procedure
(subu32vector u32vector start end)procedure
(subu32vector-move! src-u32vector src-start src-end dst-u32vector dst-start)procedure
(u32vector-shrink! u32vector k)procedure
(s64vector? obj)procedure
(make-s64vector k [fill])procedure
(s64vector exact-int64)procedure
(s64vector-length s64vector)procedure
(s64vector-ref s64vector k)procedure
(s64vector-set! s64vector k exact-int64)procedure
(s64vector->list s64vector)procedure
(list->s64vector list-of-exact-int64)procedure
(s64vector-fill! s64vector fill)procedure
(subs64vector-fill! vector start end fill)procedure
(append-s64vectors lst)procedure
(s64vector-copy s64vector)procedure
(s64vector-append s64vector)procedure
(subs64vector s64vector start end)procedure
(subs64vector-move! src-s64vector src-start src-end dst-s64vector dst-start)procedure
(s64vector-shrink! s64vector k)procedure
(u64vector? obj)procedure
(make-u64vector k [fill])procedure
(u64vector exact-int64)procedure
(u64vector-length u64vector)procedure
(u64vector-ref u64vector k)procedure
(u64vector-set! u64vector k exact-int64)procedure
(u64vector->list u64vector)procedure
(list->u64vector list-of-exact-int64)procedure
(u64vector-fill! u64vector fill)procedure
(subu64vector-fill! vector start end fill)procedure
(append-u64vectors lst)procedure
(u64vector-copy u64vector)procedure
(u64vector-append u64vector)procedure
(subu64vector u64vector start end)procedure
(subu64vector-move! src-u64vector src-start src-end dst-u64vector dst-start)procedure
(u64vector-shrink! u64vector k)procedure
(f32vector? obj)procedure
(make-f32vector k [fill])procedure
(f32vector inexact-real)procedure
(f32vector-length f32vector)procedure
(f32vector-ref f32vector k)procedure
(f32vector-set! f32vector k inexact-real)procedure
(f32vector->list f32vector)procedure
(list->f32vector list-of-inexact-real)procedure
(f32vector-fill! f32vector fill)procedure
(subf32vector-fill! vector start end fill)procedure
(append-f32vectors lst)procedure
(f32vector-copy f32vector)procedure
(f32vector-append f32vector)procedure
(subf32vector f32vector start end)procedure
(subf32vector-move! src-f32vector src-start src-end dst-f32vector dst-start)procedure
(f32vector-shrink! f32vector k)procedure
(f64vector? obj)procedure
(make-f64vector k [fill])procedure
(f64vector inexact-real)procedure
(f64vector-length f64vector)procedure
(f64vector-ref f64vector k)procedure
(f64vector-set! f64vector k inexact-real)procedure
(f64vector->list f64vector)procedure
(list->f64vector list-of-inexact-real)procedure
(f64vector-fill! f64vector fill)procedure
(subf64vector-fill! vector start end fill)procedure
(append-f64vectors lst)procedure
(f64vector-copy f64vector)procedure
(f64vector-append f64vector)procedure
(subf64vector f64vector start end)procedure
(subf64vector-move! src-f64vector src-start src-end dst-f64vector dst-start)procedure
(f64vector-shrink! f64vector k)procedure

For example:

 
> (define v (u8vector 10 255 13))
> (u8vector-set! v 2 99)
> v
#u8(10 255 99)
> (u8vector-ref v 1)
255
> (u8vector->list v)
(10 255 99)
> (u8vector-shrink! v 2)
> (v)
#u8(10 255)
(object->u8vector obj [encoder])procedure
(u8vector->object u8vector [decoder])procedure

The procedure object->u8vector returns a u8vector that contains the sequence of bytes that encodes the object obj. The procedure u8vector->object decodes the sequence of bytes contained in the u8vector u8vector, which was produced by the procedure object->u8vector, and reconstructs an object structurally equal to the original object. In other words the procedures object->u8vector and u8vector->object respectively perform serialization and deserialization of Scheme objects. Note that some objects are non-serializable (e.g. threads, wills, some types of ports, and any object containing a non-serializable object).

The optional encoder and decoder parameters are single parameter procedures which default to the identity function. The encoder procedure is called during serialization. As the serializer walks through obj, it calls the encoder procedure on each sub-object X that is encountered. The encoder transforms the object X into an object Y that will be serialized instead of X. Similarly the decoder procedure is called during deserialization. When an object Y is encountered, the decoder procedure is called to transform it into the object X that is the result of deserialization.

The encoder and decoder procedures are useful to customize the serialized representation of objects. In particular, it can be used to define the semantics of serializing objects, such as threads and ports, that would otherwise not be serializable. The decoder procedure is typically the inverse of the encoder procedure, i.e. (decoder (encoder X)) = X.

For example:

 
> (define (make-adder x) (lambda (y) (+ x y)))
> (define f (make-adder 10))
> (define a (object->u8vector f))
> (define b (u8vector->object a))
> (u8vector-length a)
1639
> (f 5)
15
> (b 5)
15
> (pp b)
(lambda (y) (+ x y))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

11. Hashing and weak references


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

11.1 Hashing

(object->serial-number obj)procedure
(serial-number->object n [default])procedure

All Scheme objects are uniquely identified with a serial number which is a nonnegative exact integer. The object->serial-number procedure returns the serial number of object obj. This serial number is only allocated the first time the object->serial-number procedure is called on that object. Objects which do not have an external textual representation that can be read by the read procedure, use an external textual representation that includes a serial number of the form #n. Consequently, the procedures write, pretty-print, etc will call the object->serial-number procedure to get the serial number, and this may cause the serial number to be allocated.

The serial-number->object procedure takes an exact integer parameter n and returns the object whose serial number is n. If no object currently exists with that serial number, default is returned if it is specified, otherwise an unbound-serial-number-exception object is raised. The reader defines the following abbreviation for calling serial-number->object: the syntax #n, where n is a sequence of decimal digits and it is not followed by ‘=’ or ‘#’, is equivalent to the list (serial-number->object n).

For example:

 
> (define z (list (lambda (x) (* x x)) (lambda (y) (/ 1 y))))
> z
(#<procedure #2> #<procedure #3>)
> (#3 10)
1/10
> '(#3 10)
((serial-number->object 3) 10)
> car
#<procedure #4 car>
> (#4 z)
#<procedure #2>
(unbound-serial-number-exception? obj)procedure
(unbound-serial-number-exception-procedure exc)procedure
(unbound-serial-number-exception-arguments exc)procedure

Unbound-serial-number-exception objects are raised by the procedure serial-number->object when no object currently exists with that serial number. The parameter exc must be an unbound-serial-number-exception object.

The procedure unbound-serial-number-exception? returns #t when obj is a unbound-serial-number-exception object and #f otherwise.

The procedure unbound-serial-number-exception-procedure returns the procedure that raised exc.

The procedure unbound-serial-number-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (unbound-serial-number-exception? exc)
        (list (unbound-serial-number-exception-procedure exc)
              (unbound-serial-number-exception-arguments exc))
        'not-unbound-serial-number-exception))
> (with-exception-catcher
    handler
    (lambda () (serial-number->object 1000)))
(#<procedure #2 serial-number->object> (1000))
(symbol-hash symbol)procedure

The symbol-hash procedure returns the hash number of the symbol symbol. The hash number is a small exact integer (fixnum). When symbol is an interned symbol the value returned is the same as (string=?-hash (symbol->string symbol)).

For example:

 
> (symbol-hash 'car)
444471047
(keyword-hash keyword)procedure

The keyword-hash procedure returns the hash number of the keyword keyword. The hash number is a small exact integer (fixnum). When keyword is an interned keyword the value returned is the same as (string=?-hash (keyword->string keyword)).

For example:

 
> (keyword-hash car:)
444471047
(string=?-hash string)procedure

The string=?-hash procedure returns the hash number of the string string. The hash number is a small exact integer (fixnum). For any two strings s1 and s2, (string=? s1 s2) implies (= (string=?-hash s1) (string=?-hash s2)).

For example:

 
> (string=?-hash "car")
444471047
(string-ci=?-hash string)procedure

The string-ci=?-hash procedure returns the hash number of the string string. The hash number is a small exact integer (fixnum). For any two strings s1 and s2, (string-ci=? s1 s2) implies (= (string-ci=?-hash s1) (string-ci=?-hash s2)).

For example:

 
> (string-ci=?-hash "CaR")
444471047
(eq?-hash obj)procedure

The eq?-hash procedure returns the hash number of the object obj. The hash number is a small exact integer (fixnum). For any two objects o1 and o2, (eq? o1 o2) implies (= (eq?-hash o1) (eq?-hash o2)).

For example:

 
> (eq?-hash #t)
536870910
(eqv?-hash obj)procedure

The eqv?-hash procedure returns the hash number of the object obj. The hash number is a small exact integer (fixnum). For any two objects o1 and o2, (eqv? o1 o2) implies (= (eqv?-hash o1) (eqv?-hash o2)).

For example:

 
> (eqv?-hash 1.5)
496387656
(equal?-hash obj)procedure

The equal?-hash procedure returns the hash number of the object obj. The hash number is a small exact integer (fixnum). For any two objects o1 and o2, (equal? o1 o2) implies (= (equal?-hash o1) (equal?-hash o2)).

For example:

 
> (equal?-hash (list 1 2 3))
442438567

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

11.2 Weak references

The garbage collector is responsible for reclaiming objects that are no longer needed by the program. This is done by analyzing the reachability graph of all objects from the roots (i.e. the global variables, the runnable threads, permanently allocated objects such as procedures defined in a compiled file, nonexecutable wills, etc). If a root or a reachable object X contains a reference to an object Y then Y is reachable. As a general rule, unreachable objects are reclaimed by the garbage collector.

There are two types of references: strong references and weak references. Most objects, including pairs, vectors, records and closures, contain strong references. An object X is strongly reachable if there is a path from the roots to X that traverses only strong references. Weak references only occur in wills and tables. There are two types of weak references: will-weak references and table-weak references. If all paths from the roots to an object Y traverse at least one table-weak reference, then Y will be reclaimed by the garbage collector. The will-weak references are used for finalization and are explained in the next section.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

11.2.1 Wills

The following procedures implement the will data type. Will objects provide support for finalization. A will is an object that contains a will-weak reference to a testator object (the object attached to the will), and a strong reference to an action procedure which is a one parameter procedure which is called when the will is executed.

(make-will testator action)procedure
(will? obj)procedure
(will-testator will)procedure
(will-execute! will)procedure

The make-will procedure creates a will object with the given testator object and action procedure. The will? procedure tests if obj is a will object. The will-testator procedure gets the testator object attached to the will. The will-execute! procedure executes will.

A will becomes executable when its testator object is not strongly reachable (i.e. the testator object is either unreachable or only reachable using paths from the roots that traverse at least one weak reference). Some objects, including symbols, small exact integers (fixnums), booleans and characters, are considered to be always strongly reachable.

When the runtime system detects that a will has become executable the current computation is interrupted, the will’s testator is set to #f and the will’s action procedure is called with the will’s testator as the sole argument. Currently only the garbage collector detects when wills become executable but this may change in future versions of Gambit (for example the compiler could perform an analysis to infer will executability at compile time). The garbage collector builds a list of all executable wills. Shortly after a garbage collection, the action procedures of these wills will be called. The link from the will to the action procedure is severed when the action procedure is called.

Note that the testator object will not be reclaimed during the garbage collection that determined executability of the will. It is only when an object is not reachable from the roots that it is reclaimed by the garbage collector.

A remarkable feature of wills is that an action procedure can “resurrect” an object. An action procedure could for example assign the testator object to a global variable or create a new will with the same testator object.

For example:

 
> (define a (list 123))
> (set-cdr! a a) ; create a circular list
> (define b (vector a))
> (define c #f)
> (define w
    (let ((obj a))
      (make-will obj
                 (lambda (x) ; x will be eq? to obj
                   (display "executing action procedure")
                   (newline)
                   (set! c x)))))
> (will? w)
#t
> (car (will-testator w))
123
> (##gc)
> (set! a #f)
> (##gc)
> (set! b #f)
> (##gc)
executing action procedure
> (will-testator w)
#f
> (car c)
123

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

11.2.2 Tables

The following procedures implement the table data type. Tables are heterogenous structures whose elements are indexed by keys which are arbitrary objects. Tables are similar to association lists but are abstract and the access time for large tables is typically smaller. Each key contained in the table is bound to a value. The length of the table is the number of key/value bindings it contains. New key/value bindings can be added to a table, the value bound to a key can be changed, and existing key/value bindings can be removed.

The references to the keys can either be all strong or all table-weak and the references to the values can either be all strong or all table-weak. The garbage collector removes key/value bindings from a table when 1) the key is a table-weak reference and the key is unreachable or only reachable using paths from the roots that traverse at least one table-weak reference, or 2) the value is a table-weak reference and the value is unreachable or only reachable using paths from the roots that traverse at least one table-weak reference. Key/value bindings that are removed by the garbage collector are reclaimed immediately.

Although there are several possible ways of implementing tables, the current implementation uses hashing with open-addressing. This is space efficient and provides constant-time access. Hash tables are automatically resized to maintain the load within specified bounds. The load is the number of active entries (the length of the table) divided by the total number of entries in the hash table.

Tables are parameterized with a key comparison procedure. By default the equal? procedure is used, but eq?, eqv?, string=?, string-ci=?, or a user defined procedure can also be used. To support arbitrary key comparison procedures, tables are also parameterized with a hashing procedure accepting a key as its single parameter and returning a fixnum result. The hashing procedure hash must be consistent with the key comparison procedure test, that is, for any two keys k1 and k2 in the table, (test k1 k2) implies (= (hash k1) (hash k2)). A default hashing procedure consistent with the key comparison procedure is provided by the system. The default hashing procedure generally gives good performance when the key comparison procedure is eq?, eqv?, equal?, string=?, and string-ci=?. However, for user defined key comparison procedures, the default hashing procedure always returns 0. This degrades the performance of the table to a linear search.

Tables can be compared for equality using the equal? procedure. Two tables X and Y are considered equal by equal? when they have the same weakness attributes, the same key comparison procedure, the same hashing procedure, the same length, and for all the keys k in X, (equal? (table-ref X k) (table-ref Y k)).

(make-table [size: size] [init: init] [weak-keys: weak-keys] [weak-values: weak-values] [test: test] [hash: hash] [min-load: min-load] [max-load: max-load])procedure

The procedure make-table returns a new table. The optional keyword parameters specify various parameters of the table.

The size parameter is a nonnegative exact integer indicating the expected length of the table. The system uses size to choose an appropriate initial size of the hash table so that it does not need to be resized too often.

The init parameter indicates a value that is associated to keys that are not in the table. When init is not specified, no value is associated to keys that are not in the table.

The weak-keys and weak-values parameters are extended booleans indicating respectively whether the keys and values are table-weak references (true) or strong references (false). By default the keys and values are strong references.

The test parameter indicates the key comparison procedure. The default key comparison procedure is equal?. The key comparison procedures eq?, eqv?, equal?, string=?, and string-ci=? are special because the system will use a reasonably good hash procedure when none is specified.

The hash parameter indicates the hash procedure. This procedure must accept a single key parameter, return a fixnum, and be consistent with the key comparison procedure. When hash is not specified, a default hash procedure is used. The default hash procedure is reasonably good when the key comparison procedure is eq?, eqv?, equal?, string=?, or string-ci=?.

The min-load and max-load parameters are real numbers that indicate the minimum and maximum load of the table respectively. The table is resized when adding or deleting a key/value binding would bring the table’s load outside of this range. The min-load parameter must be no less than 0.05 and the max-load parameter must be no greater than 0.95. Moreover the difference between min-load and max-load must be at least 0.20. When min-load is not specified, the value 0.45 is used. When max-load is not specified, the value 0.90 is used.

For example:

 
> (define t (make-table))
> (table? t)
#t
> (table-length t)
0
> (table-set! t (list 1 2) 3)
> (table-set! t (list 4 5) 6)
> (table-ref t (list 1 2))
3
> (table-length t)
2
(table? obj)procedure

The procedure table? returns #t when obj is a table and #f otherwise.

For example:

 
> (table? (make-table))
#t
> (table? 123)
#f
(table-length table)procedure

The procedure table-length returns the number of key/value bindings contained in the table table.

For example:

 
> (define t (make-table weak-keys: #t))
> (define x (list 1 2))
> (define y (list 3 4))
> (table-set! t x 111)
> (table-set! t y 222)
> (table-length t)
2
> (table-set! t x)
> (table-length t)
1
> (##gc)
> (table-length t)
1
> (set! y #f)
> (##gc)
> (table-length t)
0
(table-ref table key [default])procedure

The procedure table-ref returns the value bound to the object key in the table table. When key is not bound and default is specified, default is returned. When default is not specified but an init parameter was specified when table was created, init is returned. Otherwise an unbound-table-key-exception object is raised.

For example:

 
> (define t1 (make-table init: 999))
> (table-set! t1 (list 1 2) 3)
> (table-ref t1 (list 1 2))
3
> (table-ref t1 (list 4 5))
999
> (table-ref t1 (list 4 5) #f)
#f
> (define t2 (make-table))
> (table-ref t2 (list 4 5))
*** ERROR IN (console)@7.1 -- Unbound table key
(table-ref '#<table #2> '(4 5))
(table-set! table key [value])procedure

The procedure table-set! binds the object key to value in the table table. When value is not specified, if table contains a binding for key then the binding is removed from table. The procedure table-set! returns an unspecified value.

For example:

 
> (define t (make-table))
> (table-set! t (list 1 2) 3)
> (table-set! t (list 4 5) 6)
> (table-set! t (list 4 5))
> (table-set! t (list 7 8))
> (table-ref t (list 1 2))
3
> (table-ref t (list 4 5))
*** ERROR IN (console)@7.1 -- Unbound table key
(table-ref '#<table #2> '(4 5))
(table-search proc table)procedure

The procedure table-search searches the table table for a key/value binding for which the two parameter procedure proc returns a non false result. For each key/value binding visited by table-search the procedure proc is called with the key as the first parameter and the value as the second parameter. The procedure table-search returns the first non false value returned by proc, or #f if proc returned #f for all key/value bindings in table.

The order in which the key/value bindings are visited is unspecified and may vary from one call of table-search to the next. While a call to table-search is being performed on table, it is an error to call any of the following procedures on table: table-ref, table-set!, table-search, table-for-each, table-copy, table-merge, table-merge!, and table->list. It is also an error to compare with equal? (directly or indirectly with member, assoc, table-ref, etc.) an object that contains table. All these procedures may cause table to be reordered and resized. This restriction allows a more efficient iteration over the key/value bindings.

For example:

 
> (define square (make-table))
> (table-set! square 2 4)
> (table-set! square 3 9)
> (table-search (lambda (k v) (and (odd? k) v)) square)
9
(table-for-each proc table)procedure

The procedure table-for-each calls the two parameter procedure proc for each key/value binding in the table table. The procedure proc is called with the key as the first parameter and the value as the second parameter. The procedure table-for-each returns an unspecified value.

The order in which the key/value bindings are visited is unspecified and may vary from one call of table-for-each to the next. While a call to table-for-each is being performed on table, it is an error to call any of the following procedures on table: table-ref, table-set!, table-search, table-for-each, and table->list. It is also an error to compare with equal? (directly or indirectly with member, assoc, table-ref, etc.) an object that contains table. All these procedures may cause table to be reordered and resized. This restriction allows a more efficient iteration over the key/value bindings.

For example:

 
> (define square (make-table))
> (table-set! square 2 4)
> (table-set! square 3 9)
> (table-for-each (lambda (k v) (write (list k v)) (newline)) square)
(2 4)
(3 9)
(table->list table)procedure

The procedure table->list returns an association list containing the key/value bindings in the table table. Each key/value binding yields a pair whose car field is the key and whose cdr field is the value bound to that key. The order of the bindings in the list is unspecified.

For example:

 
> (define square (make-table))
> (table-set! square 2 4)
> (table-set! square 3 9)
> (table->list square)
((3 . 9) (2 . 4))
(list->table list [size: size] [init: init] [weak-keys: weak-keys] [weak-values: weak-values] [test: test] [hash: hash] [min-load: min-load] [max-load: max-load])procedure

The procedure list->table returns a new table containing the key/value bindings in the association list list. The optional keyword parameters specify various parameters of the table and have the same meaning as for the make-table procedure.

Each element of list is a pair whose car field is a key and whose cdr field is the value bound to that key. If a key appears more than once in list (tested using the table’s key comparison procedure) it is the first key/value binding in list that has precedence.

For example:

 
> (define t (list->table '((b . 2) (a . 1) (c . 3) (a . 4))))
> (table->list t)
((a . 1) (b . 2) (c . 3))
(unbound-table-key-exception? obj)procedure
(unbound-table-key-exception-procedure exc)procedure
(unbound-table-key-exception-arguments exc)procedure

Unbound-table-key-exception objects are raised by the procedure table-ref when the key does not have a binding in the table. The parameter exc must be an unbound-table-key-exception object.

The procedure unbound-table-key-exception? returns #t when obj is a unbound-table-key-exception object and #f otherwise.

The procedure unbound-table-key-exception-procedure returns the procedure that raised exc.

The procedure unbound-table-key-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define t (make-table))
> (define (handler exc)
    (if (unbound-table-key-exception? exc)
        (list (unbound-table-key-exception-procedure exc)
              (unbound-table-key-exception-arguments exc))
        'not-unbound-table-key-exception))
> (with-exception-catcher
    handler
    (lambda () (table-ref t '(1 2))))
(#<procedure #2 table-ref> (#<table #3> (1 2)))
(table-copy table)procedure

The procedure table-copy returns a new table containing the same key/value bindings as table and the same table parameters (i.e. hash procedure, key comparison procedure, key and value weakness, etc).

For example:

 
> (define t (list->table '((b . 2) (a . 1) (c . 3))))
> (define x (table-copy t))
> (table-set! t 'b 99)
> (table->list t)
((a . 1) (b . 99) (c . 3))
> (table->list x)
((a . 1) (b . 2) (c . 3))
(table-merge! table1 table2 [table2-takes-precedence?])procedure

The procedure table-merge! returns table1 after the key/value bindings contained in table2 have been added to it. When a key exists both in table1 and table2, then the parameter table2-takes-precedence? indicates which binding will be kept (the one in table1 if table2-takes-precedence? is false, and the one in table2 otherwise). If table2-takes-precedence? is not specified the binding in table1 is kept.

For example:

 
> (define t1 (list->table '((a . 1) (b . 2) (c . 3))))
> (define t2 (list->table '((a . 4) (b . 5) (z . 6))))
> (table->list (table-merge! t1 t2))
((a . 1) (b . 2) (c . 3) (z . 6))
> (define t1 (list->table '((a . 1) (b . 2) (c . 3))))
> (define t2 (list->table '((a . 4) (b . 5) (z . 6))))
> (table->list (table-merge! t1 t2 #t))
((a . 4) (b . 5) (c . 3) (z . 6))
(table-merge table1 table2 [table2-takes-precedence?])procedure

The procedure table-merge returns a copy of table1 (created with table-copy) to which the key/value bindings contained in table2 have been added using table-merge!. When a key exists both in table1 and table2, then the parameter table2-takes-precedence? indicates which binding will be kept (the one in table1 if table2-takes-precedence? is false, and the one in table2 otherwise). If table2-takes-precedence? is not specified the binding in table1 is kept.

For example:

 
> (define t1 (list->table '((a . 1) (b . 2) (c . 3))))
> (define t2 (list->table '((a . 4) (b . 5) (z . 6))))
> (table->list (table-merge t1 t2))
((a . 1) (b . 2) (c . 3) (z . 6))
> (table->list (table-merge t1 t2 #t))
((a . 4) (b . 5) (c . 3) (z . 6))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

12. Records

(define-structure name field)special form

Record data types similar to Pascal records and C struct types can be defined using the define-structure special form. The identifier name specifies the name of the new data type. The structure name is followed by k identifiers naming each field of the record. The define-structure expands into a set of definitions of the following procedures:

Record data types have a printed representation that includes the name of the type and the name and value of each field. Record data types can not be read by the read procedure.

For example:

 
> (define-structure point x y color)
> (define p (make-point 3 5 'red))
> p
#<point #2 x: 3 y: 5 color: red>
> (point-x p)
3
> (point-color p)
red
> (point-color-set! p 'black)
> p
#<point #2 x: 3 y: 5 color: black>

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13. Threads

Gambit supports the execution of multiple Scheme threads. These threads are managed entirely by Gambit’s runtime and are not related to the host operating system’s threads. Gambit’s runtime does not currently take advantage of multiprocessors (i.e. at most one thread is running).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.1 Introduction

Multithreading is a paradigm that is well suited for building complex systems such as: servers, GUIs, and high-level operating systems. Gambit’s thread system offers mechanisms for creating threads of execution and for synchronizing them. The thread system also supports features which are useful in a real-time context, such as priorities, priority inheritance and timeouts.

The thread system provides the following data types:


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.2 Thread objects

A running thread is a thread that is currently executing. A runnable thread is a thread that is ready to execute or running. A thread is blocked if it is waiting for a mutex to become unlocked, an I/O operation to become possible, the end of a “sleep” period, etc. A new thread is a thread that has been allocated but has not yet been initialized. An initialized thread is a thread that can be made runnable. A new thread becomes runnable when it is started by calling thread-start!. A terminated thread is a thread that can no longer become runnable (but deadlocked threads are not considered terminated). The only valid transitions between the thread states are from new to initialized, from initialized to runnable, between runnable and blocked, and from any state except new to terminated as indicated in the following diagram:

 
                                            unblock
                          start            <-------
NEW -------> INITIALIZED -------> RUNNABLE -------> BLOCKED
                       \             |      block  /
                        \            v            /
                         +-----> TERMINATED <----+

Each thread has a base priority, which is a real number (where a higher numerical value means a higher priority), a priority boost, which is a nonnegative real number representing the priority increase applied to a thread when it blocks, and a quantum, which is a nonnegative real number representing a duration in seconds.

Each thread has a specific field which can be used in an application specific way to associate data with the thread (some thread systems call this “thread local storage”).

Each thread has a mailbox which is used for inter-thread communication.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.3 Mutex objects

A mutex can be in one of four states: locked (either owned or not owned) and unlocked (either abandoned or not abandoned).

An attempt to lock a mutex only succeeds if the mutex is in an unlocked state, otherwise the current thread will wait. A mutex in the locked/owned state has an associated owner thread, which by convention is the thread that is responsible for unlocking the mutex (this case is typical of critical sections implemented as “lock mutex, perform operation, unlock mutex”). A mutex in the locked/not-owned state is not linked to a particular thread.

A mutex becomes locked when a thread locks it using the ‘mutex-lock!’ primitive. A mutex becomes unlocked/abandoned when the owner of a locked/owned mutex terminates. A mutex becomes unlocked/not-abandoned when a thread unlocks it using the ‘mutex-unlock!’ primitive.

The mutex primitives do not implement recursive mutex semantics. An attempt to lock a mutex that is locked implies that the current thread waits even if the mutex is owned by the current thread (this can lead to a deadlock if no other thread unlocks the mutex).

Each mutex has a specific field which can be used in an application specific way to associate data with the mutex.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.4 Condition variable objects

A condition variable represents a set of blocked threads. These blocked threads are waiting for a certain condition to become true. When a thread modifies some program state that might make the condition true, the thread unblocks some number of threads (one or all depending on the primitive used) so they can check if the condition is now true. This allows complex forms of interthread synchronization to be expressed more conveniently than with mutexes alone.

Each condition variable has a specific field which can be used in an application specific way to associate data with the condition variable.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.5 Fairness

In various situations the scheduler must select one thread from a set of threads (e.g. which thread to run when a running thread blocks or expires its quantum, which thread to unblock when a mutex becomes unlocked or a condition variable is signaled). The constraints on the selection process determine the scheduler’s fairness. The selection depends on the order in which threads become runnable or blocked and on the priority attached to the threads.

The definition of fairness requires the notion of time ordering, i.e. “event A occured before event B”. For the purpose of establishing time ordering, the scheduler uses a clock with a discrete, usually variable, resolution (a “tick”). Events occuring in a given tick can be considered to be simultaneous (i.e. if event A occured before event B in real time, then the scheduler will claim that event A occured before event B unless both events fall within the same tick, in which case the scheduler arbitrarily chooses a time ordering).

Each thread T has three priorities which affect fairness; the base priority, the boosted priority, and the effective priority.

Let P(T) be the effective priority of thread T and let R(T) be the most recent time when one of the following events occurred for thread T, thus making it runnable: T was started by calling ‘thread-start!’, T called ‘thread-yield!’, T expired its quantum, or T became unblocked. Let the relation NL(T1,T2), “T1 no later than T2”, be true if P(T1)<P(T2) or P(T1)=P(T2) and R(T1)>R(T2), and false otherwise. The scheduler will schedule the execution of threads in such a way that whenever there is at least one runnable thread, 1) within a finite time at least one thread will be running, and 2) there is never a pair of runnable threads T1 and T2 for which NL(T1,T2) is true and T1 is not running and T2 is running.

A thread T expires its quantum when an amount of time equal to T’s quantum has elapsed since T entered the running state and T did not block, terminate or call ‘thread-yield!’. At that point T exits the running state to allow other threads to run. A thread’s quantum is thus an indication of the rate of progress of the thread relative to the other threads of the same priority. Moreover, the resolution of the timer measuring the running time may cause a certain deviation from the quantum, so a thread’s quantum should only be viewed as an approximation of the time it can run before yielding to another thread.

Threads blocked on a given mutex or condition variable will unblock in an order which is consistent with decreasing priority and increasing blocking time (i.e. the highest priority thread unblocks first, and among equal priority threads the one that blocked first unblocks first).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.6 Memory coherency

Read and write operations on the store (such as reading and writing a variable, an element of a vector or a string) are not atomic. It is an error for a thread to write a location in the store while some other thread reads or writes that same location. It is the responsibility of the application to avoid write/read and write/write races through appropriate uses of the synchronization primitives.

Concurrent reads and writes to ports are allowed. It is the responsibility of the implementation to serialize accesses to a given port using the appropriate synchronization primitives.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.7 Timeouts

All synchronization primitives which take a timeout parameter accept three types of values as a timeout, with the following meaning:

When a timeout denotes the current time or a time in the past, the synchronization primitive claims that the timeout has been reached only after the other synchronization conditions have been checked. Moreover the thread remains running (it does not enter the blocked state). For example, (mutex-lock! m 0) will lock mutex m and return ‘#t’ if m is currently unlocked, otherwise ‘#f’ is returned because the timeout is reached.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.8 Primordial thread

The execution of a program is initially under the control of a single thread known as the primordial thread. The primordial thread has an unspecified base priority, priority boost, boosted flag, quantum, name, specific field, dynamic environment, ‘dynamic-wind’ stack, and exception-handler. All threads are terminated when the primordial thread terminates (normally or not).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

13.9 Procedures

(current-thread)procedure

This procedure returns the current thread. For example:

 
> (current-thread)
#<thread #1 primordial>
> (eq? (current-thread) (current-thread))
#t
(thread? obj)procedure

This procedure returns #t when obj is a thread object and #f otherwise.

For example:

 
> (thread? (current-thread))
#t
> (thread? 'foo)
#f
(make-thread thunk [name [thread-group]])procedure
(make-root-thread thunk [name [thread-group [input-port [output-port]]]])procedure

The make-thread procedure creates and returns an initialized thread. This thread is not automatically made runnable (the procedure thread-start! must be used for this). A thread has the following fields: base priority, priority boost, boosted flag, quantum, name, specific, end-result, end-exception, and a list of locked/owned mutexes it owns. The thread’s execution consists of a call to thunk with the initial continuation. This continuation causes the (then) current thread to store the result in its end-result field, abandon all mutexes it owns, and finally terminate. The ‘dynamic-wind’ stack of the initial continuation is empty. The optional name is an arbitrary Scheme object which identifies the thread (useful for debugging); it defaults to an unspecified value. The specific field is set to an unspecified value. The optional thread-group indicates which thread group this thread belongs to; it defaults to the thread group of the current thread. The base priority, priority boost, and quantum of the thread are set to the same value as the current thread and the boosted flag is set to false. The thread’s mailbox is initially empty. The thread inherits the dynamic environment from the current thread. Moreover, in this dynamic environment the exception-handler is bound to the initial exception-handler which is a unary procedure which causes the (then) current thread to store in its end-exception field an uncaught-exception object whose “reason” is the argument of the handler, abandon all mutexes it owns, and finally terminate.

The make-root-thread procedure behaves like the make-thread procedure except the created thread does not inherit the dynamic environment from the current thread and the base priority is set to 0, the priority boost is set to 1.0e-6, and the quantum is set to 0.02. The dynamic environment of the thread has the global bindings of the parameter objects, except current-input-port which is bound to input-port, current-output-port which is bound to output-port, and current-directory which is bound to the initial current working directory of the current process. If input-port is not specified it defaults to a port corresponding to the standard input (‘stdin’). If output-port is not specified it defaults to a port corresponding to the standard output (‘stdout’).

For example:

 
> (make-thread (lambda () (write 'hello)))
#<thread #2>
> (make-root-thread (lambda () (write 'world)) 'a-name)
#<thread #3 a-name>
(thread-name thread)procedure

This procedure returns the name of the thread. For example:

 
> (thread-name (make-thread (lambda () #f) 'foo))
foo
(thread-specific thread)procedure
(thread-specific-set! thread obj)procedure

The thread-specific procedure returns the content of the thread’s specific field.

The thread-specific-set! procedure stores obj into the thread’s specific field and returns an unspecified value.

For example:

 
> (thread-specific-set! (current-thread) "hello")
> (thread-specific (current-thread))
"hello"
(thread-base-priority thread)procedure
(thread-base-priority-set! thread priority)procedure

The procedure thread-base-priority returns a real number which corresponds to the base priority of the thread.

The procedure thread-base-priority-set! changes the base priority of the thread to priority and returns an unspecified value. The priority must be a real number.

For example:

 
> (thread-base-priority-set! (current-thread) 12.3)
> (thread-base-priority (current-thread))
12.3
(thread-priority-boost thread)procedure
(thread-priority-boost-set! thread priority-boost)procedure

The procedure thread-priority-boost returns a real number which corresponds to the priority boost of the thread.

The procedure thread-priority-boost-set! changes the priority boost of the thread to priority-boost and returns an unspecified value. The priority-boost must be a nonnegative real.

For example:

 
> (thread-priority-boost-set! (current-thread) 2.5)
> (thread-priority-boost (current-thread))
2.5
(thread-quantum thread)procedure
(thread-quantum-set! thread quantum)procedure

The procedure thread-quantum returns a real number which corresponds to the quantum of the thread.

The procedure thread-quantum-set! changes the quantum of the thread to quantum and returns an unspecified value. The quantum must be a nonnegative real. A value of zero selects the smallest quantum supported by the implementation.

For example:

 
> (thread-quantum-set! (current-thread) 1.5)
> (thread-quantum (current-thread))
1.5
> (thread-quantum-set! (current-thread) 0)
> (thread-quantum (current-thread))
0.
(thread-start! thread)procedure

This procedure makes thread runnable and returns the thread. The thread must be an initialized thread.

For example:

 
> (let ((t (thread-start! (make-thread (lambda () (write 'a))))))
    (write 'b)
    (thread-join! t))
ab> or ba>

NOTE: It is useful to separate thread creation and thread activation to avoid the race condition that would occur if the created thread tries to examine a table in which the current thread stores the created thread. See the last example of the thread-terminate! procedure which contains mutually recursive threads.

(thread-yield!)procedure

This procedure causes the current thread to exit the running state as if its quantum had expired and returns an unspecified value.

For example:

 
; a busy loop that avoids being too wasteful of the CPU

(let loop ()
  (if (mutex-lock! m 0) ; try to lock m but don't block
      (begin
        (display "locked mutex m")
        (mutex-unlock! m))
      (begin
        (do-something-else)
        (thread-yield!) ; relinquish rest of quantum
        (loop))))
(thread-sleep! timeout)procedure

This procedure causes the current thread to wait until the timeout is reached and returns an unspecified value. This blocks the thread only if timeout represents a point in the future. It is an error for timeout to be ‘#f’.

For example:

 
; a clock with a gradual drift:

(let loop ((x 1))
  (thread-sleep! 1)
  (write x)
  (loop (+ x 1)))

; a clock with no drift:

(let ((start (time->seconds (current-time)))
  (let loop ((x 1))
    (thread-sleep! (seconds->time (+ x start)))
    (write x)
    (loop (+ x 1))))
(thread-terminate! thread)procedure

This procedure causes an abnormal termination of the thread. If the thread is not already terminated, all mutexes owned by the thread become unlocked/abandoned and a terminated-thread-exception object is stored in the thread’s end-exception field. If thread is the current thread, thread-terminate! does not return. Otherwise thread-terminate! returns an unspecified value; the termination of the thread will occur at some point between the calling of thread-terminate! and a finite time in the future (an explicit thread synchronization is needed to detect termination, see thread-join!).

For example:

 
(define (amb thunk1 thunk2)
  (let ((result #f)
        (result-mutex (make-mutex))
        (done-mutex (make-mutex)))
    (letrec ((child1
              (make-thread
                (lambda ()
                  (let ((x (thunk1)))
                    (mutex-lock! result-mutex #f #f)
                    (set! result x)
                    (thread-terminate! child2)
                    (mutex-unlock! done-mutex)))))
             (child2
              (make-thread
                (lambda ()
                  (let ((x (thunk2)))
                    (mutex-lock! result-mutex #f #f)
                    (set! result x)
                    (thread-terminate! child1)
                    (mutex-unlock! done-mutex))))))
      (mutex-lock! done-mutex #f #f)
      (thread-start! child1)
      (thread-start! child2)
      (mutex-lock! done-mutex #f #f)
      result)))

NOTE: This operation must be used carefully because it terminates a thread abruptly and it is impossible for that thread to perform any kind of cleanup. This may be a problem if the thread is in the middle of a critical section where some structure has been put in an inconsistent state. However, another thread attempting to enter this critical section will raise an abandoned-mutex-exception object because the mutex is unlocked/abandoned. This helps avoid observing an inconsistent state. Clean termination can be obtained by polling, as shown in the example below.

For example:

 
(define (spawn thunk)
  (let ((t (make-thread thunk)))
    (thread-specific-set! t #t)
    (thread-start! t)
    t))

(define (stop! thread)
  (thread-specific-set! thread #f)
  (thread-join! thread))

(define (keep-going?)
  (thread-specific (current-thread)))

(define count!
  (let ((m (make-mutex))
        (i 0))
    (lambda ()
      (mutex-lock! m)
      (let ((x (+ i 1)))
        (set! i x)
        (mutex-unlock! m)
        x))))

(define (increment-forever!)
  (let loop () (count!) (if (keep-going?) (loop))))

(let ((t1 (spawn increment-forever!))
      (t2 (spawn increment-forever!)))
  (thread-sleep! 1)
  (stop! t1)
  (stop! t2)
  (count!))  ==>  377290
(thread-join! thread [timeout [timeout-val]])procedure

This procedure causes the current thread to wait until the thread terminates (normally or not) or until the timeout is reached if timeout is supplied. If the timeout is reached, thread-join! returns timeout-val if it is supplied, otherwise a join-timeout-exception object is raised. If the thread terminated normally, the content of the end-result field is returned, otherwise the content of the end-exception field is raised.

For example:

 
(let ((t (thread-start! (make-thread (lambda () (expt 2 100))))))
  (do-something-else)
  (thread-join! t))  ==>  1267650600228229401496703205376

(let ((t (thread-start! (make-thread (lambda () (raise 123))))))
  (do-something-else)
  (with-exception-handler
    (lambda (exc)
      (if (uncaught-exception? exc)
          (* 10 (uncaught-exception-reason exc))
          99999))
    (lambda ()
      (+ 1 (thread-join! t)))))  ==>  1231

(define thread-alive?
  (let ((unique (list 'unique)))
    (lambda (thread)
      ; Note: this procedure raises an exception if
      ; the thread terminated abnormally.
      (eq? (thread-join! thread 0 unique) unique))))

(define (wait-for-termination! thread)
  (let ((eh (current-exception-handler)))
    (with-exception-handler
      (lambda (exc)
        (if (not (or (terminated-thread-exception? exc)
                     (uncaught-exception? exc)))
            (eh exc))) ; unexpected exceptions are handled by eh
      (lambda ()
        ; The following call to thread-join! will wait until the
        ; thread terminates.  If the thread terminated normally
        ; thread-join! will return normally.  If the thread
        ; terminated abnormally then one of these two exception
        ; objects is raised by thread-join!:
        ;   - terminated-thread-exception object
        ;   - uncaught-exception object
        (thread-join! thread)
        #f)))) ; ignore result of thread-join!
(thread-send thread msg)procedure

Each thread has a mailbox which stores messages delivered to the thread in the order delivered.

The procedure thread-send adds the message msg at the end of the mailbox of thread thread and returns an unspecified value.

For example:

 
> (thread-send (current-thread) 111)
> (thread-send (current-thread) 222)
> (thread-receive)
111
> (thread-receive)
222
(thread-receive [timeout [default]])procedure
(thread-mailbox-next [timeout [default]])procedure
(thread-mailbox-rewind)procedure
(thread-mailbox-extract-and-rewind)procedure

To allow a thread to examine the messages in its mailbox without removing them from the mailbox, each thread has a mailbox cursor which normally points to the last message accessed in the mailbox. When a mailbox cursor is rewound using the procedure thread-mailbox-rewind or thread-mailbox-extract-and-rewind or thread-receive, the cursor does not point to a message, but the next call to thread-receive and thread-mailbox-next will set the cursor to the oldest message in the mailbox.

The procedure thread-receive advances the mailbox cursor of the current thread to the next message, removes that message from the mailbox, rewinds the mailbox cursor, and returns the message. When timeout is not specified, the current thread will wait until a message is available in the mailbox. When timeout is specified and default is not specified, a mailbox-receive-timeout-exception object is raised if the timeout is reached before a message is available. When timeout is specified and default is specified, default is returned if the timeout is reached before a message is available.

The procedure thread-mailbox-next behaves like thread-receive except that the message remains in the mailbox and the mailbox cursor is not rewound.

The procedures thread-mailbox-rewind or thread-mailbox-extract-and-rewind rewind the mailbox cursor of the current thread so that the next call to thread-mailbox-next and thread-receive will access the oldest message in the mailbox. Additionally the procedure thread-mailbox-extract-and-rewind will remove from the mailbox the message most recently accessed by a call to thread-mailbox-next. When thread-mailbox-next has not been called since the last call to thread-receive or thread-mailbox-rewind or thread-mailbox-extract-and-rewind, a call to thread-mailbox-extract-and-rewind only resets the mailbox cursor (no message is removed).

For example:

 
> (thread-send (current-thread) 111)
> (thread-receive 1 999)
111
> (thread-send (current-thread) 222)
> (thread-send (current-thread) 333)
> (thread-mailbox-next 1 999)
222
> (thread-mailbox-next 1 999)
333
> (thread-mailbox-next 1 999)
999
> (thread-mailbox-extract-and-rewind)
> (thread-receive 1 999)
222
> (thread-receive 1 999)
999
(mailbox-receive-timeout-exception? obj)procedure
(mailbox-receive-timeout-exception-procedure exc)procedure
(mailbox-receive-timeout-exception-arguments exc)procedure

Mailbox-receive-timeout-exception objects are raised by the procedures thread-receive and thread-mailbox-next when a timeout expires before a message is available and no default value is specified. The parameter exc must be a mailbox-receive-timeout-exception object.

The procedure mailbox-receive-timeout-exception? returns #t when obj is a mailbox-receive-timeout-exception object and #f otherwise.

The procedure mailbox-receive-timeout-exception-procedure returns the procedure that raised exc.

The procedure mailbox-receive-timeout-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (mailbox-receive-timeout-exception? exc)
        (list (mailbox-receive-timeout-exception-procedure exc)
              (mailbox-receive-timeout-exception-arguments exc))
        'not-mailbox-receive-timeout-exception))
> (with-exception-catcher
    handler
    (lambda () (thread-receive 1)))
(#<procedure #2 thread-receive> (1))
(mutex? obj)procedure

This procedure returns #t when obj is a mutex object and #f otherwise.

For example:

 
> (mutex? (make-mutex))
#t
> (mutex? 'foo)
#f
(make-mutex [name])procedure

This procedure returns a new mutex in the unlocked/not-abandoned state. The optional name is an arbitrary Scheme object which identifies the mutex (useful for debugging); it defaults to an unspecified value. The mutex’s specific field is set to an unspecified value.

For example:

 
> (make-mutex)
#<mutex #2>
> (make-mutex 'foo)
#<mutex #3 foo>
(mutex-name mutex)procedure

Returns the name of the mutex. For example:

 
> (mutex-name (make-mutex 'foo))
foo
(mutex-specific mutex)procedure
(mutex-specific-set! mutex obj)procedure

The mutex-specific procedure returns the content of the mutex’s specific field.

The mutex-specific-set! procedure stores obj into the mutex’s specific field and returns an unspecified value.

For example:

 
> (define m (make-mutex))
> (mutex-specific-set! m "hello")
> (mutex-specific m)
"hello"
> (define (mutex-lock-recursively! mutex)
    (if (eq? (mutex-state mutex) (current-thread))
        (let ((n (mutex-specific mutex)))
          (mutex-specific-set! mutex (+ n 1)))
        (begin
          (mutex-lock! mutex)
          (mutex-specific-set! mutex 0))))
> (define (mutex-unlock-recursively! mutex)
    (let ((n (mutex-specific mutex)))
      (if (= n 0)
          (mutex-unlock! mutex)
          (mutex-specific-set! mutex (- n 1)))))
> (mutex-lock-recursively! m)
> (mutex-lock-recursively! m)
> (mutex-lock-recursively! m)
> (mutex-specific m)
2
(mutex-state mutex)procedure

Thos procedure returns information about the state of the mutex. The possible results are:

For example:

 
(mutex-state (make-mutex))  ==>  not-abandoned

(define (thread-alive? thread)
  (let ((mutex (make-mutex)))
    (mutex-lock! mutex #f thread)
    (let ((state (mutex-state mutex)))
      (mutex-unlock! mutex) ; avoid space leak
      (eq? state thread))))
(mutex-lock! mutex [timeout [thread]])procedure

This procedure locks mutex. If the mutex is currently locked, the current thread waits until the mutex is unlocked, or until the timeout is reached if timeout is supplied. If the timeout is reached, mutex-lock! returns ‘#f’. Otherwise, the state of the mutex is changed as follows:

After changing the state of the mutex, an abandoned-mutex-exception object is raised if the mutex was unlocked/abandoned before the state change, otherwise mutex-lock! returns ‘#t’. It is not an error if the mutex is owned by the current thread (but the current thread will have to wait).

For example:

 
; an implementation of a mailbox object of depth one; this
; implementation does not behave well in the presence of forced
; thread terminations using thread-terminate! (deadlock can occur
; if a thread is terminated in the middle of a put! or get! operation)

(define (make-empty-mailbox)
  (let ((put-mutex (make-mutex)) ; allow put! operation
        (get-mutex (make-mutex))
        (cell #f))

    (define (put! obj)
      (mutex-lock! put-mutex #f #f) ; prevent put! operation
      (set! cell obj)
      (mutex-unlock! get-mutex)) ; allow get! operation

    (define (get!)
      (mutex-lock! get-mutex #f #f) ; wait until object in mailbox
      (let ((result cell))
        (set! cell #f) ; prevent space leaks
        (mutex-unlock! put-mutex) ; allow put! operation
        result))

    (mutex-lock! get-mutex #f #f) ; prevent get! operation

    (lambda (msg)
      (case msg
        ((put!) put!)
        ((get!) get!)
        (else (error "unknown message"))))))

(define (mailbox-put! m obj) ((m 'put!) obj))
(define (mailbox-get! m) ((m 'get!)))

; an alternate implementation of thread-sleep!

(define (sleep! timeout)
  (let ((m (make-mutex)))
    (mutex-lock! m #f #f)
    (mutex-lock! m timeout #f)))

; a procedure that waits for one of two mutexes to unlock

(define (lock-one-of! mutex1 mutex2)
  ; this procedure assumes that neither mutex1 or mutex2
  ; are owned by the current thread
  (let ((ct (current-thread))
        (done-mutex (make-mutex)))
    (mutex-lock! done-mutex #f #f)
    (let ((t1 (thread-start!
               (make-thread
                (lambda ()
                  (mutex-lock! mutex1 #f ct)
                  (mutex-unlock! done-mutex)))))
          (t2 (thread-start!
               (make-thread
                (lambda ()
                  (mutex-lock! mutex2 #f ct)
                  (mutex-unlock! done-mutex))))))
      (mutex-lock! done-mutex #f #f)
      (thread-terminate! t1)
      (thread-terminate! t2)
      (if (eq? (mutex-state mutex1) ct)
          (begin
            (if (eq? (mutex-state mutex2) ct)
                (mutex-unlock! mutex2)) ; don't lock both
            mutex1)
          mutex2))))
(mutex-unlock! mutex [condition-variable [timeout]])procedure

This procedure unlocks the mutex by making it unlocked/not-abandoned. It is not an error to unlock an unlocked mutex and a mutex that is owned by any thread. If condition-variable is supplied, the current thread is blocked and added to the condition-variable before unlocking mutex; the thread can unblock at any time but no later than when an appropriate call to condition-variable-signal! or condition-variable-broadcast! is performed (see below), and no later than the timeout (if timeout is supplied). If there are threads waiting to lock this mutex, the scheduler selects a thread, the mutex becomes locked/owned or locked/not-owned, and the thread is unblocked. mutex-unlock! returns ‘#f’ when the timeout is reached, otherwise it returns ‘#t’.

NOTE: The reason the thread can unblock at any time (when condition-variable is supplied) is that the scheduler, when it detects a serious problem such as a deadlock, must interrupt one of the blocked threads (such as the primordial thread) so that it can perform some appropriate action. After a thread blocked on a condition-variable has handled such an interrupt it would be wrong for the scheduler to return the thread to the blocked state, because any calls to condition-variable-broadcast! during the interrupt will have gone unnoticed. It is necessary for the thread to remain runnable and return from the call to mutex-unlock! with a result of ‘#t’.

NOTE: mutex-unlock! is related to the “wait” operation on condition variables available in other thread systems. The main difference is that “wait” automatically locks mutex just after the thread is unblocked. This operation is not performed by mutex-unlock! and so must be done by an explicit call to mutex-lock!. This has the advantages that a different timeout and exception-handler can be specified on the mutex-lock! and mutex-unlock! and the location of all the mutex operations is clearly apparent.

For example:

 
(let loop ()
  (mutex-lock! m)
  (if (condition-is-true?)
      (begin
        (do-something-when-condition-is-true)
        (mutex-unlock! m))
      (begin
        (mutex-unlock! m cv)
        (loop))))
(condition-variable? obj)procedure

This procedure returns #t when obj is a condition-variable object and #f otherwise.

For example:

 
> (condition-variable? (make-condition-variable))
#t
> (condition-variable? 'foo)
#f
(make-condition-variable [name])procedure

This procedure returns a new empty condition variable. The optional name is an arbitrary Scheme object which identifies the condition variable (useful for debugging); it defaults to an unspecified value. The condition variable’s specific field is set to an unspecified value.

For example:

 
> (make-condition-variable)
#<condition-variable #2>
(condition-variable-name condition-variable)procedure

This procedure returns the name of the condition-variable. For example:

 
> (condition-variable-name (make-condition-variable 'foo))
foo
(condition-variable-specific condition-variable)procedure
(condition-variable-specific-set! condition-variable obj)procedure

The condition-variable-specific procedure returns the content of the condition-variable’s specific field.

The condition-variable-specific-set! procedure stores obj into the condition-variable’s specific field and returns an unspecified value.

For example:

 
> (define cv (make-condition-variable))
> (condition-variable-specific-set! cv "hello")
> (condition-variable-specific cv)
"hello"
(condition-variable-signal! condition-variable)procedure

This procedure unblocks a thread blocked on the condition-variable (if there is at least one) and returns an unspecified value.

For example:

 
; an implementation of a mailbox object of depth one; this
; implementation behaves gracefully when threads are forcibly
; terminated using thread-terminate! (an abandoned-mutex-exception
; object will be raised when a put! or get! operation is attempted
; after a thread is terminated in the middle of a put! or get!
; operation)

(define (make-empty-mailbox)
  (let ((mutex (make-mutex))
        (put-condvar (make-condition-variable))
        (get-condvar (make-condition-variable))
        (full? #f)
        (cell #f))

    (define (put! obj)
      (mutex-lock! mutex)
      (if full?
          (begin
            (mutex-unlock! mutex put-condvar)
            (put! obj))
          (begin
            (set! cell obj)
            (set! full? #t)
            (condition-variable-signal! get-condvar)
            (mutex-unlock! mutex))))

    (define (get!)
      (mutex-lock! mutex)
      (if (not full?)
          (begin
            (mutex-unlock! mutex get-condvar)
            (get!))
          (let ((result cell))
            (set! cell #f) ; avoid space leaks
            (set! full? #f)
            (condition-variable-signal! put-condvar)
            (mutex-unlock! mutex)
            result)))

    (lambda (msg)
      (case msg
        ((put!) put!)
        ((get!) get!)
        (else (error "unknown message"))))))

(define (mailbox-put! m obj) ((m 'put!) obj))
(define (mailbox-get! m) ((m 'get!)))
(condition-variable-broadcast! condition-variable)procedure

This procedure unblocks all the thread blocked on the condition-variable and returns an unspecified value.

For example:

 
(define (make-semaphore n)
  (vector n (make-mutex) (make-condition-variable)))

(define (semaphore-wait! sema)
  (mutex-lock! (vector-ref sema 1))
  (let ((n (vector-ref sema 0)))
    (if (> n 0)
        (begin
          (vector-set! sema 0 (- n 1))
          (mutex-unlock! (vector-ref sema 1)))
        (begin
          (mutex-unlock! (vector-ref sema 1) (vector-ref sema 2))
          (semaphore-wait! sema))))

(define (semaphore-signal-by! sema increment)
  (mutex-lock! (vector-ref sema 1))
  (let ((n (+ (vector-ref sema 0) increment)))
    (vector-set! sema 0 n)
    (if (> n 0)
        (condition-variable-broadcast! (vector-ref sema 2)))
    (mutex-unlock! (vector-ref sema 1))))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

14. Dynamic environment

The dynamic environment is the structure which allows the system to find the value returned by the standard procedures current-input-port and current-output-port. The standard procedures with-input-from-file and with-output-to-file extend the dynamic environment to produce a new dynamic environment which is in effect for the dynamic extent of the call to the thunk passed as their last argument. These procedures are essentially special purpose dynamic binding operations on hidden dynamic variables (one for current-input-port and one for current-output-port). Gambit generalizes this dynamic binding mechanism to allow the user to introduce new dynamic variables, called parameter objects, and dynamically bind them. The parameter objects implemented by Gambit are compatible with the specification of the “Parameter objects SRFI” (SRFI 39).

One important issue is the relationship between the dynamic environments of the parent and child threads when a thread is created. Each thread has its own dynamic environment that is accessed when looking up the value bound to a parameter object by that thread. When a thread’s dynamic environment is extended it does not affect the dynamic environment of other threads. When a thread is created it is given a dynamic environment whose bindings are inherited from the parent thread. In this inherited dynamic environment the parameter objects are bound to the same cells as the parent’s dynamic environment (in other words an assignment of a new value to a parameter object is visible in the other thread).

Another important issue is the interaction between the dynamic-wind procedure and dynamic environments. When a thread creates a continuation, the thread’s dynamic environment and the ‘dynamic-wind’ stack are saved within the continuation (an alternate but equivalent point of view is that the ‘dynamic-wind’ stack is part of the dynamic environment). When this continuation is invoked the required ‘dynamic-wind’ before and after thunks are called and the saved dynamic environment is reinstated as the dynamic environment of the current thread. During the call to each required ‘dynamic-wind’ before and after thunk, the dynamic environment and the ‘dynamic-wind’ stack in effect when the corresponding ‘dynamic-wind’ was executed are reinstated. Note that this specification precisely defines the semantics of calling ‘call-with-current-continuation’ or invoking a continuation within a before or after thunk. The semantics are well defined even when a continuation created by another thread is invoked. Below is an example exercising the subtleties of this semantics.

 
(with-output-to-file
 "foo"
 (lambda ()
   (let ((k (call-with-current-continuation
             (lambda (exit)
               (with-output-to-file
                "bar"
                (lambda ()
                  (dynamic-wind
                   (lambda ()
                     (write '(b1))
                     (force-output))
                   (lambda ()
                     (let ((x (call-with-current-continuation
                               (lambda (cont) (exit cont)))))
                       (write '(t1))
                       (force-output)
                       x))
                   (lambda ()
                     (write '(a1))
                     (force-output)))))))))
     (if k
         (dynamic-wind
          (lambda ()
            (write '(b2))
            (force-output))
          (lambda ()
            (with-output-to-file
             "baz"
             (lambda ()
               (write '(t2))
               (force-output)
               ; go back inside (with-output-to-file "bar" ...)
               (k #f))))
          (lambda ()
            (write '(a2))
            (force-output)))))))

The following actions will occur when this code is executed: (b1)(a1) is written to “bar”, (b2) is then written to “foo”, (t2) is then written to “baz”, (a2) is then written to “foo”, and finally (b1)(t1)(a1) is written to “bar”.

(make-parameter obj [filter])procedure

The dynamic environment is composed of two parts: the local dynamic environment and the global dynamic environment. There is a single global dynamic environment, and it is used to lookup parameter objects that can’t be found in the local dynamic environment.

The make-parameter procedure returns a new parameter object. The filter argument is a one argument conversion procedure. If it is not specified, filter defaults to the identity function.

The global dynamic environment is updated to associate the parameter object to a new cell. The initial content of the cell is the result of applying the conversion procedure to obj.

A parameter object is a procedure which accepts zero or one argument. The cell bound to a particular parameter object in the dynamic environment is accessed by calling the parameter object. When no argument is passed, the content of the cell is returned. When one argument is passed the content of the cell is updated with the result of applying the parameter object’s conversion procedure to the argument. Note that the conversion procedure can be used for guaranteeing the type of the parameter object’s binding and/or to perform some conversion of the value.

For example:

 
> (define radix (make-parameter 10))
> (radix)
10
> (radix 2)
> (radix)
2
> (define prompt
    (make-parameter
      123
      (lambda (x)
        (if (string? x)
            x
            (object->string x)))))
> (prompt)
"123"
> (prompt "$")
> (prompt)
"$"
> (define write-shared
    (make-parameter
      #f
      (lambda (x)
        (if (boolean? x)
            x
            (error "only booleans are accepted by write-shared")))))
> (write-shared 123)
*** ERROR IN ##make-parameter -- only booleans are accepted by write-shared
(parameterize ((procedure value)…) body)special form

The parameterize form, evaluates all procedure and value expressions in an unspecified order. All the procedure expressions must evaluate to procedures, either parameter objects or procedures accepting zero and one argument. Then, for each procedure p and in an unspecified order:

The result(s) of the parameterize form are the result(s) of the body.

Note that using procedures instead of parameter objects may lead to unexpected results in multithreaded programs because the before and after thunks of the dynamic-wind are not called when control switches between threads.

For example:

 
> (define radix (make-parameter 2))
> (define prompt
    (make-parameter
      123
      (lambda (x)
        (if (string? x)
            x
            (object->string x)))))
> (radix)
2
> (parameterize ((radix 16)) (radix))
16
> (radix)
2
> (define (f n) (number->string n (radix)))
> (f 10)
"1010"
> (parameterize ((radix 8)) (f 10))
"12"
> (parameterize ((radix 8) (prompt (f 10))) (prompt))
"1010"
> (define p
    (let ((x 1))
      (lambda args
        (if (null? args) x (set! x (car args))))))
> (let* ((a (p))
         (b (parameterize ((p 2)) (list (p))))
         (c (p)))
    (list a b c))
(1 (2) 1)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15. Exceptions


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.1 Exception-handling

Gambit’s exception-handling model is inspired from the withdrawn “Exception Handling SRFI” (SRFI 12), the “Multithreading support SRFI” (SRFI 18), and the “Exception Handling for Programs SRFI” (SRFI 34). The two fundamental operations are the dynamic binding of an exception handler (i.e. the procedure with-exception-handler) and the invocation of the exception handler (i.e. the procedure raise).

All predefined procedures which check for errors (including type errors, memory allocation errors, host operating-system errors, etc) report these errors using the exception-handling system (i.e. they “raise” an exception that can be handled in a user-defined exception handler). When an exception is raised and the exception is not handled by a user-defined exception handler, the predefined exception handler will display an error message (if the primordial thread raised the exception) or the thread will silently terminate with no error message (if it is not the primordial thread that raised the exception). This default behavior can be changed through the ‘-:d’ runtime option (see section Runtime options).

Predefined procedures normally raise exceptions by performing a tail-call to the exception handler (the exceptions are “complex” procedures such as eval, compile-file, read, write, etc). This means that the continuation of the exception handler and of the REPL that may be started due to this is normally the continuation of the predefined procedure that raised the exception. By exiting the REPL with the ,(c expression) command it is thus possible to resume the program as though the call to the predefined procedure returned the value of expression. For example:

 
> (define (f x) (+ (car x) 1))
> (f 2) ; typo... we meant to say (f '(2))
*** ERROR IN f, (console)@1.18 -- (Argument 1) PAIR expected
(car 2)
1> ,(c 2)
3
(current-exception-handler [new-exception-handler])procedure

The parameter object current-exception-handler is bound to the current exception-handler. Calling this procedure with no argument returns the current exception-handler and calling this procedure with one argument sets the current exception-handler to new-exception-handler.

For example:

 
> (current-exception-handler)
#<procedure #2 primordial-exception-handler>
> (current-exception-handler (lambda (exc) (pp exc) 999))
> (/ 1 0)
#<divide-by-zero-exception #3>
999
(with-exception-handler handler thunk)procedure

Returns the result(s) of calling thunk with no arguments. The handler, which must be a procedure, is installed as the current exception-handler in the dynamic environment in effect during the call to thunk. Note that the dynamic environment in effect during the call to handler has handler as the exception-handler. Consequently, an exception raised during the call to handler may lead to an infinite loop.

For example:

 
> (with-exception-handler
    (lambda (e) (write e) 5)
    (lambda () (+ 1 (* 2 3) 4)))
11
> (with-exception-handler
    (lambda (e) (write e) 5)
    (lambda () (+ 1 (* 'foo 3) 4)))
#<type-exception #2>10
> (with-exception-handler
    (lambda (e) (write e 9))
    (lambda () (+ 1 (* 'foo 3) 4)))
infinite loop
(with-exception-catcher handler thunk)procedure

Returns the result(s) of calling thunk with no arguments. A new exception-handler is installed as the current exception-handler in the dynamic environment in effect during the call to thunk. This new exception-handler will call the handler, which must be a procedure, with the exception object as an argument and with the same continuation as the call to with-exception-catcher. This implies that the dynamic environment in effect during the call to handler is the same as the one in effect at the call to with-exception-catcher. Consequently, an exception raised during the call to handler will not lead to an infinite loop.

For example:

 
> (with-exception-catcher
    (lambda (e) (write e) 5)
    (lambda () (+ 1 (* 2 3) 4)))
11
> (with-exception-catcher
    (lambda (e) (write e) 5)
    (lambda () (+ 1 (* 'foo 3) 4)))
#<type-exception #2>5
> (with-exception-catcher
    (lambda (e) (write e 9))
    (lambda () (+ 1 (* 'foo 3) 4)))
*** ERROR IN (console)@7.1 -- (Argument 2) OUTPUT PORT expected
(write '#<type-exception #3> 9)
(raise obj)procedure

This procedure tail-calls the current exception-handler with obj as the sole argument. If the exception-handler returns, the continuation of the call to raise is invoked.

For example:

 
> (with-exception-handler
    (lambda (exc)
      (pp exc)
      100)
    (lambda ()
      (+ 1 (raise "hello"))))
"hello"
101
(abort obj)procedure
(noncontinuable-exception? obj)procedure
(noncontinuable-exception-reason exc)procedure

The procedure abort calls the current exception-handler with obj as the sole argument. If the exception-handler returns, the procedure abort will be tail-called with a noncontinuable-exception object, whose reason field is obj, as sole argument.

Noncontinuable-exception objects are raised by the abort procedure when the exception-handler returns. The parameter exc must be a noncontinuable-exception object.

The procedure noncontinuable-exception? returns #t when obj is a noncontinuable-exception object and #f otherwise.

The procedure noncontinuable-exception-reason returns the argument of the call to abort that raised exc.

For example:

 
> (call-with-current-continuation
    (lambda (k)
      (with-exception-handler
        (lambda (exc)
          (pp exc)
          (if (noncontinuable-exception? exc)
              (k (list (noncontinuable-exception-reason exc)))
              100))
        (lambda ()
          (+ 1 (abort "hello"))))))
"hello"
#<noncontinuable-exception #2>
("hello")

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.2 Exception objects related to memory management

(heap-overflow-exception? obj)procedure

Heap-overflow-exception objects are raised when the allocation of an object would cause the heap to use more memory space than is available.

The procedure heap-overflow-exception? returns #t when obj is a heap-overflow-exception object and #f otherwise.

For example:

 
> (define (handler exc)
    (if (heap-overflow-exception? exc)
        exc
        'not-heap-overflow-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (define (f x) (f (cons 1 x)))
      (f '())))
#<heap-overflow-exception #2>
(stack-overflow-exception? obj)procedure

Stack-overflow-exception objects are raised when the allocation of a continuation frame would cause the heap to use more memory space than is available.

The procedure stack-overflow-exception? returns #t when obj is a stack-overflow-exception object and #f otherwise.

For example:

 
> (define (handler exc)
    (if (stack-overflow-exception? exc)
        exc
        'not-stack-overflow-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (define (f) (+ 1 (f)))
      (f)))
#<stack-overflow-exception #2>

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.3 Exception objects related to the host environment

(os-exception? obj)procedure
(os-exception-procedure exc)procedure
(os-exception-arguments exc)procedure
(os-exception-code exc)procedure
(os-exception-message exc)procedure

Os-exception objects are raised by procedures which access the host operating-system’s services when the requested operation fails. The parameter exc must be a os-exception object.

The procedure os-exception? returns #t when obj is a os-exception object and #f otherwise.

The procedure os-exception-procedure returns the procedure that raised exc.

The procedure os-exception-arguments returns the list of arguments of the procedure that raised exc.

The procedure os-exception-code returns an exact integer error code that can be converted to a string by the err-code->string procedure. Note that the error code is operating-system dependent.

The procedure os-exception-message returns #f or a string giving details of the exception in a human-readable form.

For example:

 
> (define (handler exc)
    (if (os-exception? exc)
        (list (os-exception-procedure exc)
              (os-exception-arguments exc)
              (err-code->string (os-exception-code exc))
              (os-exception-message exc))
        'not-os-exception))
> (with-exception-catcher
    handler
    (lambda () (host-info "x.y.z")))
(#<procedure #2 host-info> ("x.y.z") "Unknown host" #f)
(no-such-file-or-directory-exception? obj)procedure
(no-such-file-or-directory-exception-procedure exc)procedure
(no-such-file-or-directory-exception-arguments exc)procedure

No-such-file-or-directory-exception objects are raised by procedures which access the filesystem (such as open-input-file and directory-files) when the path specified can’t be found on the filesystem. The parameter exc must be a no-such-file-or-directory-exception object.

The procedure no-such-file-or-directory-exception? returns #t when obj is a no-such-file-or-directory-exception object and #f otherwise.

The procedure no-such-file-or-directory-exception-procedure returns the procedure that raised exc.

The procedure no-such-file-or-directory-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (no-such-file-or-directory-exception? exc)
        (list (no-such-file-or-directory-exception-procedure exc)
              (no-such-file-or-directory-exception-arguments exc))
        'not-no-such-file-or-directory-exception))
> (with-exception-catcher
    handler
    (lambda () (with-input-from-file "nofile" read)))
(#<procedure #2 with-input-from-file> ("nofile" #<procedure #3 read>))
(unbound-os-environment-variable-exception? obj)procedure
(unbound-os-environment-variable-exception-procedure exc)procedure
(unbound-os-environment-variable-exception-arguments exc)procedure

Unbound-os-environment-variable-exception objects are raised when an unbound operating-system environment variable is accessed by the procedures getenv and setenv. The parameter exc must be an unbound-os-environment-variable-exception object.

The procedure unbound-os-environment-variable-exception? returns #t when obj is an unbound-os-environment-variable-exception object and #f otherwise.

The procedure unbound-os-environment-variable-exception-procedure returns the procedure that raised exc.

The procedure unbound-os-environment-variable-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (unbound-os-environment-variable-exception? exc)
        (list (unbound-os-environment-variable-exception-procedure exc)
              (unbound-os-environment-variable-exception-arguments exc))
        'not-unbound-os-environment-variable-exception))
> (with-exception-catcher
    handler
    (lambda () (getenv "DOES_NOT_EXIST")))
(#<procedure #2 getenv> ("DOES_NOT_EXIST"))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.4 Exception objects related to threads

(scheduler-exception? obj)procedure
(scheduler-exception-reason exc)procedure

Scheduler-exception objects are raised by the scheduler when some operation requested from the host operating system failed (e.g. checking the status of the devices in order to wake up threads waiting to perform I/O on these devices). The parameter exc must be a scheduler-exception object.

The procedure scheduler-exception? returns #t when obj is a scheduler-exception object and #f otherwise.

The procedure scheduler-exception-reason returns the os-exception object that describes the failure detected by the scheduler.

(deadlock-exception? obj)procedure

Deadlock-exception objects are raised when the scheduler discovers that all threads are blocked and can make no further progress. In that case the scheduler unblocks the primordial-thread and forces it to raise a deadlock-exception object.

The procedure deadlock-exception? returns #t when obj is a deadlock-exception object and #f otherwise.

For example:

 
> (define (handler exc)
    (if (deadlock-exception? exc)
        exc
        'not-deadlock-exception))
> (with-exception-catcher
    handler
    (lambda () (read (open-vector))))
#<deadlock-exception #2>
(abandoned-mutex-exception? obj)procedure

Abandoned-mutex-exception objects are raised when the current thread locks a mutex that was owned by a thread which terminated (see mutex-lock!).

The procedure abandoned-mutex-exception? returns #t when obj is a abandoned-mutex-exception object and #f otherwise.

For example:

 
> (define (handler exc)
    (if (abandoned-mutex-exception? exc)
        exc
        'not-abandoned-mutex-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (let ((m (make-mutex)))
        (thread-join!
          (thread-start!
            (make-thread
              (lambda () (mutex-lock! m)))))
        (mutex-lock! m))))
#<abandoned-mutex-exception #2>
(join-timeout-exception? obj)procedure
(join-timeout-exception-procedure exc)procedure
(join-timeout-exception-arguments exc)procedure

Join-timeout-exception objects are raised when a call to the thread-join! procedure reaches its timeout before the target thread terminates and a timeout-value parameter is not specified. The parameter exc must be a join-timeout-exception object.

The procedure join-timeout-exception? returns #t when obj is a join-timeout-exception object and #f otherwise.

The procedure join-timeout-exception-procedure returns the procedure that raised exc.

The procedure join-timeout-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (join-timeout-exception? exc)
        (list (join-timeout-exception-procedure exc)
              (join-timeout-exception-arguments exc))
        'not-join-timeout-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (thread-join!
        (thread-start!
          (make-thread
            (lambda () (thread-sleep! 10))))
        5)))
(#<procedure #2 thread-join!> (#<thread #3> 5))
(started-thread-exception? obj)procedure
(started-thread-exception-procedure exc)procedure
(started-thread-exception-arguments exc)procedure

Started-thread-exception objects are raised when the target thread of a call to the procedure thread-start! is already started. The parameter exc must be a started-thread-exception object.

The procedure started-thread-exception? returns #t when obj is a started-thread-exception object and #f otherwise.

The procedure started-thread-exception-procedure returns the procedure that raised exc.

The procedure started-thread-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (started-thread-exception? exc)
        (list (started-thread-exception-procedure exc)
              (started-thread-exception-arguments exc))
        'not-started-thread-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (let ((t (make-thread (lambda () (expt 2 1000)))))
        (thread-start! t)
        (thread-start! t))))
(#<procedure #2 thread-start!> (#<thread #3>))
(terminated-thread-exception? obj)procedure
(terminated-thread-exception-procedure exc)procedure
(terminated-thread-exception-arguments exc)procedure

Terminated-thread-exception objects are raised when the thread-join! procedure is called and the target thread has terminated as a result of a call to the thread-terminate! procedure. The parameter exc must be a terminated-thread-exception object.

The procedure terminated-thread-exception? returns #t when obj is a terminated-thread-exception object and #f otherwise.

The procedure terminated-thread-exception-procedure returns the procedure that raised exc.

The procedure terminated-thread-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (terminated-thread-exception? exc)
        (list (terminated-thread-exception-procedure exc)
              (terminated-thread-exception-arguments exc))
        'not-terminated-thread-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (thread-join!
        (thread-start!
          (make-thread
            (lambda () (thread-terminate! (current-thread))))))))
(#<procedure #2 thread-join!> (#<thread #3>))
(uncaught-exception? obj)procedure
(uncaught-exception-procedure exc)procedure
(uncaught-exception-arguments exc)procedure
(uncaught-exception-reason exc)procedure

Uncaught-exception objects are raised when an object is raised in a thread and that thread does not handle it (i.e. the thread terminated because it did not catch an exception it raised). The parameter exc must be an uncaught-exception object.

The procedure uncaught-exception? returns #t when obj is an uncaught-exception object and #f otherwise.

The procedure uncaught-exception-procedure returns the procedure that raised exc.

The procedure uncaught-exception-arguments returns the list of arguments of the procedure that raised exc.

The procedure uncaught-exception-reason returns the object that was raised by the thread and not handled by that thread.

For example:

 
> (define (handler exc)
    (if (uncaught-exception? exc)
        (list (uncaught-exception-procedure exc)
              (uncaught-exception-arguments exc)
              (uncaught-exception-reason exc))
        'not-uncaught-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (thread-join!
        (thread-start!
          (make-thread
            (lambda () (open-input-file "data" 99)))))))
(#<procedure #2 thread-join!>
 (#<thread #3>)
 #<wrong-number-of-arguments-exception #4>)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.5 Exception objects related to C-interface

(cfun-conversion-exception? obj)procedure
(cfun-conversion-exception-procedure exc)procedure
(cfun-conversion-exception-arguments exc)procedure
(cfun-conversion-exception-code exc)procedure
(cfun-conversion-exception-message exc)procedure

Cfun-conversion-exception objects are raised by the C-interface when converting between the Scheme representation and the C representation of a value during a call from Scheme to C. The parameter exc must be a cfun-conversion-exception object.

The procedure cfun-conversion-exception? returns #t when obj is a cfun-conversion-exception object and #f otherwise.

The procedure cfun-conversion-exception-procedure returns the procedure that raised exc.

The procedure cfun-conversion-exception-arguments returns the list of arguments of the procedure that raised exc.

The procedure cfun-conversion-exception-code returns an exact integer error code that can be converted to a string by the err-code->string procedure.

The procedure cfun-conversion-exception-message returns #f or a string giving details of the exception in a human-readable form.

For example:

 
$ cat test1.scm
(define weird
  (c-lambda (char-string) nonnull-char-string
    "___result = ___arg1;"))
$ gsc test1.scm
$ gsi
Gambit v4.6.6

> (load "test1")
"/Users/feeley/gambit/doc/test1.o1"
> (weird "hello")
"hello"
> (define (handler exc)
    (if (cfun-conversion-exception? exc)
        (list (cfun-conversion-exception-procedure exc)
              (cfun-conversion-exception-arguments exc)
              (err-code->string (cfun-conversion-exception-code exc))
              (cfun-conversion-exception-message exc))
        'not-cfun-conversion-exception))
> (with-exception-catcher
    handler
    (lambda () (weird 'not-a-string)))
(#<procedure #2 weird>
 (not-a-string)
 "(Argument 1) Can't convert to C char-string"
 #f)
> (with-exception-catcher
    handler
    (lambda () (weird #f)))
(#<procedure #2 weird>
 (#f)
 "Can't convert result from C nonnull-char-string"
 #f)
(sfun-conversion-exception? obj)procedure
(sfun-conversion-exception-procedure exc)procedure
(sfun-conversion-exception-arguments exc)procedure
(sfun-conversion-exception-code exc)procedure
(sfun-conversion-exception-message exc)procedure

Sfun-conversion-exception objects are raised by the C-interface when converting between the Scheme representation and the C representation of a value during a call from C to Scheme. The parameter exc must be a sfun-conversion-exception object.

The procedure sfun-conversion-exception? returns #t when obj is a sfun-conversion-exception object and #f otherwise.

The procedure sfun-conversion-exception-procedure returns the procedure that raised exc.

The procedure sfun-conversion-exception-arguments returns the list of arguments of the procedure that raised exc.

The procedure sfun-conversion-exception-code returns an exact integer error code that can be converted to a string by the err-code->string procedure.

The procedure sfun-conversion-exception-message returns #f or a string giving details of the exception in a human-readable form.

For example:

 
$ cat test2.scm
(c-define (f str) (nonnull-char-string) int "f" ""
  (string->number str))
(define t1 (c-lambda () int "___result = f (\"123\");"))
(define t2 (c-lambda () int "___result = f (0);"))
(define t3 (c-lambda () int "___result = f (\"1.5\");"))
$ gsc test2.scm
$ gsi
Gambit v4.6.6

> (load "test2")
"/u/feeley/test2.o1"
> (t1)
123
> (define (handler exc)
    (if (sfun-conversion-exception? exc)
        (list (sfun-conversion-exception-procedure exc)
              (sfun-conversion-exception-arguments exc)
              (err-code->string (sfun-conversion-exception-code exc))
              (sfun-conversion-exception-message exc))
        'not-sfun-conversion-exception))
> (with-exception-catcher handler t2)
(#<procedure #2 f>
 ()
 "(Argument 1) Can't convert from C nonnull-char-string"
 #f)
> (with-exception-catcher handler t3)
(#<procedure #2 f> () "Can't convert result to C int" #f)
(multiple-c-return-exception? obj)procedure

Multiple-c-return-exception objects are raised by the C-interface when a C to Scheme procedure call returns and that call’s stack frame is no longer on the C stack because the call has already returned, or has been removed from the C stack by a longjump.

The procedure multiple-c-return-exception? returns #t when obj is a multiple-c-return-exception object and #f otherwise.

For example:

 
$ cat test3.scm
(c-define (f str) (char-string) scheme-object "f" ""
  (pp (list 'entry 'str= str))
  (let ((k (call-with-current-continuation (lambda (k) k))))
    (pp (list 'exit 'k= k))
    k))
(define scheme-to-c-to-scheme-and-back
  (c-lambda (char-string) scheme-object
    "___result = f (___arg1);"))
$ gsc test3.scm
$ gsi
Gambit v4.6.6

> (load "test3")
"/Users/feeley/gambit/doc/test3.o1"
> (define (handler exc)
    (if (multiple-c-return-exception? exc)
        exc
        'not-multiple-c-return-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (let ((c (scheme-to-c-to-scheme-and-back "hello")))
        (pp c)
        (c 999))))
(entry str= "hello")
(exit k= #<procedure #2>)
#<procedure #2>
(exit k= 999)
#<multiple-c-return-exception #3>

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.6 Exception objects related to the reader

(datum-parsing-exception? obj)procedure
(datum-parsing-exception-kind exc)procedure
(datum-parsing-exception-parameters exc)procedure
(datum-parsing-exception-readenv exc)procedure

Datum-parsing-exception objects are raised by the reader (i.e. the read procedure) when the input does not conform to the grammar for datum. The parameter exc must be a datum-parsing-exception object.

The procedure datum-parsing-exception? returns #t when obj is a datum-parsing-exception object and #f otherwise.

The procedure datum-parsing-exception-kind returns a symbol denoting the kind of parsing error that was encountered by the reader when it raised exc. Here is a table of the possible return values:

datum-or-eof-expectedDatum or EOF expected
datum-expectedDatum expected
improperly-placed-dotImproperly placed dot
incomplete-form-eof-reachedIncomplete form, EOF reached
incomplete-formIncomplete form
character-out-of-rangeCharacter out of range
invalid-character-nameInvalid ’#\’ name
illegal-characterIllegal character
s8-expectedSigned 8 bit exact integer expected
u8-expectedUnsigned 8 bit exact integer expected
s16-expectedSigned 16 bit exact integer expected
u16-expectedUnsigned 16 bit exact integer expected
s32-expectedSigned 32 bit exact integer expected
u32-expectedUnsigned 32 bit exact integer expected
s64-expectedSigned 64 bit exact integer expected
u64-expectedUnsigned 64 bit exact integer expected
inexact-real-expectedInexact real expected
invalid-hex-escapeInvalid hexadecimal escape
invalid-escaped-characterInvalid escaped character
open-paren-expected’(’ expected
invalid-tokenInvalid token
invalid-sharp-bang-nameInvalid ’#!’ name
duplicate-label-definitionDuplicate definition for label
missing-label-definitionMissing definition for label
illegal-label-definitionIllegal definition of label
invalid-infix-syntax-characterInvalid infix syntax character
invalid-infix-syntax-numberInvalid infix syntax number
invalid-infix-syntaxInvalid infix syntax

The procedure datum-parsing-exception-parameters returns a list of the parameters associated with the parsing error that was encountered by the reader when it raised exc.

For example:

 
> (define (handler exc)
    (if (datum-parsing-exception? exc)
        (list (datum-parsing-exception-kind exc)
              (datum-parsing-exception-parameters exc))
        'not-datum-parsing-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (with-input-from-string "(s #\\pace)" read)))
(invalid-character-name ("pace"))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.7 Exception objects related to evaluation and compilation

(expression-parsing-exception? obj)procedure
(expression-parsing-exception-kind exc)procedure
(expression-parsing-exception-parameters exc)procedure
(expression-parsing-exception-source exc)procedure

Expression-parsing-exception objects are raised by the evaluator and compiler (i.e. the procedures eval, compile-file, etc) when the input does not conform to the grammar for expression. The parameter exc must be a expression-parsing-exception object.

The procedure expression-parsing-exception? returns #t when obj is a expression-parsing-exception object and #f otherwise.

The procedure expression-parsing-exception-kind returns a symbol denoting the kind of parsing error that was encountered by the evaluator or compiler when it raised exc. Here is a table of the possible return values:

id-expectedIdentifier expected
ill-formed-namespaceIll-formed namespace
ill-formed-namespace-prefixIll-formed namespace prefix
namespace-prefix-must-be-stringNamespace prefix must be a string
macro-used-as-variableMacro name can’t be used as a variable
variable-is-immutableVariable is immutable
ill-formed-macro-transformerMacro transformer must be a lambda expression
reserved-used-as-variableReserved identifier can’t be used as a variable
ill-formed-special-formIll-formed special form
cannot-open-fileCan’t open file
filename-expectedFilename expected
ill-placed-defineIll-placed ’define’
ill-placed-**includeIll-placed ’##include’
ill-placed-**define-macroIll-placed ’##define-macro’
ill-placed-**declareIll-placed ’##declare’
ill-placed-**namespaceIll-placed ’##namespace’
ill-formed-expressionIll-formed expression
unsupported-special-formInterpreter does not support
ill-placed-unquoteIll-placed ’unquote’
ill-placed-unquote-splicingIll-placed ’unquote-splicing’
parameter-must-be-idParameter must be an identifier
parameter-must-be-id-or-defaultParameter must be an identifier or default binding
duplicate-parameterDuplicate parameter in parameter list
ill-placed-dotted-rest-parameterIll-placed dotted rest parameter
parameter-expected-after-rest#!rest must be followed by a parameter
ill-formed-defaultIll-formed default binding
ill-placed-optionalIll-placed #!optional
ill-placed-restIll-placed #!rest
ill-placed-keyIll-placed #!key
key-expected-after-rest#!key expected after rest parameter
ill-placed-defaultIll-placed default binding
duplicate-variable-definitionDuplicate definition of a variable
empty-bodyBody must contain at least one expression
variable-must-be-idDefined variable must be an identifier
else-clause-not-lastElse clause must be last
ill-formed-selector-listIll-formed selector list
duplicate-variable-bindingDuplicate variable in bindings
ill-formed-binding-listIll-formed binding list
ill-formed-callIll-formed procedure call
ill-formed-cond-expandIll-formed ’cond-expand’
unfulfilled-cond-expandUnfulfilled ’cond-expand’

The procedure expression-parsing-exception-parameters returns a list of the parameters associated with the parsing error that was encountered by the evaluator or compiler when it raised exc.

For example:

 
> (define (handler exc)
    (if (expression-parsing-exception? exc)
        (list (expression-parsing-exception-kind exc)
              (expression-parsing-exception-parameters exc))
        'not-expression-parsing-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (eval '(+ do 1))))
(reserved-used-as-variable (do))
(unbound-global-exception? obj)procedure
(unbound-global-exception-variable exc)procedure
(unbound-global-exception-code exc)procedure
(unbound-global-exception-rte exc)procedure

Unbound-global-exception objects are raised when an unbound global variable is accessed. The parameter exc must be an unbound-global-exception object.

The procedure unbound-global-exception? returns #t when obj is an unbound-global-exception object and #f otherwise.

The procedure unbound-global-exception-variable returns a symbol identifying the unbound global variable.

For example:

 
> (define (handler exc)
    (if (unbound-global-exception? exc)
        (list 'variable= (unbound-global-exception-variable exc))
        'not-unbound-global-exception))
> (with-exception-catcher
    handler
    (lambda () foo))
(variable= foo)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.8 Exception objects related to type checking

(type-exception? obj)procedure
(type-exception-procedure exc)procedure
(type-exception-arguments exc)procedure
(type-exception-arg-num exc)procedure
(type-exception-type-id exc)procedure

Type-exception objects are raised when a primitive procedure is called with an argument of incorrect type (i.e. when a run time type-check fails). The parameter exc must be a type-exception object.

The procedure type-exception? returns #t when obj is a type-exception object and #f otherwise.

The procedure type-exception-procedure returns the procedure that raised exc.

The procedure type-exception-arguments returns the list of arguments of the procedure that raised exc.

The procedure type-exception-arg-num returns the position of the argument whose type is incorrect. Position 1 is the first argument.

The procedure type-exception-type-id returns an identifier of the type expected. The type-id can be a symbol, such as number and string-or-nonnegative-fixnum, or a record type descriptor.

For example:

 
> (define (handler exc)
    (if (type-exception? exc)
        (list (type-exception-procedure exc)
              (type-exception-arguments exc)
              (type-exception-arg-num exc)
              (type-exception-type-id exc))
        'not-type-exception))
> (with-exception-catcher
    handler
    (lambda () (vector-ref '#(a b c) 'foo)))
(#<procedure #2 vector-ref> (#(a b c) foo) 2 exact-integer)
> (with-exception-catcher
    handler
    (lambda () (time->seconds 'foo)))
(#<procedure #3 time->seconds> (foo) 1 #<type #4 time>)
(range-exception? obj)procedure
(range-exception-procedure exc)procedure
(range-exception-arguments exc)procedure
(range-exception-arg-num exc)procedure

Range-exception objects are raised when a numeric parameter is not in the allowed range. The parameter exc must be a range-exception object.

The procedure range-exception? returns #t when obj is a range-exception object and #f otherwise.

The procedure range-exception-procedure returns the procedure that raised exc.

The procedure range-exception-arguments returns the list of arguments of the procedure that raised exc.

The procedure range-exception-arg-num returns the position of the argument which is not in the allowed range. Position 1 is the first argument.

For example:

 
> (define (handler exc)
    (if (range-exception? exc)
        (list (range-exception-procedure exc)
              (range-exception-arguments exc)
              (range-exception-arg-num exc))
        'not-range-exception))
> (with-exception-catcher
    handler
    (lambda () (string-ref "abcde" 10)))
(#<procedure #2 string-ref> ("abcde" 10) 2)
(divide-by-zero-exception? obj)procedure
(divide-by-zero-exception-procedure exc)procedure
(divide-by-zero-exception-arguments exc)procedure

Divide-by-zero-exception objects are raised when a division by zero is attempted. The parameter exc must be a divide-by-zero-exception object.

The procedure divide-by-zero-exception? returns #t when obj is a divide-by-zero-exception object and #f otherwise.

The procedure divide-by-zero-exception-procedure returns the procedure that raised exc.

The procedure divide-by-zero-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (divide-by-zero-exception? exc)
        (list (divide-by-zero-exception-procedure exc)
              (divide-by-zero-exception-arguments exc))
        'not-divide-by-zero-exception))
> (with-exception-catcher
    handler
    (lambda () (/ 5 0 7)))
(#<procedure #2 /> (5 0 7))
(improper-length-list-exception? obj)procedure
(improper-length-list-exception-procedure exc)procedure
(improper-length-list-exception-arguments exc)procedure
(improper-length-list-exception-arg-num exc)procedure

Improper-length-list-exception objects are raised by the map and for-each procedures when they are called with two or more list arguments and the lists are not of the same length. The parameter exc must be an improper-length-list-exception object.

The procedure improper-length-list-exception? returns #t when obj is an improper-length-list-exception object and #f otherwise.

The procedure improper-length-list-exception-procedure returns the procedure that raised exc.

The procedure improper-length-list-exception-arguments returns the list of arguments of the procedure that raised exc.

The procedure improper-length-list-exception-arg-num returns the position of the argument whose length is the shortest. Position 1 is the first argument.

For example:

 
> (define (handler exc)
    (if (improper-length-list-exception? exc)
        (list (improper-length-list-exception-procedure exc)
              (improper-length-list-exception-arguments exc)
              (improper-length-list-exception-arg-num exc))
        'not-improper-length-list-exception))
> (with-exception-catcher
    handler
    (lambda () (map + '(1 2) '(3) '(4 5))))
(#<procedure #2 map> (#<procedure #3 +> (1 2) (3) (4 5)) 3)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.9 Exception objects related to procedure call

(wrong-number-of-arguments-exception? obj)procedure
(wrong-number-of-arguments-exception-procedure exc)procedure
(wrong-number-of-arguments-exception-arguments exc)procedure

Wrong-number-of-arguments-exception objects are raised when a procedure is called with the wrong number of arguments. The parameter exc must be a wrong-number-of-arguments-exception object.

The procedure wrong-number-of-arguments-exception? returns #t when obj is a wrong-number-of-arguments-exception object and #f otherwise.

The procedure wrong-number-of-arguments-exception-procedure returns the procedure that raised exc.

The procedure wrong-number-of-arguments-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (wrong-number-of-arguments-exception? exc)
        (list (wrong-number-of-arguments-exception-procedure exc)
              (wrong-number-of-arguments-exception-arguments exc))
        'not-wrong-number-of-arguments-exception))
> (with-exception-catcher
    handler
    (lambda () (open-input-file "data" 99)))
(#<procedure #2 open-input-file> ("data" 99))
(number-of-arguments-limit-exception? obj)procedure
(number-of-arguments-limit-exception-procedure exc)procedure
(number-of-arguments-limit-exception-arguments exc)procedure

Number-of-arguments-limit-exception objects are raised by the apply procedure when the procedure being called is passed more than 8192 arguments. The parameter exc must be a number-of-arguments-limit-exception object.

The procedure number-of-arguments-limit-exception? returns #t when obj is a number-of-arguments-limit-exception object and #f otherwise.

The procedure number-of-arguments-limit-exception-procedure returns the target procedure of the call to apply that raised exc.

The procedure number-of-arguments-limit-exception-arguments returns the list of arguments of the target procedure of the call to apply that raised exc.

For example:

 
> (define (iota n) (if (= n 0) '() (cons n (iota (- n 1)))))
> (define (handler exc)
    (if (number-of-arguments-limit-exception? exc)
        (list (number-of-arguments-limit-exception-procedure exc)
              (length (number-of-arguments-limit-exception-arguments exc)))
        'not-number-of-arguments-limit-exception))
> (with-exception-catcher
    handler
    (lambda () (apply + 1 2 3 (iota 8190))))
(#<procedure #2 +> 8193)
(nonprocedure-operator-exception? obj)procedure
(nonprocedure-operator-exception-operator exc)procedure
(nonprocedure-operator-exception-arguments exc)procedure
(nonprocedure-operator-exception-code exc)procedure
(nonprocedure-operator-exception-rte exc)procedure

Nonprocedure-operator-exception objects are raised when a procedure call is executed and the operator position is not a procedure. The parameter exc must be an nonprocedure-operator-exception object.

The procedure nonprocedure-operator-exception? returns #t when obj is an nonprocedure-operator-exception object and #f otherwise.

The procedure nonprocedure-operator-exception-operator returns the value in operator position of the procedure call that raised exc.

The procedure nonprocedure-operator-exception-arguments returns the list of arguments of the procedure call that raised exc.

For example:

 
> (define (handler exc)
    (if (nonprocedure-operator-exception? exc)
        (list (nonprocedure-operator-exception-operator exc)
              (nonprocedure-operator-exception-arguments exc))
        'not-nonprocedure-operator-exception))
> (with-exception-catcher
    handler
    (lambda () (11 22 33)))
(11 (22 33))
(unknown-keyword-argument-exception? obj)procedure
(unknown-keyword-argument-exception-procedure exc)procedure
(unknown-keyword-argument-exception-arguments exc)procedure

Unknown-keyword-argument-exception objects are raised when a procedure accepting keyword arguments is called and one of the keywords supplied is not among those that are expected. The parameter exc must be an unknown-keyword-argument-exception object.

The procedure unknown-keyword-argument-exception? returns #t when obj is an unknown-keyword-argument-exception object and #f otherwise.

The procedure unknown-keyword-argument-exception-procedure returns the procedure that raised exc.

The procedure unknown-keyword-argument-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (unknown-keyword-argument-exception? exc)
        (list (unknown-keyword-argument-exception-procedure exc)
              (unknown-keyword-argument-exception-arguments exc))
        'not-unknown-keyword-argument-exception))
> (with-exception-catcher
    handler
    (lambda () ((lambda (#!key (foo 5)) foo) bar: 11)))
(#<procedure #2> (bar: 11))
(keyword-expected-exception? obj)procedure
(keyword-expected-exception-procedure exc)procedure
(keyword-expected-exception-arguments exc)procedure

Keyword-expected-exception objects are raised when a procedure accepting keyword arguments is called and a nonkeyword was supplied where a keyword was expected. The parameter exc must be an keyword-expected-exception object.

The procedure keyword-expected-exception? returns #t when obj is an keyword-expected-exception object and #f otherwise.

The procedure keyword-expected-exception-procedure returns the procedure that raised exc.

The procedure keyword-expected-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (keyword-expected-exception? exc)
        (list (keyword-expected-exception-procedure exc)
              (keyword-expected-exception-arguments exc))
        'not-keyword-expected-exception))
> (with-exception-catcher
    handler
    (lambda () ((lambda (#!key (foo 5)) foo) 11 22)))
(#<procedure #2> (11 22))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

15.10 Other exception objects

(error-exception? obj)procedure
(error-exception-message exc)procedure
(error-exception-parameters exc)procedure
(error message obj)procedure

Error-exception objects are raised when the error procedure is called. The parameter exc must be an error-exception object.

The procedure error-exception? returns #t when obj is an error-exception object and #f otherwise.

The procedure error-exception-message returns the first argument of the call to error that raised exc.

The procedure error-exception-parameters returns the list of arguments, starting with the second argument, of the call to error that raised exc.

The error procedure raises an error-exception object whose message field is message and parameters field is the list of values obj….

For example:

 
> (define (handler exc)
    (if (error-exception? exc)
        (list (error-exception-message exc)
              (error-exception-parameters exc))
        'not-error-exception))
> (with-exception-catcher
    handler
    (lambda () (error "unexpected object:" 123)))
("unexpected object:" (123))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16. Host environment

The host environment is the set of resources, such as the filesystem, network and processes, that are managed by the operating system within which the Scheme program is executing. This chapter specifies how the host environment can be accessed from within the Scheme program.

In this chapter we say that the Scheme program being executed is a process, even though the concept of process does not exist in some operating systems supported by Gambit (e.g. MSDOS).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.1 Handling of file names

Gambit uses a naming convention for files that is compatible with the one used by the host environment but extended to allow referring to the home directory of the current user or some specific user and the installation directories.

A path is a string that denotes a file, for example "src/readme.txt". Each component of a path is separated by a ‘/’ under UNIX and Mac OS X and by a ‘/’ or ‘\’ under MSDOS and Microsoft Windows. A leading separator indicates an absolute path under UNIX, Mac OS X, MSDOS and Microsoft Windows. A path which does not contain a path separator is relative to the current working directory on all operating systems. A volume specifier such as ‘C:’ may prefix a file name under MSDOS and Microsoft Windows.

A path which starts with the characters ‘~~’ denotes a file in an installation directory. If nothing follows the ‘~~’ then the directory denoted is the central installation directory. Otherwise what follows the ‘~~’ is the name of the installation directory, for example ‘~~lib’ denotes the ‘lib’ installation directory. Note that the location of the installation directories may be overridden by using the ‘-:=DIRECTORY’ and ‘-:~~DIR=DIRECTORY’ runtime options or by defining the ‘GAMBCOPT’ environment variable.

A path which starts with the character ‘~’ not followed by ‘~’ denotes a file in the user’s home directory. The user’s home directory is contained in the ‘HOME’ environment variable under UNIX, Mac OS X, MSDOS and Microsoft Windows. Under MSDOS and Microsoft Windows, if the ‘HOME’ environment variable is not defined, the environment variables ‘HOMEDRIVE’ and ‘HOMEPATH’ are concatenated if they are defined. If this fails to yield a home directory, the central installation directory is used instead.

A path which starts with the characters ‘~username’ denotes a file in the home directory of the given user. Under UNIX and Mac OS X this is found using the password file. There is no equivalent under MSDOS and Microsoft Windows.

(current-directory [new-current-directory])procedure

The parameter object current-directory is bound to the current working directory. Calling this procedure with no argument returns the absolute normalized path of the directory and calling this procedure with one argument sets the directory to new-current-directory. The initial binding of this parameter object is the current working directory of the current process. The path returned by current-directory always contains a trailing directory separator. Modifications of the parameter object do not change the current working directory of the current process (i.e. that is accessible with the UNIX getcwd() function and the Microsoft Windows GetCurrentDirectory function). It is an error to mutate the string returned by current-directory.

For example under UNIX:

 
> (current-directory)
"/Users/feeley/gambit/doc/"
> (current-directory "..")
> (current-directory)
"/Users/feeley/gambit/"
> (path-expand "foo" "~~")
"/usr/local/Gambit-C/foo"
> (parameterize ((current-directory "~~")) (path-expand "foo"))
"/usr/local/Gambit-C/foo"
(path-expand path [origin-directory])procedure

The procedure path-expand takes the path of a file or directory and returns an expanded path, which is an absolute path when path or origin-directory are absolute paths. The optional origin-directory parameter, which defaults to the current working directory, is the directory used to resolve relative paths. Components of the paths path and origin-directory need not exist.

For example under UNIX:

 
> (path-expand "foo")
"/Users/feeley/gambit/doc/foo"
> (path-expand "~/foo")
"/Users/feeley/foo"
> (path-expand "~~lib/foo")
"/usr/local/Gambit-C/lib/foo"
> (path-expand "../foo")
"/Users/feeley/gambit/doc/../foo"
> (path-expand "foo" "")
"foo"
> (path-expand "foo" "/tmp")
"/tmp/foo"
> (path-expand "this/file/does/not/exist")
"/Users/feeley/gambit/doc/this/file/does/not/exist"
> (path-expand "")
"/Users/feeley/gambit/doc/"
(path-normalize path [allow-relative? [origin-directory]])procedure

The procedure path-normalize takes a path of a file or directory and returns its normalized path. The optional origin-directory parameter, which defaults to the current working directory, is the directory used to resolve relative paths. All components of the paths path and origin-directory must exist, except possibly the last component of path. A normalized path is a path containing no redundant parts and which is consistent with the current structure of the filesystem. A normalized path of a directory will always end with a path separator (i.e. ‘/’, ‘\’, or ‘:’ depending on the operating system). The optional allow-relative? parameter, which defaults to #f, indicates if the path returned can be expressed relatively to origin-directory: a #f requests an absolute path, the symbol shortest requests the shortest of the absolute and relative paths, and any other value requests the relative path. The shortest path is useful for interaction with the user because short relative paths are typically easier to read than long absolute paths.

For example under UNIX:

 
> (path-expand "../foo")
"/Users/feeley/gambit/doc/../foo"
> (path-normalize "../foo")
"/Users/feeley/gambit/foo"
> (path-normalize "this/file/does/not/exist")
*** ERROR IN (console)@3.1 -- No such file or directory
(path-normalize "this/file/does/not/exist")
(path-extension path)procedure
(path-strip-extension path)procedure
(path-directory path)procedure
(path-strip-directory path)procedure
(path-strip-trailing-directory-separator path)procedure
(path-volume path)procedure
(path-strip-volume path)procedure

These procedures extract various parts of a path, which need not be a normalized path. The procedure path-extension returns the file extension (including the period) or the empty string if there is no extension. The procedure path-strip-extension returns the path with the extension stripped off. The procedure path-directory returns the file’s directory (including the last path separator) or the empty string if no directory is specified in the path. The procedure path-strip-directory returns the path with the directory stripped off. The procedure path-strip-trailing-directory-separator returns the path with the directory separator stripped off if one is at the end of the path. The procedure path-volume returns the file’s volume (including the last path separator) or the empty string if no volume is specified in the path. The procedure path-strip-volume returns the path with the volume stripped off.

For example under UNIX:

 
> (path-extension "/tmp/foo")
""
> (path-extension "/tmp/foo.txt")
".txt"
> (path-strip-extension "/tmp/foo.txt")
"/tmp/foo"
> (path-directory "/tmp/foo.txt")
"/tmp/"
> (path-strip-directory "/tmp/foo.txt")
"foo.txt"
> (path-strip-trailing-directory-separator "/usr/local/bin/")
"/usr/local/bin"
> (path-strip-trailing-directory-separator "/usr/local/bin")
"/usr/local/bin"
> (path-volume "/tmp/foo.txt")
""
> (path-volume "C:/tmp/foo.txt")
"" ; result is "C:" under Microsoft Windows
> (path-strip-volume "C:/tmp/foo.txt")
"C:/tmp/foo.txt" ; result is "/tmp/foo.txt" under Microsoft Windows

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.2 Filesystem operations

(create-directory path-or-settings)procedure

This procedure creates a directory. The argument path-or-settings is either a string denoting a filesystem path or a list of port settings which must contain a path: setting. Here are the settings allowed:

For example:

 
> (create-directory "newdir")
> (create-directory "newdir")
*** ERROR IN (console)@2.1 -- File exists
(create-directory "newdir")
(create-fifo path-or-settings)procedure

This procedure creates a FIFO. The argument path-or-settings is either a string denoting a filesystem path or a list of port settings which must contain a path: setting. Here are the settings allowed:

For example:

 
> (create-fifo "fifo")
> (define a (open-input-file "fifo"))
> (define b (open-output-file "fifo"))
> (display "1 22 333" b)
> (force-output b)
> (read a)
1
> (read a)
22
(create-link source-path destination-path)procedure

This procedure creates a hard link between source-path and destination-path. The argument source-path must be a string denoting the path of an existing file. The argument destination-path must be a string denoting the path of the link to create.

(create-symbolic-link source-path destination-path)procedure

This procedure creates a symbolic link between source-path and destination-path. The argument source-path must be a string denoting the path of an existing file. The argument destination-path must be a string denoting the path of the symbolic link to create.

(rename-file source-path destination-path)procedure

This procedure renames the file source-path to destination-path. The argument source-path must be a string denoting the path of an existing file. The argument destination-path must be a string denoting the new path of the file.

(copy-file source-path destination-path)procedure

This procedure copies the file source-path to destination-path. The argument source-path must be a string denoting the path of an existing file. The argument destination-path must be a string denoting the path of the file to create.

(delete-file path)procedure

This procedure deletes the file path. The argument path must be a string denoting the path of an existing file.

(delete-directory path)procedure

This procedure deletes the directory path. The argument path must be a string denoting the path of an existing directory.

(directory-files [path-or-settings])procedure

This procedure returns the list of the files in a directory. The argument path-or-settings is either a string denoting a filesystem path to a directory or a list of settings which must contain a path: setting. If it is not specified, path-or-settings defaults to the current directory (the value bound to the current-directory parameter object). Here are the settings allowed:

For example:

 
> (directory-files)
("complex" "README" "simple")
> (directory-files "../include")
("config.h" "config.h.in" "gambit.h" "makefile" "makefile.in")
> (directory-files (list path: "../include" ignore-hidden: #f))
("." ".." "config.h" "config.h.in" "gambit.h" "makefile" "makefile.in")

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.3 Shell command execution

(shell-command command)procedure

The procedure shell-command calls up the shell to execute command which must be a string. This procedure returns the exit status of the shell in the form that the C library’s system routine returns.

For example under UNIX:

 
> (shell-command "ls -sk f*.scm")
4 fact.scm   4 fib.scm
0

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.4 Process termination

(exit [status])procedure

The procedure exit causes the process to terminate with the status status which must be an exact integer in the range 0 to 255. If it is not specified, status defaults to 0.

For example under UNIX:

 
$ gsi
Gambit v4.6.6

> (exit 42)
$ echo $?
42

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.5 Command line arguments

(command-line)procedure

This procedure returns a list of strings corresponding to the command line arguments, including the program file name as the first element of the list. When the interpreter executes a Scheme script, the list returned by command-line contains the script’s absolute path followed by the remaining command line arguments.

For example under UNIX:

 
$ gsi -:d -e "(pretty-print (command-line))"
("gsi" "-e" "(pretty-print (command-line))")
$ cat foo
#!/usr/local/Gambit-C/bin/gsi-script
(pretty-print (command-line))
$ ./foo 1 2 "3 4"
("/u/feeley/./foo" "1" "2" "3 4")

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.6 Environment variables

(getenv name [default])procedure
(setenv name [new-value])procedure

The procedure getenv returns the value of the environment variable name of the current process. Variable names are denoted with strings. A string is returned if the environment variable is bound, otherwise default is returned if it is specified, otherwise an exception is raised.

The procedure setenv changes the binding of the environment variable name to new-value which must be a string. If new-value is not specified the binding is removed.

For example under UNIX:

 
> (getenv "HOME")
"/Users/feeley"
> (getenv "DOES_NOT_EXIST" #f)
#f
> (setenv "DOES_NOT_EXIST" "it does now")
> (getenv "DOES_NOT_EXIST" #f)
"it does now"
> (setenv "DOES_NOT_EXIST")
> (getenv "DOES_NOT_EXIST" #f)
#f
> (getenv "DOES_NOT_EXIST")
*** ERROR IN (console)@7.1 -- Unbound OS environment variable
(getenv "DOES_NOT_EXIST")

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.7 Measuring time

Procedures are available for measuring real time (aka “wall” time) and cpu time (the amount of time the cpu has been executing the process). The resolution of the real time and cpu time clock is operating system dependent. Typically the resolution of the cpu time clock is rather coarse (measured in “ticks” of 1/60th or 1/100th of a second). Real time is internally computed relative to some arbitrary point in time using floating point numbers, which means that there is a gradual loss of resolution as time elapses. Moreover, some operating systems report time in number of ticks using a 32 bit integer so the value returned by the time related procedures may wraparound much before any significant loss of resolution occurs (for example 2.7 years if ticks are 1/50th of a second).

(current-time)procedure
(time? obj)procedure
(time->seconds time)procedure
(seconds->time x)procedure

The procedure current-time returns a time object representing the current point in real time.

The procedure time? returns #t when obj is a time object and #f otherwise.

The procedure time->seconds converts the time object time into an inexact real number representing the number of seconds elapsed since the “epoch” (which is 00:00:00 Coordinated Universal Time 01-01-1970).

The procedure seconds->time converts the real number x representing the number of seconds elapsed since the “epoch” into a time object.

For example:

 
> (current-time)
#<time #2>
> (time? (current-time))
#t
> (time? 123)
#f
> (time->seconds (current-time))
1083118758.63973
> (time->seconds (current-time))
1083118759.909163
> (seconds->time (+ 10 (time->seconds (current-time))
#<time #3>  ; a time object representing 10 seconds in the future
(process-times)procedure
(cpu-time)procedure
(real-time)procedure

The procedure process-times returns a three element f64vector containing the cpu time that has been used by the program and the real time that has elapsed since it was started. The first element corresponds to “user” time in seconds, the second element corresponds to “system” time in seconds and the third element is the elapsed real time in seconds. On operating systems that can’t differentiate user and system time, the system time is zero. On operating systems that can’t measure cpu time, the user time is equal to the elapsed real time and the system time is zero.

The procedure cpu-time returns the cpu time in seconds that has been used by the program (user time plus system time).

The procedure real-time returns the real time that has elapsed since the program was started.

For example:

 
> (process-times)
#f64(.02794 .021754 .159926176071167)
> (cpu-time)
.051223
> (real-time)
.40660619735717773
(time expr)special form

The time special form evaluates expr and returns the result. As a side effect it displays a message on the interaction channel which indicates how long the evaluation took (in real time and cpu time), how much time was spent in the garbage collector, how much memory was allocated during the evaluation and how many minor and major page faults occured (0 is reported if not running under UNIX).

For example:

 
> (define (f x)
    (let loop ((x x) (lst '()))
      (if (= x 0)
          lst
          (loop (- x 1) (cons x lst)))))
> (length (time (f 100000)))
(time (f 100000))
    683 ms real time
    558 ms cpu time (535 user, 23 system)
    8 collections accounting for 102 ms real time (70 user, 5 system)
    6400160 bytes allocated
    no minor faults
    no major faults
100000

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.8 File information

(file-exists? path [chase?])procedure

The path argument must be a string. This procedure returns #t when a file by that name exists, and returns #f otherwise.

When chase? is present and #f, symbolic links will not be chased, in other words if path refers to a symbolic link, file-exists? will return #t whether or not it points to an existing file.

For example:

 
> (file-exists? "nofile")
#f
(file-info path [chase?])procedure

This procedure accesses the filesystem to get information about the file whose location is given by the string path. A file-information record is returned that contains the file’s type, the device number, the inode number, the mode (permission bits), the number of links, the file’s user id, the file’s group id, the file’s size in bytes, the times of last-access, last-modification and last-change, the attributes, and the creation time.

When chase? is present and #f, symbolic links will not be chased, in other words if path refers to a symbolic link the file-info procedure will return information about the link rather than the file it links to.

For example:

 
> (file-info "/dev/tty")
#<file-info #2
   type: character-special
   device: 19513156
   inode: 20728196
   mode: 438
   number-of-links: 1
   owner: 0
   group: 0
   size: 0
   last-access-time: #<time #3>
   last-modification-time: #<time #4>
   last-change-time: #<time #5>
   attributes: 128
   creation-time: #<time #6>>
(file-info? obj)procedure

This procedure returns #t when obj is a file-information record and #f otherwise.

For example:

 
> (file-info? (file-info "/dev/tty"))
#t
> (file-info? 123)
#f
(file-info-type file-info)procedure

Returns the type field of the file-information record file-info. The type is denoted by a symbol. The following types are possible:

regular

Regular file

directory

Directory

character-special

Character special device

block-special

Block special device

fifo

FIFO

symbolic-link

Symbolic link

socket

Socket

unknown

File is of an unknown type

For example:

 
> (file-info-type (file-info "/dev/tty"))
character-special
> (file-info-type (file-info "/dev"))
directory
(file-info-device file-info)procedure

Returns the device field of the file-information record file-info.

For example:

 
> (file-info-device (file-info "/dev/tty"))
19513156
(file-info-inode file-info)procedure

Returns the inode field of the file-information record file-info.

For example:

 
> (file-info-inode (file-info "/dev/tty"))
20728196
(file-info-mode file-info)procedure

Returns the mode field of the file-information record file-info.

For example:

 
> (file-info-mode (file-info "/dev/tty"))
438
(file-info-number-of-links file-info)procedure

Returns the number-of-links field of the file-information record file-info.

For example:

 
> (file-info-number-of-links (file-info "/dev/tty"))
1
(file-info-owner file-info)procedure

Returns the owner field of the file-information record file-info.

For example:

 
> (file-info-owner (file-info "/dev/tty"))
0
(file-info-group file-info)procedure

Returns the group field of the file-information record file-info.

For example:

 
> (file-info-group (file-info "/dev/tty"))
0
(file-info-size file-info)procedure

Returns the size field of the file-information record file-info.

For example:

 
> (file-info-size (file-info "/dev/tty"))
0
(file-info-last-access-time file-info)procedure

Returns the last-access-time field of the file-information record file-info.

For example:

 
> (file-info-last-access-time (file-info "/dev/tty"))
#<time #2>
(file-info-last-modification-time file-info)procedure

Returns the last-modification-time field of the file-information record file-info.

For example:

 
> (file-info-last-modification-time (file-info "/dev/tty"))
#<time #2>
(file-info-last-change-time file-info)procedure

Returns the last-change-time field of the file-information record file-info.

For example:

 
> (file-info-last-change-time (file-info "/dev/tty"))
#<time #2>
(file-info-attributes file-info)procedure

Returns the attributes field of the file-information record file-info.

For example:

 
> (file-info-attributes (file-info "/dev/tty"))
128
(file-info-creation-time file-info)procedure

Returns the creation-time field of the file-information record file-info.

For example:

 
> (file-info-creation-time (file-info "/dev/tty"))
#<time #2>
(file-type path)procedure
(file-device path)procedure
(file-inode path)procedure
(file-mode path)procedure
(file-number-of-links path)procedure
(file-owner path)procedure
(file-group path)procedure
(file-size path)procedure
(file-last-access-time path)procedure
(file-last-modification-time path)procedure
(file-last-change-time path)procedure
(file-attributes path)procedure
(file-creation-time path)procedure

These procedures combine a call to the file-info procedure and a call to a file-information record field accessor. For instance (file-type path) is equivalent to (file-info-type (file-info path)).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.9 Group information

(group-info group-name-or-id)procedure

This procedure accesses the group database to get information about the group identified by group-name-or-id, which is the group’s symbolic name (string) or the group’s GID (exact integer). A group-information record is returned that contains the group’s symbolic name, the group’s id (GID), and the group’s members (list of symbolic user names).

For example:

 
> (group-info "staff")
#<group-info #2 name: "staff" gid: 20 members: ("root")>
> (group-info 29)
#<group-info #3
   name: "certusers"
   gid: 29
   members: ("root" "jabber" "postfix" "cyrusimap")>
> (group-info 5000)
*** ERROR IN (console)@3.1 -- Resource temporarily unavailable
(group-info 5000)
(group-info? obj)procedure

This procedure returns #t when obj is a group-information record and #f otherwise.

For example:

 
> (group-info? (group-info "daemon"))
#t
> (group-info? 123)
#f
(group-info-name group-info)procedure

Returns the symbolic name field of the group-information record group-info.

For example:

 
> (group-info-name (group-info 29))
"certusers"
(group-info-gid group-info)procedure

Returns the group id field of the group-information record group-info.

For example:

 
> (group-info-gid (group-info "staff"))
20
(group-info-members group-info)procedure

Returns the members field of the group-information record group-info.

For example:

 
> (group-info-members (group-info "staff"))
("root")

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.10 User information

(user-name)procedure

This procedure returns the user’s name as a string.

For example:

 
> (user-name)
"feeley"
(user-info user-name-or-id)procedure

This procedure accesses the user database to get information about the user identified by user-name-or-id, which is the user’s symbolic name (string) or the user’s UID (exact integer). A user-information record is returned that contains the user’s symbolic name, the user’s id (UID), the user’s group id (GID), the path to the user’s home directory, and the user’s login shell.

For example:

 
> (user-info "feeley")
#<user-info #2
   name: "feeley"
   uid: 506
   gid: 506
   home: "/Users/feeley"
   shell: "/bin/bash">
> (user-info 0)
#<user-info #3 name: "root" uid: 0 gid: 0 home: "/var/root" shell: "/bin/sh">
> (user-info 5000)
*** ERROR IN (console)@3.1 -- Resource temporarily unavailable
(user-info 5000)
(user-info? obj)procedure

This procedure returns #t when obj is a user-information record and #f otherwise.

For example:

 
> (user-info? (user-info "feeley"))
#t
> (user-info? 123)
#f
(user-info-name user-info)procedure

Returns the symbolic name field of the user-information record user-info.

For example:

 
> (user-info-name (user-info 0))
"root"
(user-info-uid user-info)procedure

Returns the user id field of the user-information record user-info.

For example:

 
> (user-info-uid (user-info "feeley"))
506
(user-info-gid user-info)procedure

Returns the group id field of the user-information record user-info.

For example:

 
> (user-info-gid (user-info "feeley"))
506
(user-info-home user-info)procedure

Returns the home directory field of the user-information record user-info.

For example:

 
> (user-info-home (user-info 0))
"/var/root"
(user-info-shell user-info)procedure

Returns the shell field of the user-information record user-info.

For example:

 
> (user-info-shell (user-info 0))
"/bin/sh"

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.11 Host information

(host-name)procedure

This procedure returns the machine’s host name as a string.

For example:

 
> (host-name)
"mega.iro.umontreal.ca"
(host-info host-name)procedure

This procedure accesses the internet host database to get information about the machine whose name is denoted by the string host-name. A host-information record is returned that contains the official name of the machine, a list of aliases (alternative names), and a non-empty list of IP addresses for this machine. An exception is raised when host-name does not appear in the database.

For example:

 
> (host-info "www.google.com")
#<host-info #2
   name: "www.l.google.com"
   aliases: ("www.google.com")
   addresses: (#u8(66 249 85 99) #u8(66 249 85 104))>
> (host-info "unknown.domain")
*** ERROR IN (console)@2.1 -- Unknown host
(host-info "unknown.domain")
(host-info? obj)procedure

This procedure returns #t when obj is a host-information record and #f otherwise.

For example:

 
> (host-info? (host-info "www.google.com"))
#t
> (host-info? 123)
#f
(host-info-name host-info)procedure

Returns the official name field of the host-information record host-info.

For example:

 
> (host-info-name (host-info "www.google.com"))
"www.l.google.com"
(host-info-aliases host-info)procedure

Returns the aliases field of the host-information record host-info. This field is a possibly empty list of strings.

For example:

 
> (host-info-aliases (host-info "www.google.com"))
("www.google.com")
(host-info-addresses host-info)procedure

Returns the addresses field of the host-information record host-info. This field is a non-empty list of u8vectors denoting IP addresses.

For example:

 
> (host-info-addresses (host-info "www.google.com"))
(#u8(66 249 85 99) #u8(66 249 85 104))
(address-infos [host: host] [service: service] [family: family] [socket-type: socket-type] [protocol: protocol])procedure

This procedure is an interface to the getaddrinfo system call. It accesses the internet host database to get information about the machine whose name is denoted by the string host and service is denoted by the string service and network address family is family (INET or INET6) and network socket-type is socket-type (STREAM or DGRAM or RAW) and network protocol is socket-type (TCP or UDP). A list of address-information records is returned.

For example:

 
> (address-infos host: "ftp.at.debian.org")
(#<address-info #2
    family: INET6
    socket-type: DGRAM
    protocol: UDP
    socket-info:
     #<socket-info #3
        family: INET6
        port-number: 0
        address: #u16(8193 2136 2 1 0 0 0 16)>>
 #<address-info #4
    family: INET6
    socket-type: STREAM
    protocol: TCP
    socket-info:
     #<socket-info #5
        family: INET6
        port-number: 0
        address: #u16(8193 2136 2 1 0 0 0 16)>>
 #<address-info #6
    family: INET
    socket-type: DGRAM
    protocol: UDP
    socket-info:
     #<socket-info #7
        family: INET
        port-number: 0
        address: #u8(213 129 232 18)>>
 #<address-info #8
    family: INET
    socket-type: STREAM
    protocol: TCP
    socket-info:
     #<socket-info #9
        family: INET
        port-number: 0
        address: #u8(213 129 232 18)>>)
> (address-infos host: "ftp.at.debian.org"
                 family: 'INET
                 protocol: 'TCP)
(#<address-info #10
    family: INET
    socket-type: STREAM
    protocol: TCP
    socket-info:
     #<socket-info #11
        family: INET
        port-number: 0
        address: #u8(213 129 232 18)>>)
> (address-infos host: "unknown.domain")
*** ERROR IN (console)@5.1 -- nodename nor servname provided, or not known
(address-infos host: "unknown.domain")
(address-info? obj)procedure

This procedure returns #t when obj is an address-information record and #f otherwise.

For example:

 
> (map address-info?
       (address-infos host: "ftp.at.debian.org"))
(#t #t #t #t)
> (address-info? 123)
#f
(address-info-family address-info)procedure

Returns the family field of the address-information record address-info.

For example:

 
> (map address-info-family
       (address-infos host: "ftp.at.debian.org"))
(INET6 INET6 INET INET)
(address-info-socket-type address-info)procedure

Returns the socket-type field of the address-information record address-info.

For example:

 
> (map address-info-socket-type
       (address-infos host: "ftp.at.debian.org"))
(DGRAM STREAM DGRAM STREAM)
(address-info-protocol address-info)procedure

Returns the protocol field of the address-information record address-info.

For example:

 
> (map address-info-protocol
       (address-infos host: "ftp.at.debian.org"))
(UDP TCP UDP TCP)
(address-info-socket-info address-info)procedure

Returns the socket-info field of the address-information record address-info.

For example:

 
> (map address-info-socket-info
       (address-infos host: "ftp.at.debian.org"))
(#<socket-info #2
    family: INET6
    port-number: 0
    address: #u16(8193 2136 2 1 0 0 0 16)>
 #<socket-info #3
    family: INET6
    port-number: 0
    address: #u16(8193 2136 2 1 0 0 0 16)>
 #<socket-info #4
    family: INET
    port-number: 0
    address: #u8(213 129 232 18)>
 #<socket-info #5
    family: INET
    port-number: 0
    address: #u8(213 129 232 18)>)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.12 Service information

(service-info service-name-or-id)procedure

This procedure accesses the service database to get information about the service identified by service-name-or-id, which is the service’s symbolic name (string) or the service’s port number (exact integer). A service-information record is returned that contains the service’s symbolic name, a list of aliases (alternative names), the port number (exact integer), and the protocol name (string). An exception is raised when service-name-or-id does not appear in the database.

For example:

 
> (service-info "http")
#<service-info #2
   name: "http"
   aliases: ("www" "www-http")
   port-number: 80
   protocol: "udp">
> (service-info 80)
#<service-info #3
   name: "http"
   aliases: ("www" "www-http")
   port-number: 80
   protocol: "udp">
(service-info? obj)procedure

This procedure returns #t when obj is a service-information record and #f otherwise.

For example:

 
> (service-info? (service-info "http"))
#t
> (service-info? 123)
#f
(service-info-name service-info)procedure

Returns the symbolic name field of the service-information record service-info.

For example:

 
> (service-info-name (service-info 80))
"http"
(service-info-aliases service-info)procedure

Returns the aliases field of the service-information record service-info. This field is a possibly empty list of strings.

For example:

 
> (service-info-aliases (service-info "http"))
("www" "www-http")
(service-info-port-number service-info)procedure

Returns the service port number field of the service-information record service-info.

For example:

 
> (service-info-port-number (service-info "http"))
80
(service-info-protocol service-info)procedure

Returns the service protocol name field of the service-information record service-info.

For example:

 
> (service-info-protocol (service-info "http"))
"udp"

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.13 Protocol information

(protocol-info protocol-name-or-id)procedure

This procedure accesses the protocol database to get information about the protocol identified by protocol-name-or-id, which is the protocol’s symbolic name (string) or the protocol’s number (exact integer). A protocol-information record is returned that contains the protocol’s symbolic name, a list of aliases (alternative names), and the protocol number (32 bit unsigned exact integer). An exception is raised when protocol-name-or-id does not appear in the database.

For example:

 
> (protocol-info "tcp")
#<protocol-info #2 name: "tcp" aliases: ("TCP") number: 6>
> (protocol-info 6)
#<protocol-info #2 name: "tcp" aliases: ("TCP") number: 6>
(protocol-info? obj)procedure

This procedure returns #t when obj is a protocol-information record and #f otherwise.

For example:

 
> (protocol-info? (protocol-info "tcp"))
#t
> (protocol-info? 123)
#f
(protocol-info-name protocol-info)procedure

Returns the symbolic name field of the protocol-information record protocol-info.

For example:

 
> (protocol-info-name (protocol-info 6))
"tcp"
(protocol-info-aliases protocol-info)procedure

Returns the aliases field of the protocol-information record protocol-info. This field is a possibly empty list of strings.

For example:

 
> (protocol-info-aliases (protocol-info "tcp"))
("TCP")
(protocol-info-number protocol-info)procedure

Returns the protocol number field of the protocol-information record protocol-info.

For example:

 
> (protocol-info-number (protocol-info "tcp"))
6

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

16.14 Network information

(network-info network-name-or-id)procedure

This procedure accesses the network database to get information about the network identified by network-name-or-id, which is the network’s symbolic name (string) or the network’s number (exact integer). A network-information record is returned that contains the network’s symbolic name, a list of aliases (alternative names), and the network number (32 bit unsigned exact integer). An exception is raised when network-name-or-id does not appear in the database.

For example:

 
> (network-info "loopback")
#<network-info #2
   name: "loopback"
   aliases: ("loopback-net")
   number: 127>
> (network-info 127)
#<network-info #3
   name: "loopback"
   aliases: ("loopback-net")
   number: 127>
(network-info? obj)procedure

This procedure returns #t when obj is a network-information record and #f otherwise.

For example:

 
> (network-info? (network-info "loopback"))
#t
> (network-info? 123)
#f
(network-info-name network-info)procedure

Returns the symbolic name field of the network-information record network-info.

For example:

 
> (network-info-name (network-info 127))
"loopback"
(network-info-aliases network-info)procedure

Returns the aliases field of the network-information record network-info. This field is a possibly empty list of strings.

For example:

 
> (network-info-aliases (network-info "loopback"))
("loopback-net")
(network-info-number network-info)procedure

Returns the network number field of the network-information record network-info.

For example:

 
> (network-info-number (network-info "loopback"))
127

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17. I/O and ports


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.1 Unidirectional and bidirectional ports

Unidirectional ports allow communication between a producer of information and a consumer. An input-port’s producer is typically a resource managed by the operating system (such as a file, a process or a network connection) and the consumer is the Scheme program. The roles are reversed for an output-port.

Associated with each port are settings that affect I/O operations on that port (encoding of characters to bytes, end-of-line encoding, type of buffering, etc). Port settings are specified when the port is created. Some port settings can be changed after a port is created.

Bidirectional ports, also called input-output-ports, allow communication in both directions. They are best viewed as an object that groups two separate unidirectional ports (one in each direction). Each direction has its own port settings and can be closed independently from the other direction.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.2 Port classes

The four classes of ports listed below form an inheritance hierarchy. Operations possible for a certain class of port are also possible for the subclasses. Only device-ports are connected to a device managed by the operating system. For instance it is possible to create ports that behave as a FIFO where the Scheme program is both the producer and consumer of information (possibly one thread is the producer and another thread is the consumer).

  1. An object-port (or simply a port) provides operations to read and write Scheme data (i.e. any Scheme object) to/from the port. It also provides operations to force output to occur, to change the way threads block on the port, and to close the port. Note that the class of objects for which write/read invariance is guaranteed depends on the particular class of port.
  2. A character-port provides all the operations of an object-port, and also operations to read and write individual characters to/from the port. When a Scheme object is written to a character-port, it is converted into the sequence of characters that corresponds to its external-representation. When reading a Scheme object, an inverse conversion occurs. Note that some Scheme objects do not have an external textual representation that can be read back.
  3. A byte-port provides all the operations of a character-port, and also operations to read and write individual bytes to/from the port. When a character is written to a byte-port, some encoding of that character into a sequence of bytes will occur (for example, #\newline will be encoded as the 2 bytes CR-LF when using ISO-8859-1 character encoding and cr-lf end-of-line encoding, and a non-ASCII character will generate more than 1 byte when using UTF-8 character encoding). When reading a character, a similar decoding occurs.
  4. A device-port provides all the operations of a byte-port, and also operations to control the operating system managed device (file, network connection, terminal, etc) that is connected to the port.

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.3 Port settings

Some port settings are only valid for specific port classes whereas some others are valid for all ports. Port settings are specified when a port is created. The settings that are not specified will default to some reasonable values. Keyword objects are used to name the settings to be set. As a simple example, a device-port connected to the file "foo" can be created using the call

 
(open-input-file "foo")

This will use default settings for the character encoding, buffering, etc. If the UTF-8 character encoding is desired, then the port could be opened using the call

 
(open-input-file (list path: "foo" char-encoding: 'UTF-8))

Here the argument of the procedure open-input-file has been replaced by a port settings list which specifies the value of each port setting that should not be set to the default value. Note that some port settings have no useful default and it is therefore required to specify a value for them, such as the path: in the case of the file opening procedures. All port creation procedures (i.e. named open-...) take a single argument that can either be a port settings list or a value of a type that depends on the kind of port being created (a path string for files, an IP port number for socket servers, etc).


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.4 Object-ports


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.4.1 Object-port settings

The following is a list of port settings that are valid for all types of ports.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.4.2 Object-port operations

(input-port? obj)procedure
(output-port? obj)procedure
(port? obj)procedure

The procedure input-port? returns #t when obj is a unidirectional input-port or a bidirectional port and #f otherwise.

The procedure output-port? returns #t when obj is a unidirectional output-port or a bidirectional port and #f otherwise.

The procedure port? returns #t when obj is a port (either unidirectional or bidirectional) and #f otherwise.

For example:

 
> (input-port? (current-input-port))
#t
> (call-with-input-string "some text" output-port?)
#f
> (port? (current-output-port))
#t
(read [port])procedure

This procedure reads and returns the next Scheme datum from the input-port port. The end-of-file object is returned when the end of the stream is reached. If it is not specified, port defaults to the current input-port.

For example:

 
> (call-with-input-string "some text" read)
some
> (call-with-input-string "" read)
#!eof
(read-all [port [reader]])procedure

This procedure repeatedly calls the procedure reader with port as the sole argument and accumulates a list of each value returned up to the end-of-file object. The procedure read-all returns the accumulated list without the end-of-file object. If it is not specified, port defaults to the current input-port. If it is not specified, reader defaults to the procedure read.

For example:

 
> (call-with-input-string "3,2,1\ngo!" read-all)
(3 ,2 ,1 go!)
> (call-with-input-string "3,2,1\ngo!"
                          (lambda (p) (read-all p read-char)))
(#\3 #\, #\2 #\, #\1 #\newline #\g #\o #\!)
> (call-with-input-string "3,2,1\ngo!"
                          (lambda (p) (read-all p read-line)))
("3,2,1" "go!")
(write obj [port])procedure

This procedure writes the Scheme datum obj to the output-port port and the value returned is unspecified. If it is not specified, port defaults to the current output-port.

For example:

 
> (write (list 'compare (list 'quote '@x) 'and (list 'unquote '@x))) 
(compare '@x and , @x)> 
(newline [port])procedure

This procedure writes an “object separator” to the output-port port and the value returned is unspecified. The separator ensures that the next Scheme datum written with the write procedure will not be confused with the latest datum that was written. On character-ports this is done by writing the character #\newline. On ports where successive objects are implicitly distinct (such as “vector ports”) this procedure does nothing.

Regardless of the class of a port p and assuming that the external textual representation of the object x is readable, the expression (begin (write x p) (newline p)) will write to p a representation of x that can be read back with the procedure read. If it is not specified, port defaults to the current output-port.

For example:

 
> (begin (write 123) (newline) (write 456) (newline))
123
456
(force-output [port [level]])procedure

The procedure force-output causes the data that was written to the output-port port to be moved closer to its destination according to level, an exact integer in the range 0 to 2. If port is not specified, the current output-port is used. If level is not specified, it defaults to 0. Values of level above 0 are equivalent to level = 0 except for device ports as explained below.

When level is 0, the output buffers of port which are managed in the Scheme process are drained (i.e. the output operation that was delayed due to buffering is actually performed). In the case of a device port the data is passed to the operating system and it becomes its responsibility to transmit the data to the device. The operating system may implement its own buffering approach which delays the transmission of the data to the device.

When level is 1, in addition to the operations for level = 0 and if the operating system supports the functionality, the operating system is requested to transmit the data to the device. On UNIX this corresponds to a fsync system call.

When level is 2, in addition to the operations for level = 1 and if the operating system supports the functionality, the operating system is requested to wait until the device reports that the data was saved by the device (e.g. actually written to disk in the case of a file). This operation can take a long time on some operating systems. On Mac OS X this corresponds to a fcntl system call with operation F_FULLFSYNC.

For example:

 
> (define p (open-tcp-client "www.iro.umontreal.ca:80"))
> (display "GET /\n" p)
> (force-output p)
> (read-line p)
"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\""
(close-input-port port)procedure
(close-output-port port)procedure
(close-port port)procedure

The port argument of these procedures must be a unidirectional or a bidirectional port. For all three procedures the value returned is unspecified.

The procedure close-input-port closes the input-port side of port, which must not be a unidirectional output-port.

The procedure close-output-port closes the output-port side of port, which must not be a unidirectional input-port. The ouput buffers are drained before port is closed.

The procedure close-port closes all sides of the port. Unless port is a unidirectional input-port, the output buffers are drained before port is closed.

For example:

 
> (define p (open-tcp-client "www.iro.umontreal.ca:80"))
> (display "GET /\n" p)
> (close-output-port p)
> (read-line p)
"<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.01 Transitional//EN\""
(input-port-timeout-set! port timeout [thunk])procedure
(output-port-timeout-set! port timeout [thunk])procedure

When a thread tries to perform an I/O operation on a port, the requested operation may not be immediately possible and the thread must wait. For example, the thread may be trying to read a line of text from the console and the user has not typed anything yet, or the thread may be trying to write to a network connection faster than the network can handle. In such situations the thread normally blocks until the operation becomes possible.

It is sometimes necessary to guarantee that the thread will not block too long. For this purpose, to each input-port and output-port is attached a timeout and timeout-thunk. The timeout indicates the point in time beyond which the thread should stop waiting on an input and output operation respectively. When the timeout is reached, the thread calls the port’s timeout-thunk. If the timeout-thunk returns #f the thread abandons trying to perform the operation (in the case of an input operation an end-of-file is read and in the case of an output operation an exception is raised). Otherwise, the thread will block again waiting for the operation to become possible (note that if the port’s timeout has not changed the thread will immediately call the timeout-thunk again).

The procedure input-port-timeout-set! sets the timeout of the input-port port to timeout and the timeout-thunk to thunk. The procedure output-port-timeout-set! sets the timeout of the output-port port to timeout and the timeout-thunk to thunk. If it is not specified, the thunk defaults to a thunk that returns #f. The timeout is either a time object indicating an absolute point in time, or it is a real number which indicates the number of seconds relative to the moment the procedure is called. For both procedures the value returned is unspecified.

When a port is created the timeout is set to infinity (+inf.0). This causes the thread to wait as long as needed for the operation to become possible. Setting the timeout to a point in the past (-inf.0) will cause the thread to attempt the I/O operation and never block (i.e. the timeout-thunk is called if the operation is not immediately possible).

The following example shows how to cause the REPL to terminate when the user does not enter an expression within the next 60 seconds.

 
> (input-port-timeout-set! (repl-input-port) 60)
> 
*** EOF again to exit

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.5 Character-ports


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.5.1 Character-port settings

The following is a list of port settings that are valid for character-ports.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.5.2 Character-port operations

(input-port-line port)procedure
(input-port-column port)procedure
(output-port-line port)procedure
(output-port-column port)procedure

The current character location of a character input-port is the location of the next character to read. The current character location of a character output-port is the location of the next character to write. Location is denoted by a line number (the first line is line 1) and a column number, that is the location on the current line (the first column is column 1). The procedures input-port-line and input-port-column return the line location and the column location respectively of the character input-port port. The procedures output-port-line and output-port-column return the line location and the column location respectively of the character output-port port.

For example:

 
> (call-with-output-string
    '()
    (lambda (p)
      (display "abc\n123def" p)
      (write (list (output-port-line p) (output-port-column p))
             p)))
"abc\n123def(2 7)"
(output-port-width port)procedure

This procedure returns the width, in characters, of the character output-port port. The value returned is the port’s output-width setting.

For example:

 
> (output-port-width (repl-output-port))
80
(read-char [port])procedure

This procedure reads the character input-port port and returns the character at the current character location and advances the current character location to the next character, unless the port is already at end-of-file in which case read-char returns the end-of-file object. If it is not specified, port defaults to the current input-port.

For example:

 
> (call-with-input-string
    "some text"
    (lambda (p)
      (let ((a (read-char p))) (list a (read-char p)))))
(#\s #\o)
> (call-with-input-string "" read-char)
#!eof
(peek-char [port])procedure

This procedure returns the same result as read-char but it does not advance the current character location of the input-port port. If it is not specified, port defaults to the current input-port.

For example:

 
> (call-with-input-string
    "some text"
    (lambda (p)
      (let ((a (peek-char p))) (list a (read-char p)))))
(#\s #\s)
> (call-with-input-string "" peek-char)
#!eof
(write-char char [port])procedure

This procedure writes the character char to the character output-port port and advances the current character location of that output-port. The value returned is unspecified. If it is not specified, port defaults to the current output-port.

For example:

 
> (write-char #\=)
=> 
(read-line [port [separator [include-separator? [max-length]]]])procedure

This procedure reads characters from the character input-port port until a specific separator or the end-of-file is encountered and returns a string containing the sequence of characters read. If it is specified, max-length must be a nonnegative exact integer and it places an upper limit on the number of characters that are read.

The separator is included at the end of the string only if it was the last character read and include-separator? is not #f. The separator must be a character or #f (in which case all the characters until the end-of-file are read). If it is not specified, port defaults to the current input-port. If it is not specified, separator defaults to #\newline. If it is not specified, include-separator? defaults to #f.

For example:

 
> (define (split sep)
    (lambda (str)
      (call-with-input-string
        str
        (lambda (p)
          (read-all p (lambda (p) (read-line p sep)))))))
> ((split #\,) "a,b,c")
("a" "b" "c")
> (map (split #\,)
       (call-with-input-string "1,2,3\n4,5"
                               (lambda (p) (read-all p read-line))))
(("1" "2" "3") ("4" "5"))
> (read-line (current-input-port) #\newline #f 2)1234
"12"
> 34
(read-substring string start end [port [need]])procedure
(write-substring string start end [port])procedure

These procedures support bulk character I/O. The part of the string string starting at index start and ending just before index end is used as a character buffer that will be the target of read-substring or the source of the write-substring. The read-substring also accepts a need parameter which must be a nonnegative fixnum. Up to end-start characters will be transferred. The number of characters transferred, possibly zero, is returned by these procedures. Fewer characters will be read by read-substring if an end-of-file is read, or a timeout occurs before all the requested characters are transferred and the timeout thunk returns #f (see the procedure input-port-timeout-set!), or need is specified and at least that many characters have been read (in other words the procedure does not block for more characters but may transfer more characters if they are immediately available). Fewer characters will be written by write-substring if a timeout occurs before all the requested characters are transferred and the timeout thunk returns #f (see the procedure output-port-timeout-set!). If it is not specified, port defaults to the current input-port and current output-port respectively.

For example:

 
> (define s (make-string 10 #\x))
> (read-substring s 2 5)123456789
3
> 456789
> s
"xx123xxxxx"
> (read-substring s 2 10 (current-input-port) 3)abcd
5
> s
"xxabcd\nxxx"
(input-port-readtable port)procedure
(output-port-readtable port)procedure

These procedures return the readtable attached to the character-port port. The port parameter of input-port-readtable must be an input-port. The port parameter of output-port-readtable must be an output-port.

(input-port-readtable-set! port readtable)procedure
(output-port-readtable-set! port readtable)procedure

These procedures change the readtable attached to the character-port port to the readtable readtable. The port parameter of input-port-readtable-set! must be an input-port. The port parameter of output-port-readtable-set! must be an output-port. The value returned is unspecified.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.6 Byte-ports


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.6.1 Byte-port settings

The following is a list of port settings that are valid for byte-ports.


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.6.2 Byte-port operations

(read-u8 [port])procedure

This procedure reads the byte input-port port and returns the byte at the current byte location and advances the current byte location to the next byte, unless the port is already at end-of-file in which case read-u8 returns the end-of-file object. If it is not specified, port defaults to the current input-port.

This procedure must be called when the port’s input character buffer is empty otherwise the character-stream and byte-stream may be out of sync due to buffering. The input character buffer is used for bulk decoding of encoded characters (i.e. to translate the byte-stream into a character-stream). The input character buffer is initially empty. It is only when characters are read that it is filled with characters obtained by decoding the byte-stream.

One way to ensure that the port’s input character buffer is empty is to call read-u8 strictly before any use of the port in a character input operation (i.e. a call to the procedures read, read-char, peek-char, etc). Alternatively input-port-characters-buffered can be used to get the number of characters in the port’s input character buffer, and to empty the buffer with calls to read-char or read-substring.

For example:

 
> (call-with-input-u8vector
    '#u8(11 22 33 44)
    (lambda (p)
      (let ((a (read-u8 p))) (list a (read-u8 p)))))
(11 22)
> (call-with-input-u8vector '#u8() read-u8)
#!eof
(write-u8 n [port])procedure

This procedure writes the byte n to the byte output-port port and advances the current byte location of that output-port. The value returned is unspecified. If it is not specified, port defaults to the current output-port.

For example:

 
> (call-with-output-u8vector '() (lambda (p) (write-u8 33 p)))
#u8(33)
(read-subu8vector u8vector start end [port [need]])procedure
(write-subu8vector u8vector start end [port])procedure

These procedures support bulk byte I/O. The part of the u8vector u8vector starting at index start and ending just before index end is used as a byte buffer that will be the target of read-subu8vector or the source of the write-subu8vector. The read-subu8vector also accepts a need parameter which must be a nonnegative fixnum. Up to end-start bytes will be transferred. The number of bytes transferred, possibly zero, is returned by these procedures. Fewer bytes will be read by read-subu8vector if an end-of-file is read, or a timeout occurs before all the requested bytes are transferred and the timeout thunk returns #f (see the procedure input-port-timeout-set!), or need is specified and at least that many bytes have been read (in other words the procedure does not block for more bytes but may transfer more bytes if they are immediately available). Fewer bytes will be written by write-subu8vector if a timeout occurs before all the requested bytes are transferred and the timeout thunk returns #f (see the procedure output-port-timeout-set!). If it is not specified, port defaults to the current input-port and current output-port respectively.

The procedure read-subu8vector must be called before any use of the port in a character input operation (i.e. a call to the procedures read, read-char, peek-char, etc) because otherwise the character-stream and byte-stream may be out of sync due to the port buffering.

For example:

 
> (define v (make-u8vector 10))
> (read-subu8vector v 2 5)123456789
3
> 456789
> v
#u8(0 0 49 50 51 0 0 0 0 0)
> (read-subu8vector v 2 10 (current-input-port) 3)abcd
5
> v
#u8(0 0 97 98 99 100 10 0 0 0)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.7 Device-ports


[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.7.1 Filesystem devices

(open-file path-or-settings)procedure
(open-input-file path-or-settings)procedure
(open-output-file path-or-settings)procedure
(call-with-input-file path-or-settings proc)procedure
(call-with-output-file path-or-settings proc)procedure
(with-input-from-file path-or-settings thunk)procedure
(with-output-to-file path-or-settings thunk)procedure

All of these procedures create a port to interface to a byte-stream device (such as a file, console, serial port, named pipe, etc) whose name is given by a path of the filesystem. The direction: setting will default to the value input for the procedures open-input-file, call-with-input-file and with-input-from-file, to the value output for the procedures open-output-file, call-with-output-file and with-output-to-file, and to the value input-output for the procedure open-file.

The procedures open-file, open-input-file and open-output-file return the port that is created. The procedures call-with-input-file and call-with-output-file call the procedure proc with the port as single argument, and then return the value(s) of this call after closing the port. The procedures with-input-from-file and with-output-to-file dynamically bind the current input-port and current output-port respectively to the port created for the duration of a call to the procedure thunk with no argument. The value(s) of the call to thunk are returned after closing the port.

The first argument of these procedures is either a string denoting a filesystem path or a list of port settings which must contain a path: setting. Here are the settings allowed in addition to the generic settings of byte-ports:

For example:

 
> (with-output-to-file
    (list path: "nofile"
          create: #f)
    (lambda ()
      (display "hello world!\n")))
*** ERROR IN (console)@1.1 -- No such file or directory
(with-output-to-file '(path: "nofile" create: #f) '#<procedure #2>)
(input-port-byte-position port [position [whence]])procedure
(output-port-byte-position port [position [whence]])procedure

When called with a single argument these procedures return the byte position where the next I/O operation would take place in the file attached to the given port (relative to the beginning of the file). When called with two or three arguments, the byte position for subsequent I/O operations on the given port is changed to position, which must be an exact integer. When whence is omitted or is 0, the position is relative to the beginning of the file. When whence is 1, the position is relative to the current byte position of the file. When whence is 2, the position is relative to the end of the file. The return value is the new byte position. On most operating systems the byte position for reading and writing of a given bidirectional port are the same.

When input-port-byte-position is called to change the byte position of an input-port, all input buffers will be flushed so that the next byte read will be the one at the given position.

When output-port-byte-position is called to change the byte position of an output-port, there is an implicit call to force-output before the position is changed.

For example:

 
> (define p  ; p is an input-output-port
    (open-file '(path: "test" char-encoding: ISO-8859-1 create: maybe)))
> (list (input-port-byte-position p) (output-port-byte-position p))
(0 0)
> (display "abcdefghij\n" p)
> (list (input-port-byte-position p) (output-port-byte-position p))
(0 0)
> (force-output p)
> (list (input-port-byte-position p) (output-port-byte-position p))
(11 11)
> (input-port-byte-position p 2)
2
> (list (input-port-byte-position p) (output-port-byte-position p))
(2 2)
> (peek-char p)
#\c
> (list (input-port-byte-position p) (output-port-byte-position p))
(11 11)
> (output-port-byte-position p -7 2)
4
> (list (input-port-byte-position p) (output-port-byte-position p))
(4 4)
> (write-char #\! p)
> (list (input-port-byte-position p) (output-port-byte-position p))
(4 4)
> (force-output p)
> (list (input-port-byte-position p) (output-port-byte-position p))
(5 5)
> (input-port-byte-position p 1)
1
> (read p)
bcd!fghij

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.7.2 Process devices

(open-process path-or-settings)procedure
(open-input-process path-or-settings)procedure
(open-output-process path-or-settings)procedure
(call-with-input-process path-or-settings proc)procedure
(call-with-output-process path-or-settings proc)procedure
(with-input-from-process path-or-settings thunk)procedure
(with-output-to-process path-or-settings thunk)procedure

All of these procedures start a new operating system process and create a bidirectional port which allows communication with that process on its standard input and standard output. The direction: setting will default to the value input for the procedures open-input-process, call-with-input-process and with-input-from-process, to the value output for the procedures open-output-process, call-with-output-process and with-output-to-process, and to the value input-output for the procedure open-process. If the direction: setting is input, the output-port side is closed. If the direction: setting is output, the input-port side is closed.

The procedures open-process, open-input-process and open-output-process return the port that is created. The procedures call-with-input-process and call-with-output-process call the procedure proc with the port as single argument, and then return the value(s) of this call after closing the port and waiting for the process to terminate. The procedures with-input-from-process and with-output-to-process dynamically bind the current input-port and current output-port respectively to the port created for the duration of a call to the procedure thunk with no argument. The value(s) of the call to thunk are returned after closing the port and waiting for the process to terminate.

The first argument of this procedure is either a string denoting a filesystem path of an executable program or a list of port settings which must contain a path: setting. Here are the settings allowed in addition to the generic settings of byte-ports:

For example:

 
> (with-input-from-process "date" read-line)
"Sun Jun 14 15:06:41 EDT 2009"
> (define p (open-process (list path: "ls"
                                arguments: '("../examples"))))
> (read-line p)
"README"
> (read-line p)
"Xlib-simple"
> (close-port p)
> (define p (open-process "/usr/bin/dc"))
> (display "2 100 ^ p\n" p)
> (force-output p)
> (read-line p)
"1267650600228229401496703205376"
(process-pid process-port)procedure

This procedure returns the PID (Process Identifier) of the process of process-port. The PID is a small exact integer.

For example:

 
> (let ((p (open-process "sort")))
    (process-pid p))
318
(process-status process-port [timeout [timeout-val]])procedure

This procedure causes the current thread to wait until the process of process-port terminates (normally or not) or until the timeout is reached if timeout is supplied. If the timeout is reached, process-status returns timeout-val if it is supplied, otherwise an unterminated-process-exception object is raised. The procedure returns the process exit status as encoded by the operating system. Typically, if the process exited normally the return value is the process exit status multiplied by 256.

For example:

 
> (let ((p (open-process "sort")))
    (for-each (lambda (x) (pretty-print x p))
              '(22 11 33))
    (close-output-port p)
    (let ((r (read-all p)))
      (close-input-port p)
      (list (process-status p) r)))
(0 (11 22 33))
(unterminated-process-exception? obj)procedure
(unterminated-process-exception-procedure exc)procedure
(unterminated-process-exception-arguments exc)procedure

Unterminated-process-exception objects are raised when a call to the process-status procedure reaches its timeout before the target process terminates and a timeout-value parameter is not specified. The parameter exc must be an unterminated-process-exception object.

The procedure unterminated-process-exception? returns #t when obj is an unterminated-process-exception object and #f otherwise.

The procedure unterminated-process-exception-procedure returns the procedure that raised exc.

The procedure unterminated-process-exception-arguments returns the list of arguments of the procedure that raised exc.

For example:

 
> (define (handler exc)
    (if (unterminated-process-exception? exc)
        (list (unterminated-process-exception-procedure exc)
              (unterminated-process-exception-arguments exc))
        'not-unterminated-process-exception))
> (with-exception-catcher
    handler
    (lambda ()
      (let ((p (open-process "sort")))
        (process-status p 1))))
(#<procedure #2 process-status> (#<input-output-port #3 (process "sort")>))

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.7.3 Network devices

(open-tcp-client port-number-or-address-or-settings)procedure

This procedure opens a network connection to a socket server and returns a tcp-client-port (a subtype of device-port) that represents this connection and allows communication with that server. The default value of the direction: setting is input-output, i.e. the Scheme program can send information to the server and receive information from the server. The sending direction can be “shutdown” using the close-output-port procedure and the receiving direction can be “shutdown” using the close-input-port procedure. The close-port procedure closes both directions of the connection.

The parameter of this procedure is an IP port number (16-bit nonnegative exact integer), a string of the form "HOST:PORT" or a list of port settings. When the parameter is the number PORT it is handled as if it was the setting port-number: PORT. When the parameter is the string "HOST:PORT" it is handled as if it was the setting server-address: "HOST:PORT".

Here are the settings allowed in addition to the generic settings of byte-ports:

Below is an example of the client-side code that opens a connection to an HTTP server on port 8080 of the loopback interface (with IP address 127.0.0.1). For the server-side code see the example for the procedure open-tcp-server.

 
> (define p (open-tcp-client (list port-number: 8080
                                   eol-encoding: 'cr-lf)))
> p
#<input-output-port #2 (tcp-client #u8(127 0 0 1) 8080)>
> (display "GET /\n" p)
> (force-output p)
> (read-line p)
"<HTML>"
(open-tcp-server port-number-or-address-or-settings)procedure

This procedure sets up a socket to accept network connection requests from clients and returns a tcp-server-port from which network connections to clients are obtained. Tcp-server-ports are a direct subtype of object-ports (i.e. they are not character-ports) and are input-ports. Reading from a tcp-server-port with the read procedure will block until a network connection request is received from a client. The read procedure will then return a tcp-client-port (a subtype of device-port) that represents this connection and allows communication with that client. Closing a tcp-server-port with either the close-input-port or close-port procedures will cause the network subsystem to stop accepting connections on that socket.

The parameter of this procedure is an IP port number (16-bit nonnegative exact integer), a string of the form "INTF:PORT" or a list of port settings which must contain a port-number: setting. When the parameter is the number PORT it is handled as if it was the setting port-number: PORT. When the parameter is the string "INTF:PORT" it is handled as if it was the setting server-address: "INTF:PORT".

Below is a list of the settings allowed in addition to the settings keep-alive: and coalesce: allowed by the open-tcp-client procedure and the generic settings of byte-ports. The settings which are not listed below apply to the tcp-client-port that is returned by read when a connection is accepted and have the same meaning as if they were used in a call to the open-tcp-client procedure.

Below is an example of the server-side code that accepts connections on port 8080 of any network interface. For the client-side code see the example for the procedure open-tcp-client.

 
> (define s (open-tcp-server (list server-address: "*"
                                   port-number: 8080
                                   eol-encoding: 'cr-lf)))
> (define p (read s))  ; blocks until client connects
> p
#<input-output-port #2 (tcp-client 8080)>
> (read-line p)
"GET /"
> (display "<HTML>\n" p)
> (force-output p)
(tcp-service-register! port-number-or-address-or-settings thunk [thread-group])procedure
(tcp-service-unregister! port-number-or-address-or-settings)procedure

The procedure tcp-service-register! sets up a socket to accept network connection requests from clients and creates a “service” thread which processes the incoming connections. The parameter port-number-or-address-or-settings has the same meaning as for the procedure open-tcp-server.

For each connection established the service thread creates a “handler” thread which executes a call to the procedure thunk with no argument. The handler thread’s current input-port and current output-port are both set to the tcp-client-port created for the connection. There is no need for the thunk to close the tcp-client-port, as this is done by the handler thread when the thunk returns normally.

The procedure tcp-service-unregister! terminates the service thread which was registered by tcp-service-register! with the same network interface and port number (if a service thread is still registered). The procedure tcp-service-register! implicitly calls tcp-service-unregister! before registering the new service thread.

 
> (tcp-service-register!
   8000
   (lambda () (display "hello\n")))
> (define p (open-tcp-client 8000))
> (read-line p)
"hello"
> (tcp-service-unregister! 8000)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.8 Directory-ports

(open-directory path-or-settings)procedure

This procedure opens a directory of the filesystem for reading its entries and returns a directory-port from which the entries can be enumerated. Directory-ports are a direct subtype of object-ports (i.e. they are not character-ports) and are input-ports. Reading from a directory-port with the read procedure returns the next file name in the directory as a string. The end-of-file object is returned when all the file names have been enumerated. Another way to get the list of all files in a directory is the directory-files procedure which returns a list of the files in the directory. The advantage of using directory-ports is that it allows iterating over the files in a directory in constant space, which is interesting when the number of files in the directory is not known in advance and may be large. Note that the order in which the names are returned is operating-system dependent.

The parameter of this procedure is either a string denoting a filesystem path to a directory or a list of port settings which must contain a path: setting. Here are the settings allowed in addition to the generic settings of object-ports:

For example:

 
> (let ((p (open-directory (list path: "../examples"
                                 ignore-hidden: #f))))
    (let loop ()
      (let ((fn (read p)))
        (if (string? fn)
            (begin
              (pp (path-expand fn))
              (loop)))))
    (close-input-port p))
"/u/feeley/examples/."
"/u/feeley/examples/.."
"/u/feeley/examples/complex"
"/u/feeley/examples/README"
"/u/feeley/examples/simple"
> (define x (open-directory "../examples"))
> (read-all x)
("complex" "README" "simple")

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.9 Vector-ports

(open-vector [vector-or-settings])procedure
(open-input-vector [vector-or-settings])procedure
(open-output-vector [vector-or-settings])procedure
(call-with-input-vector vector-or-settings proc)procedure
(call-with-output-vector vector-or-settings proc)procedure
(with-input-from-vector vector-or-settings thunk)procedure
(with-output-to-vector vector-or-settings thunk)procedure

Vector-ports represent streams of Scheme objects. They are a direct subtype of object-ports (i.e. they are not character-ports). All of these procedures create vector-ports that are either unidirectional or bidirectional. The direction: setting will default to the value input for the procedures open-input-vector, call-with-input-vector and with-input-from-vector, to the value output for the procedures open-output-vector, call-with-output-vector and with-output-to-vector, and to the value input-output for the procedure open-vector. Bidirectional vector-ports behave like FIFOs: data written to the port is added to the end of the stream that is read. It is only when a bidirectional vector-port’s output-side is closed with a call to the close-output-port procedure that the stream’s end is known (when the stream’s end is reached, reading the port returns the end-of-file object).

The procedures open-vector, open-input-vector and open-output-vector return the port that is created. The procedures call-with-input-vector and call-with-output-vector create a vector port, call the procedure proc with the port as single argument and then close the port. The procedures with-input-from-vector and with-output-to-vector create a vector port, dynamically bind the current input-port and current output-port respectively to the port created for the duration of a call to the procedure thunk with no argument, and then close the port. The procedures call-with-input-vector and with-input-from-vector return the value returned by the procedures proc and thunk respectively. The procedures call-with-output-vector and with-output-to-vector return the vector accumulated in the port (see get-output-vector).

The first parameter of these procedures is either a vector of the elements used to initialize the stream or a list of port settings. If it is not specified, the parameter of the open-vector, open-input-vector, and open-output-vector procedures defaults to an empty list of port settings. Here are the settings allowed in addition to the generic settings of object-ports:

For example:

 
> (define p (open-vector))
> (write 1 p)
> (write 2 p)
> (write 3 p)
> (force-output p)
> (read p)
1
> (read p)
2
> (close-output-port p)
> (read p)
3
> (read p)
#!eof
> (with-output-to-vector '() (lambda () (write 1) (write 2)))
#(1 2)
(open-vector-pipe [vector-or-settings1 [vector-or-settings2]])procedure

The procedure open-vector-pipe creates two vector-ports and returns these two ports. The two ports are interrelated as follows: the first port’s output-side is connected to the second port’s input-side and the first port’s input-side is connected to the second port’s output-side. The value vector-or-settings1 is used to setup the first vector-port and vector-or-settings2 is used to setup the second vector-port. The same settings as for open-vector are allowed. The default direction: setting is input-output (i.e. a bidirectional port is created). If it is not specified vector-or-settings1 defaults to the empty list. If it is not specified vector-or-settings2 defaults to vector-or-settings1 but with the init: setting set to the empty vector and with the input and output settings exchanged (e.g. if the first port is an input-port then the second port is an output-port, if the first port’s input-side is non-buffered then the second port’s output-side is non-buffered).

For example:

 
> (define (server op)
    (receive (c s) (open-vector-pipe)  ; client-side and server-side ports
      (thread-start!
        (make-thread
          (lambda ()
            (let loop ()
              (let ((request (read s)))
                (if (not (eof-object? request))
                    (begin
                      (write (op request) s)
                      (newline s)
                      (force-output s)
                      (loop))))))))
      c))
> (define a (server (lambda (x) (expt 2 x))))
> (define b (server (lambda (x) (expt 10 x))))
> (write 100 a)
> (write 30 b)
> (read a)
1267650600228229401496703205376
> (read b)
1000000000000000000000000000000
(get-output-vector vector-port)procedure

The procedure get-output-vector takes an output vector-port or a bidirectional vector-port as parameter and removes all the objects currently on the output-side, returning them in a vector. The port remains open and subsequent output to the port and calls to the procedure get-output-vector are possible.

For example:

 
> (define p (open-vector '#(1 2 3)))
> (write 4 p)
> (get-output-vector p)
#(1 2 3 4)
> (write 5 p)
> (write 6 p)
> (get-output-vector p)
#(5 6)

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.10 String-ports

(open-string [string-or-settings])procedure
(open-input-string [string-or-settings])procedure
(open-output-string [string-or-settings])procedure
(call-with-input-string string-or-settings proc)procedure
(call-with-output-string string-or-settings proc)procedure
(with-input-from-string string-or-settings thunk)procedure
(with-output-to-string string-or-settings thunk)procedure
(open-string-pipe [string-or-settings1 [string-or-settings2]])procedure
(get-output-string string-port)procedure

String-ports represent streams of characters. They are a direct subtype of character-ports. These procedures are the string-port analog of the procedures specified in the vector-ports section. Note that these procedures are a superset of the procedures specified in the “Basic String Ports SRFI” (SRFI 6).

For example:

 
> (define p (open-string))
> (write 1 p)
> (write 2 p)
> (write 3 p)
> (force-output p)
> (read-char p)
#\1
> (read-char p)
#\2
> (close-output-port p)
> (read-char p)
#\3
> (read-char p)
#!eof
> (with-output-to-string '() (lambda () (write 1) (write 2)))
"12"
(object->string obj [n])procedure

This procedure converts the object obj to its external representation and returns it in a string. The parameter n specifies the maximal width of the resulting string. If the external representation is wider than n, the resulting string will be truncated to n characters and the last 3 characters will be set to periods. Note that the current readtable is used.

For example:

 
> (object->string (expt 2 100))
"1267650600228229401496703205376"
> (object->string (expt 2 100) 30)
"126765060022822940149670320..."
> (object->string (cons car cdr))
"(#<procedure #2 car> . #<procedure #3 cdr>)"

[ < ] [ > ]   [ << ] [ Up ] [ >> ]         [Top] [Contents] [Index] [ ? ]

17.11 U8vector-ports

(open-u8vector [u8vector-or-settings])procedure
(open-input-u8vector [u8vector-or-settings])procedure
(open-output-u8vector [u8vector-or-settings])procedure
(call-with-input-u8vector u8vector-or-settings proc)procedure
(call-with-output-u8vector u8vector-or-settings proc)procedure
(with-input-from-u8vector u8vector-or-settings thunk)procedure
(with-output-to-u8vector u8vector-or-settings thunk)procedure